BEITER  OUT  NOCK

The Beiter Out-Nock has been mainly designed for Carbon Arrowshafts, but can be used on some Aluminum-Carbon Arrows as well. The Beiter Out-Nock is available exclusively in the Beiter patented ASYMMETRIC shape.

 Remember to shoot with the Beiter logo on top!Some features of Beiter Nocks, that distinguish them from other makes:

 Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single Nock of one size comes out of the same mould.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Insert-Nock is asymmetric, to adapt perfectly to the asymmetric drawn string. To ensure the Nock is placed correctly, see that the notch for the nocking point, looks to the front.

The Beiter Insert-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for it. If used together, they avoid the arrow nocking out of the string at full draw and have ideal gliding surfaces.

FOR MORE INFORMATION HERE 

QUIVERS FOR TARGET AVALON A²

 Weight:174 gr.

- Length: 46cm

- Direction: RH and LH

- Color: Blue

- Features: 2 tubes, Incl. attachement hook, ambidextrous

The freight, for all the deliveries to the Greek area is 6,00 euros 

 BOWSTAND CARTEL MIDAS RX 10

CUSTOM BOW STRING FLEX 8190 3 colors

Our Custom Series are the next step in bowstring performance. No over servings, tight measurements, served under high tension for consistent, uniform response in your recurve bow and a distinctive feature of high quality strings, are standard on the Custom Series series strings.  
For use on all recurve competition bows.
Guide for order:
-Select Filament material :  Select the material you choice, 8125G, 8190, ASTRO FLIGHT,  ANGEL MAJESTY PRO or BCY-X
Select 8125G, 8190 or Angel Majesty-Pro for speed
Select Astro for a compromise of speed and stability
Select BCY-X for stability performance.
-Select bow size : It´s determinate by the riser and limbs sizes. If you are not sure, send us an email for help.
-Select bows string size: for same bow size, it´s more than possible different configurations by brands and riser-limb sets.  
The rule is :
-Standard sizes ( *only as reference): 64"-154cm , 66"-159cm, 68"-164 cm , 70"-169cm, 72"-174cm
-Hoyt Formula ( *only as reference) bows need 2 cm more than standard sizes.
If you have an old strings you can measure from end to end  at the internal side of the loops. This can help as start point.
We measure our strings under 50 kilos tension with two 8mm post  on the loops.
-Select number of strands : Regular basis: less strands = more speed, but more vibrations and elongation problems with high poundages.  For low poundage ( less than 34) select the lowest number of strands. For High poundage ( more than 40 pounds )  select the highest number of strands.  Always real poundage.
-Select nock size  you intended to use on the string.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros