Aluminum arrows for crossbow  150 lbs

Τthe freight is 6,00 euros for deliveries into the Greek area.

The freight is inclunding in the price for delivery in Greece.
You must be 18 years old to by an airgun

DENIX 1036

This French flintlock rifle, from the Late 1700's - early 1800's, saw service in the American battlefield as well as the European battlefields of the Napoleonic wars. It was used very effectively by the disciplined French infantry, who were highly trained in its use both as a firearm and, with the bayonet fitted, as a thrusting weapon at close quarters

Model	FRENCH RIFLE
Code	1036
Weight	2.800 gr.
Dimension	183 cm
Color	Grey & bronze
Stock	Wood
Date of manufactoring	1806
AVAILABILITY	YES

The freight is including to the price  for delivery inτο  Greece.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

Field Target Trophy 6,35

Medium-weight, extremely accurate competition pellet with flat trajectory for medium ranges. Exceptionalaerodynamic design for high impact and penetration.Tightest shot groups. Lowest rate of lead fouling andconsistent shot spreads thanks to special alloy andlubrication. Separated batches.

Model	FIELD TARGET TROPHY 6.35
Τype	domed
Cal.	6.35 mm. (.25)
Headsize	.0,2488 ¨/6.32 mm.
Footsize	.2606 " / 6,62 mm.
Weight	1,30
Weight grains	20,06
Ballistic Coefficient	0,021
10-Schot Grouping 18ft.lbs/25yds	0,944”-23,98χιλ / 1,023”- 25,98 mm.
Ballistic Soap Penetration 33ft.lbs/25yds	5,315 " / 135 mm.
Ballistic Soap Expansion 33ft.lbs/25yds	0,315 " / 8 mm.
B/C	0,028
Qty/box	200
Ideal field of use :	field target, paste control
Recommended type of weapon :	≥ 12 ft.lbs/ 16 j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

 Beiter V-Box

The Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the interchangeable membranes which have different properties. The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors.
Beiter Centralizers can be ordered with 5/16"-24 inner or outer weight adapters at no extra charge. But the V-box is compatible with almost all available stabilizer systems. On systems using a 5/16 thread, the Beiter V-BOX can be mounted on the standard thread that comes with the stabilizers, while for stabilizers using 1/14 threads, inner and outer thread adaptors to a 5/16"size are available.

. How does the Beiter V-BOX system work?
The various stabilizers on the market have different rigidities. Archers may find rods too stiff, and sometimes also too weak. With a multifunctional and customizable dampening system, such as the Beiter V-BOX, each stabilizer can be adapted to the respective shooters needs. This customization is achieved with the membranes and their different degrees of stiffness, and also through the use of the available weights and spacers. This combination can affect not only the weight distribution, but by their inertia, in combination with the Beiter V-BOX, the entire damping behaviour.

Where should, or can, the weight be attached?
Weights can be attached in front of and behind the Beiter V-BOX. An optimal set up will involve placing weights both sides of the V-BOX. #5 and #7 membranes can support max. 10 oz in front of the V-Box. Attention: the #1 membrane supports max. 5 oz. The weight of the BeiterV-BOX unit is 1.75 oz - 49grams). As an example at a total weight of 16 ounces, the weight could be distributed like this: 2 x 3 oz weights and 1 x 1 oz weight in front of the V-Box and 3x 3 oz weights behind. If you want to shoot a less stabilizer weight, the distribution of the weights can be adjusted by using the spacers. Due to the lever effect, shifting the weights forward on the screw changes weight distribution and dampening, achieving the desired balance with less weight than usual! Thanks to the combination of weights, washers and membranes in 4 different stiffnesses, innumerable different settings and options are possible.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

GRIPPER SINGLE by AAE

The new designed gripper by AAE adds to the already proven design of the original gripper.  The tapered engragement offers maximum surface area contact for the ultimate in security while using 7075 aluminum to provide the most rigid connection to the bow possible.  AAE's new proprietary BLS (Bolt Lock System) automatically micro drives the parts out when the user loosens the bolt.  The BLS prevents the unwanted seizing or binding common with anodization allowing the user to quickly and easily make minute adjustments.  Laser etched reference marks have been added to both axes to monitor the finest of movements.  The recessed mounting hole makes for a clean finished look when mounted.

V-BAR AEE ΜΟΝΟ
Material	Aluminum 7075
Color	Βlack

 

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

ARROWS CARBON AVALON HYBRID

 Hybrid is a carbon shaft produced to the tightest tolerances with a wide range of spines for the beginning archer of any age .

If you buy more than 20 pieces, the freight is free for deliveries into the Greek area.