Sight 5D series

Available for most of the more popular rifles and shotguns – the inexpensive, quality-made 5D sight. These sights are patterned after the Foolproof. They have the same strength, lightweight, and neat appearance, but without the micrometer adjustments. Designed for rugged hunting use, the 5D sights are dependable and accurate. Positive locks. Clear unobstructed vision. No knobs or side plates to blot out shooter’s field of vision. The material used in the manufacture of the Williams 5D sight is one of the highest grade alloys obtainable. There has been no sacrifice of quality as we are using one of the most expensive, highest tensile strength alloys that money can buy. Laboratory tests show that the material used has a tensile strength approximately 25% greater than mild steels. This high-grade alloy is finished with an anodize in a deep blue-black that adds even further to the strength of the sight by creating an extra hard surface. (Low line of sight)

A & F TAB ANCHOR LEATHER

·          Features a platform and an adjustable finger spacer for a consistent hand position.

·         Durable leather face material.

·         Right and left-handed models available.

·         Platform colour dependant on size.

.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

Model	Greek copis
Code	DA 518
Length	60 cm – 23,5΄΄
Description	Stainless steel with bronze handle
Weight	3,5 lbs
Length of bade	45,70 cm – 18΄΄
Length of handle	14 cm. – 5,5΄΄
Handle	Faux ivory with wire chain wrap
Material	Forged Steel

SWORD OF FILM ¨ALEXANDER THE GREAT¨

GATEWAY FEATHER 4" SHIELD RW

4" right wing feathers from Gateway

Key features:

• Precision cut, natural feather vanes for fast and forgiving arrow flight
• Shield shape
• Suitable for use on all shaft materials
• Popular size normally prefered for use on large diameter shafts
• Right wing selected for clockwise arrow rotation
• Pack of 100
• Range of attractive colours available

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

BEITER  INSERT  NOCK

The Beiter Insert-Nock has been designed to be inserted directly into Aluminum Shafts (instead of the cone or a Bushing!), but became very popular specially on Aluminum-Carbon Arrows..

 The Beiter Insert-Nock is available in both the Beiter patented ASYMMETRIC shape, as well as in the SYMMETRIC Hunter-Nock. Remember to shoot with the Beiter logo on top!

Some features of Beiter Nocks, that distinguish them from other makes:

 Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single Nock of one size comes out of the same mould.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Insert-Nock is asymmetric, to adapt perfectly to the asymmetric drawn string. To ensure the Nock is placed correctly, see that the notch for the nocking point, looks to the front.

The Beiter Insert-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for it. If used together, they avoid the arrow nocking out of the string at full draw and have ideal gliding surfaces.

 The above item is already in stock in our shop.

Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

ARIZONA NOCK - PLASTINOCK

AAE's Plastinock's have a double snap design that gives a positive string fit that allows the arrow to leave the bowstring smoothly.

Longer ears and angled throat design keeps the nock on the bowstring at any string angle.  A thin base gives the nock a perfect blend to the arrow shaft.

Available in: 1/4", 9/32", 5/16" or 11/32"

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros