|
ΒRUΝΟΧ® ΙΧ 100 SPREY 300 ML
|
Brunox ® IX 100
High - Tec - long – term corrosion inhibitor Sealing
Application and effect
long-term corrosion inhibitor Sealing for
- storage in the open air and (during the winter/summer)
- sea transport
for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.
BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.
BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.
Technische Daten
|
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
|
Appearance
|
olive-brown
|
Before use
|
shake well
|
Specific Gravity
|
0,886 ± 0,044 g/cm3
|
Dilutable
|
Can be diluted with White Spirit or Napar
With Dilution the corrosion protection interval will be also reduced.
|
Viscosity (20oC)
|
158 mPa s – 1580 mPa s thixotrop
|
Flashpoint
|
spray:<0 °C
bulk: 41 °C
|
Heat Resistance
|
max. 79 °C
|
Can be used
|
for all metals
|
Freezing Point
|
below -13 °C
spray below -41 °C
|
Drying Time
|
Not apply on humid surfaces.
Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®.
HDepending on weather conditions:
-dust-dry after approx.
1-2 h,
-hardened after approx. 12 h
|
pH-Value
|
Neutral
|
Film Property
|
Sealing
|
Film Thickness
|
25 – 50 my
|
Expected Coverage
|
ca. 20 m2/l with 25 my
|
Lubrication
|
no
|
Corrosion
Protection
|
depending on application up to 5 years
|
Consistence of the film
|
wax protection film
|
Specifications
|
No – silicon, PTFE
|
|
|
8,07EUR
|
|
|
|
MP 41 1024
|
MP - 41
The MP-41 (M.P. 41) submachine gun (9x19 Luger/Parabellum) was developed by Hugo Schmeisser, son of the Louis Schmeisser who developed the first practical machine gun, the MP-18.At the time of development of MP-41, that is, in 1941, the company C.G.Haenel,at which Schmeisser was chiefdesigner, manufactured MP-40 submachine guns for German army. It is possible that Schmeisser decided to develop a submachine gun which was better suited for infantry use than the MP-40.For this reason, he combined the receiver, action and magazine of MP-40 with the wooden stock and selective-fire mechanism of MP-28.Haenel company produced more than few MP-41 submachine guns, which were mostly purchased by SS troops, which had their own supply chains. However, late in 1941 Erma company filed a patent infringement lawsuit against Haenel, and as a result, Haenel company was forced to close the production of MP-41. Only 26 700 guns of MP-41 pattern were made during the war, and most were issued to SS, SDand police troops.
Code
|
1024
|
Weight
|
3.150 gr.
|
Dimension
|
86 cm
|
Color
|
Black metal with wooden stock
|
Date of manufactoring
|
1941
|
The freight is including in the price for delivery in Greece.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
201,63EUR
|
|
|
|
BEITER PIN NOCK # 1
|
BEITER NOCKS PIN ASYMMETRIC #1
Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.
Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.
The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.
The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.
Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.
BEITER PIN NOCK
|
Weight
|
4.32 gr
|
Colors
|
Green, Orange, White, black, blue, purple
|
Package
|
1 piece
|
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
|
|
201,63EUR
|
|
|
|
HANGER DENIX 10/L
|
HANGERS
HANGER 10/L
Bronze samurai hanger.
Model
|
10/L
|
Code
|
10/L
|
Height
|
7 cm.
|
Weight
|
150 gr.
|
There is 6 euro freight for delivery inτο Greece.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 |
|
10,08EUR
|
|
|
|
B-STINGER STABILIZER SHORT MICROHEX TARGET LONG
|
B-STINGER STABILIZER SHORT MICROHEX TARGET LONG
DESCRIPTION
Long target stabilizer from B-Stinger.
Key features:
· Wind beating, small diameter target stabilizer.
· Made of high performance countervail composite used in many professional sports and carbon.
· Excellent damping properties and reduced recoil.
· Smoother, quieter shooting experience.
· No loss of stiffness.
Technical specifications:
Outside Diameter:
|
|
Material:
|
Carbon/ Contervail
|
Short Rod Lengths:
|
10", 12" or 15" (see related items below)
|
Long Rod Lengths:
|
20", 24, 27", 30", 33" or 36"
|
Extender Lengths:
|
|
Included accessories:
|
Weight and Damper
|
Weight Thread Size:
|
|
B-STINGER STABILIZER SHORT MICROHEX TARGET LONG
|
Material
|
Carbon
|
Dimensions
|
20΄΄,24΄΄,27΄΄,30΄΄,33΄΄ and 36΄΄
|
Weight total
|
|
Color
|
White, black
|
Outsid diam.
|
|
SPECIAL ORDER
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
|
|
10,08EUR
|
|
|
|
STABILIZER ARCTEC
|
ARCTEC CROSSTUBE STABILIZER LONG
Features Arctec Crosstube stabilizers:
· Three carbon layers using cross development technology compressed to a reduced diameter adding a high degree if rigidness
· Applying Insert Technology by means of additional reinforcement of the carbon tubes with internal stabilizer frames.
· Weights can be mounted in front or behind the damper (direct approach to targets and no decoupling of the weight that is directly placed on the stabilizer)
· Through its three pillars, the Crosstube damper eliminates vibrations more than twice as fast as conventional dampers. The damper is adjustable in hardness (by addition or removal of the damper elements)
· Very low susceptibility to wind by only 16mm diameter – independent of wind direction
· Easy fine-tuning made possible through stainless steel or aluminium weights
· The stabilizer is delivered with damper and weights (an advantage over Win & Win or Easton stabilizers)
· Packaging doubles as a protective cover (transparent tube)
· Handmade in Germany (Solingen)
Specifications:
· Small-diameter three carbon layer using cross development technology rod with only 16mm diameter.
· Weight: 140 grams at 32" (without weights and damper) - the stiffest rod with this small diameter on the market - 1/4" Arctec modular damping system - stainless steel weight (35 gram) and end weight (45 gram) included.
· Optional aluminium weights with 15 grams available.
Available lengths:
· Extender in 3", 4" and 5"
· Side-rod in: 8", 10", 12" and 14"
· Long-rod in: 28", 30", 32", 34" and 36"
ARCTEC CROSSTUBE STABILIZER LONG
|
Material
|
Carbon
|
Dimensions
|
28 ",30", 32 ", 34" and 36 "
|
Weight total
|
140 gr/32 ΄΄
|
Color
|
Βlack
|
Outsid diam.
|
16 mm
|
SPECIAL ORDER
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros |
|
10,08EUR
|
|
|