BENZAMIN CROSMAN LEGASY- B8M22

The Legacy 800 is a spring-piston breakbarrel rifle that sends pellets flying out the muzzle at 800 fps. And, because it's lightweight and has an easy cocking effort, it can be an all-day shooter.The hardwood Monte Carlo stock has laser-engraved checkering on the grip and a raised cheekpiece. Front and rear fiber optic sights (rear is adjustable for windage and elevation) let you acquire targets quickly. Not one to cut corners on this rifle, Crosman gave it a two-stage adjustable trigger, a built-in scope stope and a ventilated rubber recoil pad.The Legacy 1000 is ideal for plinking and target practice, but you can also take small rodents.

FOR MANUAL PRESS HERE                                                                           FOR SPARE PARTS DRAW PRESS HERE

The freight is including in the price for delivery in Greece.
You must be 18 years old to buy an air gun

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

WARNING :Not a toy. This airgun is recommended for adult use only. Misuse or careless use may cause serious injury or death. Read all instructions before using. Buyer and user have the duty to obey all laws about the use and ownership of this airgun. You and others with you should always wear shooting glasses to protect your eyes. BE CAREFUL - SHOOT SAFELY.

 Beiter V-Box

The Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the interchangeable membranes which have different properties. The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors.
Beiter Centralizers can be ordered with 5/16"-24 inner or outer weight adapters at no extra charge. But the V-box is compatible with almost all available stabilizer systems. On systems using a 5/16 thread, the Beiter V-BOX can be mounted on the standard thread that comes with the stabilizers, while for stabilizers using 1/14 threads, inner and outer thread adaptors to a 5/16"size are available.

. How does the Beiter V-BOX system work?
The various stabilizers on the market have different rigidities. Archers may find rods too stiff, and sometimes also too weak. With a multifunctional and customizable dampening system, such as the Beiter V-BOX, each stabilizer can be adapted to the respective shooters needs. This customization is achieved with the membranes and their different degrees of stiffness, and also through the use of the available weights and spacers. This combination can affect not only the weight distribution, but by their inertia, in combination with the Beiter V-BOX, the entire damping behaviour.

Where should, or can, the weight be attached?
Weights can be attached in front of and behind the Beiter V-BOX. An optimal set up will involve placing weights both sides of the V-BOX. #5 and #7 membranes can support max. 10 oz in front of the V-Box. Attention: the #1 membrane supports max. 5 oz. The weight of the BeiterV-BOX unit is 1.75 oz - 49grams). As an example at a total weight of 16 ounces, the weight could be distributed like this: 2 x 3 oz weights and 1 x 1 oz weight in front of the V-Box and 3x 3 oz weights behind. If you want to shoot a less stabilizer weight, the distribution of the weights can be adjusted by using the spacers. Due to the lever effect, shifting the weights forward on the screw changes weight distribution and dampening, achieving the desired balance with less weight than usual! Thanks to the combination of weights, washers and membranes in 4 different stiffnesses, innumerable different settings and options are possible.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

BEITER WEIGHT

Beiter stainless steel weights. 1 oz. (5mm, ~28,35 grams) or 3 oz. (15mm, ~85 grams)

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight is 6,00€, for all the deliveries into the Greek area.

SWORD Marto 601 Odin

From the series of imaginary sword MARTO. The handle is ornate with 24k gold plated pieces and the blade forged steel 420

Odin , the chief god of Norse mythology and religion , was the son of Bestla and Bor. High Aisiron of god , the father of many of them and creator of the first human pair , in Norse mythology , the Ask and Ebla . The name means rage.

He was the god of poetry , knowledge , inspiring and war . Also considered god of wisdom and victorious .

Model	ODIN
Code	601
Total length	53.15  ΄΄
Blade length	38.78΄΄
Handle length	12.99΄΄
Open cross	11.21¨
Weight	10,5 lb  oz
Material	Forged Steel 420 A

The freight is including in the price for delivery in Greece.

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The technical characteristics and dimensions may have some slight variations from sword to sword.