Brunox ® IX 50
High – Tec – long-term corrosion inhibitor Application and effect • high-quality lubricant • long-term corrosion inhibitor for - storage and transportation for drive gear, chains, cables, slides, machines, precision tools, semi-finished and finished products, vehicles, plants and all kinds of equipment.
BRUNOX® IX 50 is a non-hardening High-Tec-two-function-product, which can be used wherever long-lasting lubrication and reliable corrosion protection is required. It forms a very compact, non-hardening anti-corrosive film, which also provides complete cover into corners and edges.
BRUNOX® IX 50 also lubricates under enormous surface pressure.
BRUNOX® IX 50 can be removed with cleaning materials (tensides) when protection is no longer required.
Physical Properties
BRUNOX® IX 50 – High – Tech – long – term corrosion inhibitor -
Appearance
olive-yellow
Expect Coverage
approx. 40 m2/l with 5 my
Specific Gravity
0,838 ± 0,02 g/cm3
Viscosity (20oC)
25 mPa s – 120 mPa s thixotrop
Lubrication
Bruggertest/DIN 51347 48 N/mm2
Flashpoint
Aerosol:<0 °C Bulk: 51 °C
Consistence of the film
film non-hardening
Heat Resistance
up to 150 °C short time up to 100 °C permanent
Before use
shake well
Can be used
for all metals
Freezing Point
below -41°C
Drying Time
evaporation of the solvents within 2-4 h Hdepending on weather conditions
pH-Value
neutral
Corrosion Protection
Indoor: up to 3 years Outdoor: up to ½ year Covered outdoor : up to 1 year If you like a longer protection, control the film and renew it, if necessary
Film Property
penetrating
Film Thickness
5 – 20 my
Specifications
No -silicon -resins, -PTFE - acids
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
Brunox ® IX 100
High - Tec - long – term corrosion inhibitor Sealing
Application and effect long-term corrosion inhibitor Sealing for - storage in the open air and (during the winter/summer) - sea transport for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.
BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.
BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.
Technische Daten
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
olive-brown
0,886 ± 0,044 g/cm3
Dilutable
Can be diluted with White Spirit or Napar With Dilution the corrosion protection interval will be also reduced.
158 mPa s – 1580 mPa s thixotrop
spray:<0 °C bulk: 41 °C
max. 79 °C
below -13 °C spray below -41 °C
Not apply on humid surfaces. Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®. HDepending on weather conditions: -dust-dry after approx. 1-2 h, -hardened after approx. 12 h
Neutral
Sealing
25 – 50 my
Expected Coverage
ca. 20 m2/l with 25 my
no
depending on application up to 5 years
wax protection film
No – silicon, PTFE
Brunox ® LUB & COR
High-Tec Maintenanceproduct
Application and effect
We are glad to present you our newest product BRUNOX® LUB & COR.
BRUNOX® LUB & COR sets new standards. At least we have realised the highly desired High-Tec-long-term corrosion inhibitor and lubricant in an attractive package.
Thanks to your suggestions we have chosen an attractive and very eco-friendly package. We are convinced that BRUNOX® LUB & COR would be a great hit for the private collector, huntsman and sport shooter.
When firearms are used, stored or transported in high humidity or in aggressive climatic conditions, they need a corrosion inhibitor which is reliable. BRUNOX® LUB & COR made it possible to protect the firearm over years.
Especially for professionals, as the police, military and hunters, it’s very important that, when the weapon is not used but is exposed to all weathers, they don’t need to preserve it every day. BRUNOX® LUB & COR protects against corrosion for about a year when the weapon is placed outdoor but under a roof. Under open air it’s protected for about half a year and indoor up to 3 years.
BRUNOX® LUB & COR forms a very thin, viscous protection film of 5-10my, which does not harden. Before using the firearm the film has to be removed with a soft absorbent cloth. The barrel should be completely clean before firing.
BRUNOX® LUB & COR is even more. It prevents not only against CORROSION but is also a LUBRICANT, a High-Tec-Lubricant for semiautomatic firearms.
RUAG, Anschütz, and Merkel have tested the usage on semiautomatic firearms and have been very enthusiastic. This product is unique and, like BRUNOX® Gun Care Spray, a product with a good price and quality relation. It contains no silicone, no PTFE and no graphite and will be available in the convienient 100ml .
Lensolux 3-step Remote Switch Remote 3-step-switch for LED flashlight TLS 1500 F (Nr. 817318). Power: 30% - 60% - 100% - OFF.
The freight is 6,00 € for delivery in Greece. The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight is 6,00 € for delivery in Greece.
CORTE MARRON MOYEN
Especially designed for intensive use. Mid uppers. 1,8mm nubuck and Nylon Cordura. Breathable membrane. Milled soles. Rubber stone-guards. Removable insoles.
Model
CORTE
Size
40-46
Material
Nubuck
Color
Marron
THE FREIGHT IS 6,00 € FOR DELIVERY INTO GREECE