Brunox ® IX 100

High - Tec - long – term corrosion inhibitor Sealing

Application and effect
long-term corrosion inhibitor Sealing for
- storage in the open air and (during the winter/summer)
- sea transport
for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.

BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.

BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.

Technische Daten
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
Appearance		olive-brown	Before use	shake well
Specific Gravity		0,886 ± 0,044 g/cm3	Dilutable	Can be diluted with White Spirit or Napar With Dilution the corrosion protection interval will be also reduced.
Viscosity (20oC)	158 mPa s – 1580 mPa s thixotrop
Flashpoint	spray:<0 °C bulk: 41 °C
Heat Resistance		max. 79 °C	Can be used	for all metals
Freezing Point		below -13 °C spray below -41 °C	Drying Time	Not apply on humid surfaces. Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®. HDepending on weather conditions: -dust-dry after approx. 1-2 h, -hardened after approx. 12 h
pH-Value		Neutral
Film Property		Sealing
Film Thickness		25 – 50 my
Expected Coverage		ca. 20 m2/l with 25 my
Lubrication		no	Corrosion Protection	depending on application up to 5 years
Consistence of the film		wax protection film	Specifications	No – silicon, PTFE

Arizona Clicker Black With Extender

The clicker is the accessory that serves in Sagittarius, so to understand when the arrow has come to release position. This is achieved thanks to the sound produced by the steel sheet metal that is released when the arrow comes in this position.

Breech 1377

Now you, the airgun hobbyist, can attach your favorite dovetail accessories to your 1377, 1740, 1760 and PC77. This Steel Breech kit not only has a superior look, but it alleviates the need to purchase separate parts. With an all-steel construction, it provides durability which in turn may improve your accuracy. With just the use of the two hex wrenches included and a flat-head screwdriver, this breech will be attached and ready for your accessories.

This breech will not fit the older 1377 pistols with a sliding breech cover!

Does not support mounting of original rear sight

WILL support mounting of the LPA MIM sight

Dovetail groove

This kit may be attached to Crosman airgun model numbers 1377, 1740, 1760 and PC77.

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

Shoot-off Master

The Shoot-off Classic is only sold by 4 lenses kit + additionnal lenses.

Available Shoot-off Classic - lenses : N° 1- 2-3-4-5-6-7- 8 – 9 – 10- 11- 12-13-14-15- 16- 17-18 – 19 – 20 – 21 -22 -23 -24.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight is 6,00€, for all the deliveries into the Greek area.  

 NEGRINI  Case Recurve

ECONOMIC CASES IN INJECTED POLYPROPYLENE

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 16,00 euros

HANGERS

HANGER 11/G

Grey gun hanger ΄΄Lis Flower΄΄.

Model	11/G
Code	11/G
Height	9 cm.
Weight	170 gr.

There is 6 euro freight for delivery inτο  Greece.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

MP - 41

The MP-41 (M.P. 41) submachine gun (9x19 Luger/Parabellum) was developed by Hugo Schmeisser, son of the Louis Schmeisser who developed the first practical machine gun, the MP-18.At the time of development of MP-41, that is, in 1941, the company C.G.Haenel,at which Schmeisser was chiefdesigner, manufactured MP-40 submachine guns for German army. It is possible that Schmeisser decided to develop a submachine gun which was better suited for infantry use than the MP-40.For this reason, he combined the receiver, action and magazine of MP-40 with the wooden stock and selective-fire mechanism of MP-28.Haenel company produced more than few MP-41 submachine guns, which were mostly purchased by SS troops, which had their own supply chains. However, late in 1941 Erma company filed a patent infringement lawsuit against Haenel, and as a result, Haenel company was forced to close the production of MP-41. Only 26 700 guns of MP-41 pattern were made during the war, and most were issued to SS, SDand police troops.

Code	1024
Weight	3.150 gr.
Dimension	86 cm
Color	Black metal  with wooden stock
Date of manufactoring	1941

The freight is including in the price for delivery in Greece.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425