REPLACEMENT STICKER 80 MM FITA 40
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
Brunox ® LUB & COR
High-Tec Maintenanceproduct
Application and effect
We are glad to present you our newest product BRUNOX® LUB & COR.
BRUNOX® LUB & COR sets new standards. At least we have realised the highly desired High-Tec-long-term corrosion inhibitor and lubricant in an attractive package.
Thanks to your suggestions we have chosen an attractive and very eco-friendly package. We are convinced that BRUNOX® LUB & COR would be a great hit for the private collector, huntsman and sport shooter.
When firearms are used, stored or transported in high humidity or in aggressive climatic conditions, they need a corrosion inhibitor which is reliable. BRUNOX® LUB & COR made it possible to protect the firearm over years.
Especially for professionals, as the police, military and hunters, it’s very important that, when the weapon is not used but is exposed to all weathers, they don’t need to preserve it every day. BRUNOX® LUB & COR protects against corrosion for about a year when the weapon is placed outdoor but under a roof. Under open air it’s protected for about half a year and indoor up to 3 years.
BRUNOX® LUB & COR forms a very thin, viscous protection film of 5-10my, which does not harden. Before using the firearm the film has to be removed with a soft absorbent cloth. The barrel should be completely clean before firing.
BRUNOX® LUB & COR is even more. It prevents not only against CORROSION but is also a LUBRICANT, a High-Tec-Lubricant for semiautomatic firearms.
RUAG, Anschütz, and Merkel have tested the usage on semiautomatic firearms and have been very enthusiastic. This product is unique and, like BRUNOX® Gun Care Spray, a product with a good price and quality relation. It contains no silicone, no PTFE and no graphite and will be available in the convienient 100ml .
The freight is 6,00 € for delivery into the Greece area.
AVALON CLASSIC CARBON ARROWS
Full carbon arrow with straightness tolerance of ± .005" - Pin with small groove pin nock and EP-23 vanes - Break-off points - Both available in full length or cut with glued-in points Ideal arrow for the starting competition archer
SIZE
SHAFT WEIGHT
Grains/inch
SPINE
LENGTH
inch
WEIGHT OF POINTS
grains
NOCK
1000
5.25
32
60-80
PIN NOCK
900
6.05
29
800
6.08
30
80-100
700
6.52
600
7.28
31
BRUNOX Gun Care ® can 100 ml for hunting-, sporting-, professional and collecting-guns
- cleans, lubricates and attends all metal parts - displaces humidity and protects reliable against corrosion - loosens powder-, lead-, tombac-, copper-, nickel- and black powder- residues - neutralizes hand sweat
•Excellent penetration properties; it will be formed a very thin, viscous protection film, which does not harden and become resin (contains no silicone, no PTFE, no graphite). •ehaves neutral against varnish, leather, wood, rubber, plastic and fabric. •Prevents from leak currents as contact spray. The additive TUBOLINE increases the gliding quality of all movable parts; ensures the function of repeat and automatic guns even at temperatures up to -55 °C. BRUNOX® Gun Care loosens grease, organic and mineral dirt. BRUNOX® Gun Care is available as aerosol, which contains only 3% propellant (CO2) or as bulk product. It has a flash point of 78°C.
Physical Properties
BRUNOX® Turbo-Liquide with TURBOLINE –
Appearance
transparent-bluish
Film Thickness
1 – 2 my
Specific Gravity
0,81 ± 0,03 g/cm3
Expect Coverage
approx. 100 – 110 m2/l
Viscosity (20oC)
3,6 mPa s
Lubrication
Bruggertest DIN 51347 22 N/mm2
Flashpoint
78 °C
Consistence of the film
Film non-hardening
Heat Resistance
up to 160 °C short time up to 125 °C permanent
Dielectric Strength
UD: 45 KV eff-ED: 182 KV eff/cm
Freezing Point
-54 °C
Drying Time
evaporation of the solvents within 2-4 h. H depending on weather conditions
pH-Value
neutral
Corrosion Protection
up to 12 months indoor
Film Property
penetrating
Specification
contains no silicon, PTFE, graphite
Sight 5D series
Available for most of the more popular rifles and shotguns – the inexpensive, quality-made 5D sight. These sights are patterned after the Foolproof. They have the same strength, lightweight, and neat appearance, but without the micrometer adjustments. Designed for rugged hunting use, the 5D sights are dependable and accurate. Positive locks. Clear unobstructed vision. No knobs or side plates to blot out shooter’s field of vision. The material used in the manufacture of the Williams 5D sight is one of the highest grade alloys obtainable. There has been no sacrifice of quality as we are using one of the most expensive, highest tensile strength alloys that money can buy. Laboratory tests show that the material used has a tensile strength approximately 25% greater than mild steels. This high-grade alloy is finished with an anodize in a deep blue-black that adds even further to the strength of the sight by creating an extra hard surface. (Low line of sight)
BEITER ARMGUARD
INFORMATIONS HERE
SF OPTIMO +
Optimo+ is the perfect bow to start and progress! As light as accurate, this bow is being manufactured the same way than the others SF ARCHERY bow series (laminated wood riser, layers of wood and f ber glass into the limbs) and ready for an intense use as per the clubs. You will find all screw holes allowing the use of a sight, a stabilizer and a cushion plunger.
SF ARCHERY OPTIMO +
Handle
Right or left hand
Length of handle
14.5-19.5-20-22-24”
Limbs
48”-54”-58”-64”-66”-68”-70”
Weight
10-40 lbs
String
Dacron 48/54/58/64/66/68/70” – 12 str.
The above item will be in stock in our shop from middle of November
Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
We include the freight in the prices, for all the deliveries to the Greek area.