Micrometer adjustable sights FP series

Internal micrometer adjustments have positive internal locks.  The FP is strong, rugged, dependable.  The alloy used to manufacture this sight has a tensile strength of 85,000 pounds.  Yet, the FP is light and compact, weighing only 1-1/2 ounces.  For grooved receivers on Airguns and .22 rifles (High line of sight)

 Sight 5D series

Available for most of the more popular rifles and shotguns – the inexpensive, quality-made 5D sight. These sights are patterned after the Foolproof. They have the same strength, lightweight, and neat appearance, but without the micrometer adjustments. Designed for rugged hunting use, the 5D sights are dependable and accurate. Positive locks. Clear unobstructed vision. No knobs or side plates to blot out shooter’s field of vision. The material used in the manufacture of the Williams 5D sight is one of the highest grade alloys obtainable. There has been no sacrifice of quality as we are using one of the most expensive, highest tensile strength alloys that money can buy. Laboratory tests show that the material used has a tensile strength approximately 25% greater than mild steels. This high-grade alloy is finished with an anodize in a deep blue-black that adds even further to the strength of the sight by creating an extra hard surface. (Low line of sight)

W&W  V-BAR CX 2 CARBON

Though most shock that occurs when shooting is absorbed by a stabilizer and V-Bar, some vibration returns to the riser and makes consistent accuracy difficult.

WIN&WIN’s new CX2 V-Bar is designed to absorb shock more efficiently, and increase shooting consistency by minimizing the vibration that returns back into the riser..

BRUNOX LUBRI FOOD ® 100 ML

brunox® lubri-Food®
High – Tec – Allrounder for the food industry

Product description
Lubricant, protection, creep oil and cleaning agent appropriate for occasional technically unavoidable contact to food, is NSF H1 registered (N° 136783 and N°137856).

Mode of working
A high-tech-product that does not become resinous and is produced from NSF H1 registered ingredients. It forms a homogeneous and very efficient lubricating film which displaces humidity and protects against corrosion. BRUNOX® Lubri-Food® has an excellent penetration that guarantees an excellent loosening effect, it can also be used for the removal of boiler scale and makes tightened parts movable.

Application area
All aspects of the food industry, from maintenance of production line equipment and food packaging machinery as well for agriculture, restaurant and hotel business. Can also be used by manufactures of food industry tools and equipment and machinery.

Object
To reduce friction and wear and therefore increases the life span of expensive food production equipment.

Application
Warning please ensure, that the electricity supply is disconnected before applying BRUNOX® Lubri-Food®.

Apply a light, even film and allow BRUNOX® Lubri-Food® to react.
Only apply as much BRUNOX® Lubri-Food® as it is absolutely necessary to obtain the desired technical result.
Wipe off excess with cloth.
BRUNOX® Lubri-Food® should contact food as little as possible despite its official NSF H1 registration.

Physical Properties
BRUNOX® Lubri-Food® – High-Tec-Allrounder for the food industry –
Appearance	Transparent	Film Thickness	3 – 4 my
Specific Gravity	0,83 ± 0,02 g/cm3	Expect Coverage	approx. 100 – 120 m2/l
Viscosity (20oC)	85 mPa s	Lubrication	Bruggertest/DIN 51347 25 N/mm2
Flashpoint	73 °C	Consistence of the film	film does non-hardening
Heat Resistance	up to 155 °C short time up to 125 °C permanent	Protection	-displaces humidity -stops limestone
Freezing Point	below -20 °C	Can be used	for all metals
pH-Value	neutral	Specifications	- NSF H1 registered N° 136783 and N° 137856 - drinking water certificate - froth certificate - Kosher certificate - contains no: silicon, PTFE, resins, acids
Film Property	penetrating

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

MANTISX SHOOTING PERFORMANCE SYSTEM X8

Shot analysing tool from MantisX

Key features:

·      Allows for precise tracking of your point of aim in your shot sequence

·      Tracks and measures your every move

·      Data is captured and streamed directly to your smartphone or tablet

·      Real-time feedback

Included accessories:

·      Mantis X8

·      Universal Adapter

·      Protective travel case

.

Sample is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

SECURA HUNTING 7 χιλ. 50/60

Arrows of carbon suitable for hunters

model	TARGET 3D 7mm. 50/60
spine	50/60
weight	17,6 gram.
length	77 cm
wings	Arizona  4,2”
nock	external
nose	Screw in adaptor
diameter	7 mm.

If you buy more than 10 items, the freight is free for deliveries into the Greek area.

 KSL TRIPLE FLETCHING TAPE x10

Pre-cut lining tapes with scale printed to secure to apply the same length for each arrow. Regular width for front,  narrow width for back.  They are included 10 x 2 pieces in each package. Made for the KSL TAPE JIG.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros