Brunox ® IX 50

High – Tec – long-term corrosion inhibitor
Application and effect
• high-quality lubricant
• long-term corrosion inhibitor for - storage and transportation  for drive gear, chains, cables, slides, machines, precision tools, semi-finished and finished products, vehicles, plants and all kinds of equipment.

BRUNOX® IX 50 is a non-hardening High-Tec-two-function-product, which can be used wherever long-lasting lubrication and reliable corrosion protection is required.
It forms a very compact, non-hardening anti-corrosive film, which also provides complete cover into corners and edges.

BRUNOX® IX 50 also lubricates under enormous surface pressure.

BRUNOX® IX 50 can be removed with cleaning materials (tensides) when protection is no longer required.

Physical Properties
BRUNOX® IX 50 – High – Tech – long – term corrosion inhibitor -
Appearance		olive-yellow	Expect Coverage	approx. 40 m2/l with 5 my
Specific Gravity		0,838 ± 0,02 g/cm3
Viscosity (20oC)		25 mPa s – 120 mPa s thixotrop	Lubrication	Bruggertest/DIN 51347 48 N/mm2
Flashpoint		Aerosol:<0 °C Bulk: 51 °C	Consistence of the film	film non-hardening
Heat Resistance		up to 150 °C short time up to 100 °C permanent	Before use	shake well
			Can be used	for all metals
Freezing Point		below -41°C	Drying Time	evaporation of the solvents within 2-4 h Hdepending on weather conditions
pH-Value		neutral	Corrosion Protection	Indoor: up to 3 years Outdoor: up to ½ year Covered outdoor : up to 1 year If you like a longer protection, control the film and renew it, if necessary
Film Property	penetrating
Film Thickness	5 – 20 my		Specifications	No -silicon -resins, -PTFE - acids

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

H&N Baracuda Match 4.50 – 4.51 – 4.52 -4.53

Heavy, extremely accurate pellet for long ranges. First-class aerodynamic design for high impact and penetration. Tightest shot groups. Lowest rate of lead fouling and consistent shot spreads thanks to special alloy and lubrication. Specially chosen. Head sizes available: 4.50-4.53. Smooth.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 50,00 € OF  PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6,00 € FOR DELIVERY INTO GREECE

 Beiter V-Box

The Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the interchangeable membranes which have different properties. The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors.
Beiter Centralizers can be ordered with 5/16"-24 inner or outer weight adapters at no extra charge. But the V-box is compatible with almost all available stabilizer systems. On systems using a 5/16 thread, the Beiter V-BOX can be mounted on the standard thread that comes with the stabilizers, while for stabilizers using 1/14 threads, inner and outer thread adaptors to a 5/16"size are available.

. How does the Beiter V-BOX system work?
The various stabilizers on the market have different rigidities. Archers may find rods too stiff, and sometimes also too weak. With a multifunctional and customizable dampening system, such as the Beiter V-BOX, each stabilizer can be adapted to the respective shooters needs. This customization is achieved with the membranes and their different degrees of stiffness, and also through the use of the available weights and spacers. This combination can affect not only the weight distribution, but by their inertia, in combination with the Beiter V-BOX, the entire damping behaviour.

Where should, or can, the weight be attached?
Weights can be attached in front of and behind the Beiter V-BOX. An optimal set up will involve placing weights both sides of the V-BOX. #5 and #7 membranes can support max. 10 oz in front of the V-Box. Attention: the #1 membrane supports max. 5 oz. The weight of the BeiterV-BOX unit is 1.75 oz - 49grams). As an example at a total weight of 16 ounces, the weight could be distributed like this: 2 x 3 oz weights and 1 x 1 oz weight in front of the V-Box and 3x 3 oz weights behind. If you want to shoot a less stabilizer weight, the distribution of the weights can be adjusted by using the spacers. Due to the lever effect, shifting the weights forward on the screw changes weight distribution and dampening, achieving the desired balance with less weight than usual! Thanks to the combination of weights, washers and membranes in 4 different stiffnesses, innumerable different settings and options are possible.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

SWORD Marto 337.1 CHARLES THE 5^th

Charles the fifth (1500-1558 AD), the son of Philip and Joanna of 1519, who succeeded Maximilian (father's father), was Emperor of the Holy Roman Emperor and Archduke of Austria and was under the domination of an area of ​​4,000,000 square kilometers, in Europe, America and the Far East. They said it then, that the empire of the sun never sets. The kingdom became successful, though costly, Italian wars against the French, the conquest of Mexico and Peru, and the first circumnavigation of the Earth, from Magellan.

A copy of the sword Charles V built the famous sword maker, MARTO. The sword consists of gold-plated handle. The blade is forged steel 440 AISI symbols engraved on the blade.

Model	CHARLES THE 5th
Code	337.1
Total length	47,24  ΄΄
Blade length	37,00΄΄
Handle length	8,66΄΄
Open cross	9,00¨
Weight	7lb  oz
Material	Forged Steel 440

The freight is including in the price for delivery in Greece.

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The technical characteristics and dimensions may have some slight variations from sword to sword.

Tanto 4015 of  EDO period(16^th century).

Model	4015
Code	4015
Total length	56 cm.
Length of blade	32 cm
Length of handle	16 cm
Description	Blue with bronze tsoumba and spines on the handle.
Weight	1750 gram.
Material	Zinc alloy

There is not freight for delivery inτο  Greece.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

 HOYT COMPOUND BOW INVICTA 40 SVX 2020

Longer and lighter weight riser design.

Stable riser design for incredible aim and hold.

Included, interchangeable grips offer a selection

of angles and heights for the best fit and optimal pressure

 through the grip. Can also be used to shorten draw length

 to find the perfect spot.

Quiet and smooth shot experience with extreme vibration

 removing design.

Featuring Hoyt’s high performance SVX cam for a hard stop,

 smooth draw and fast arrow speeds.

Adjustable, torque reducing cable guard design.

Selection of attractive, satin finish, anodized colours options.

Complete set of modules included for the cam size.

Technnical specifications: