BEITER  IN-OUT  NOCK

The Beiter Hunter Nock was designed for Compound Archers with D-Loop. Hunter Nocks are "symmetric" because only with this shooting style release and nock are in one line, that means this is the only symmteric way to shoot in archery.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single Nock of one size comes out of the same mould.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and - very important - the Beiter Nock guarantees constant release from the bowstring, shot after shot!

The Beiter Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for it, having ideal gliding surfaces.

FOR MORE INFORMATIONS PLEASE PRESS HERE

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

Crosman DS 177/250

.177 caliber, 7.9 grain Pointed with dished rim Revolutionary new hunting pellet combining the best attributes of a pointed pellet with a hollow point resulting in complete expansion and energy transfer.

Model	LSP 77
Τype	pointed
Cal.	4,5 χιλ. (.177)
Head size	4,50 χιλ.
Weight	0,51
Weight grains	7,90
Qty/box	250 / TIN
Ideal field of use :	plinking, paste control
Recommended type of weapon :	5,5-12 ft.lbs/ 7,5-16 j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

Cartel Midas Magnetic Clicker

 Highly functional and low cost magnetic clicker comes with a 6-32, and fit most recurve bow.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

 Beiter V-Box

The Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the interchangeable membranes which have different properties. The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors.
Beiter Centralizers can be ordered with 5/16"-24 inner or outer weight adapters at no extra charge. But the V-box is compatible with almost all available stabilizer systems. On systems using a 5/16 thread, the Beiter V-BOX can be mounted on the standard thread that comes with the stabilizers, while for stabilizers using 1/14 threads, inner and outer thread adaptors to a 5/16"size are available.

. How does the Beiter V-BOX system work?
The various stabilizers on the market have different rigidities. Archers may find rods too stiff, and sometimes also too weak. With a multifunctional and customizable dampening system, such as the Beiter V-BOX, each stabilizer can be adapted to the respective shooters needs. This customization is achieved with the membranes and their different degrees of stiffness, and also through the use of the available weights and spacers. This combination can affect not only the weight distribution, but by their inertia, in combination with the Beiter V-BOX, the entire damping behaviour.

Where should, or can, the weight be attached?
Weights can be attached in front of and behind the Beiter V-BOX. An optimal set up will involve placing weights both sides of the V-BOX. #5 and #7 membranes can support max. 10 oz in front of the V-Box. Attention: the #1 membrane supports max. 5 oz. The weight of the BeiterV-BOX unit is 1.75 oz - 49grams). As an example at a total weight of 16 ounces, the weight could be distributed like this: 2 x 3 oz weights and 1 x 1 oz weight in front of the V-Box and 3x 3 oz weights behind. If you want to shoot a less stabilizer weight, the distribution of the weights can be adjusted by using the spacers. Due to the lever effect, shifting the weights forward on the screw changes weight distribution and dampening, achieving the desired balance with less weight than usual! Thanks to the combination of weights, washers and membranes in 4 different stiffnesses, innumerable different settings and options are possible.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

 HOYT COMPOUND BOW INVICTA 40 SVX 2020

Longer and lighter weight riser design.

Stable riser design for incredible aim and hold.

Included, interchangeable grips offer a selection

of angles and heights for the best fit and optimal pressure

 through the grip. Can also be used to shorten draw length

 to find the perfect spot.

Quiet and smooth shot experience with extreme vibration

 removing design.

Featuring Hoyt’s high performance SVX cam for a hard stop,

 smooth draw and fast arrow speeds.

Adjustable, torque reducing cable guard design.

Selection of attractive, satin finish, anodized colours options.

Complete set of modules included for the cam size.

Technnical specifications: