N. ΠΑΠΑΔΑΚΗΣ Α.Ε.

The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or the End Serving on the string (e.g. if you want to move the Nocking Point).

Not only – and much more important! – it allows to „compact“ the serving.

In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.

Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!

The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver ready to be used!

You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

8,24EUR

BEITER CLICKER

Beiter Clicker

The clicker is the accessory that serves in Sagittarius, so to understand when the arrow has come to release position. This is achieved thanks to the sound produced by the steel sheet metal that is released when the arrow comes in this position.

The Beiter Clicker has been used and appreciated since its introduction, thanks to the fact that it suits almost all Handles on the market, due to the different available models. Different colours of the Klicker Blade and many different components can individually adapt the Klicker to the archer's needs.

For more informations press here

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

8,24EUR

HOYT COMPOUND BOW INVICTA 40 SVX 2020

HOYT COMPOUND BOW INVICTA 40 SVX 2020

Longer and lighter weight riser design.

Stable riser design for incredible aim and hold.

Included, interchangeable grips offer a selection

of angles and heights for the best fit and optimal pressure

through the grip. Can also be used to shorten draw length

to find the perfect spot.

Quiet and smooth shot experience with extreme vibration

removing design.

Featuring Hoyt’s high performance SVX cam for a hard stop,

smooth draw and fast arrow speeds.

Adjustable, torque reducing cable guard design.

Selection of attractive, satin finish, anodized colours options.

Complete set of modules included for the cam size.

Technnical specifications:

Material:	Aluminium
Axle-to-axle:	40.25"
Bracing height:	7.25"
Poundage options:	30-40, 40-50 or 50-60
Mass weight:	2227
Let-off:	65%
Draw length options:	Cam 2: 27-28, Cam 3: 28.5-29.5 Cam 4: 30-31, Cam 5: 31.5-32
Speed rating:	325 fps
Cam:	SVX
Limb:
Finish:	Anodized

8,24EUR

With choosen: