Brunox® turbo-spray® 400ml
5 function - spray with Turboline
Application for • maintenance •cleaning • repair works • production • storage • transportation of machines, precision tools, semi-finished and finished products, vehicles, plants and electrical instruments of all kinds
BRUNOX® Turbo-Spray®, the only multi-function-spray with the additive TUROBLINE which guarantees a high capillary effect and the best coverage (100 – 120 m2/l). BRUNOX® Turbo-Spray® is sprayed on to metal surfaces, displaces water and provides protection against humidity and aggressive environmental influences such as acid atmospheres, chimney gas-steams etc.. By applying BRUNOX® Turbo-Spray® an invisible, compact 1 – 2 my thick non-hardening anti-corrosive film is formed, providing reliable protection. BRUNOX® Turbo-Spray® can be removed without difficulty with cleaning materials (tensides).
Application and effect
Lubricant
BRUNOX® Turbo-Spray® is a long-term lubricant based on a balanced mixture of hydrocarbons with the additive TURBOLINE.
Creep oil / Rust loosener
BRUNOX® Turbo-Spray® is a multi-component lubricant which has an excellent penetration effect. Therefore it is capable of penetrating into finest hair-chaps and spaces and, for example, loosens tightened screws in a very short time. It loosens rust and frees sticky mechanisms.
Anti-corrosion
BRUNOX® Turbo-Spray® guarantees complete corrosion protection and also conservation of hollow spaces. The hydrocarbon mixture which is responsible for this guarantees both a compact protection film and also the necessary film thickness which displaces any humidity. It forms a clear, invisible, non-hardening film which does not need to be removed in most cases. (Exception: painting). This film provides temporary protection against corrosion (approx. 6 months) and has a dirt repelling effect.
Cleaning agent
BRUNOX® Turbo-Spray® penetrates and removes mineral and organic dirt so that spots of (almost) all kinds (e.g. tar, brake dust, adhesive residues etc.) can be easily wiped off. It neutralizes hand sweat and also protects aluminum, copper, brass, chromium plated and galvanized sheet metal and stainless steel.
Contact spray
BRUNOX® Turbo-Spray® has a very low surface tension and a corresponding adhesion to metals so that leak currents will be prevented and humidity which has penetrated will immediately be displaced. It is suitable for the corrosion protection of electrical contacts in low-voltage engineering. Before spraying on electrical or electronic equipment, switch off the devices. The very high dielectric strength (UD=45KV/cm) also allows the application in connection with very sensitive (high-impedance) circuits. This property is particularly useful with electrical contacts and short circuits can be eliminated and prevented.
properties
BRUNOX® Turbo-Spray® contains • no silicone, • no PTFE • no graphite BRUNOX® Turbo-Spray® behaves neutral against • varnish, leather, wood, rubber, plastic and fabric BRUNOX® Turbo-Spray® contains • just 3% propellant (CO2), i.e. 97% active substance BRUNOX® Turbo-Spray® has • a flash point of 78oC
Physical Properties
BRUNOX® Turbo-Spray – 5- function-spray with TURBOLINE –
Appearance
transparent-bluish
Film Thickness
1 – 2 my
Specific Gravity
0,82 ± 0,02 g/cm3
Expect Coverage
approx. 100 – 120 m2/l
Viscosity (20oC)
3 mPa s
Lubrication
Bruggertest DIN 51347 23 N/mm2
Flashpoint
78 °C
Consistence of the film
Film non-hardening
Heat Resistance
up to 160 °C short time up to 125 °C permanent
Dielectric Strength
UD: 45 KV eff-ED: 182 KV eff/cm
Freezing Point
-51 °C
Drying Time
evaporation of the solvents within 2-4 h. H depending on weather conditions
pH-Value
neutral
Corrosion Protection
up to 12 months indoor
Film Property
penetrating
Specification
contains no silicon, PTFE, graphite
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
VERNEY CARRON “ JET – 16 ”
An ideal weapon for those who want a gun for all hunts. Base from steel with 71 cm barrels, weight 3,000 kilos, stripe 7mm, pressure tested to 1370. Triggers 2 oil gun stock walnut. Extractors
Model
JET 16
Code order
Weight
3.000 kg
System
Cal.
16 cal. /70
Overall length
115 c m
Capacity
2
choke
5 chokes
Rib
7 mm
wood
Sanded and oiled walnut
Sling swivels
Provided
ejections
extractors
triggers
receiver
steel
stock
pistole
Proof tested
1370
SHOOTING CHRONY M -1
Gives Numbered Shot Velocities; + Velocity stays on display until you shoot again; + Uses 9 Volt Alkaline Battery with 48 hours of continuous use; + Stereo Jack for optional Remote Control or Chrony Ballistic Printer. The Chrony Ballistic Printer, will also function as a Remote Control. It prints velocities as you shoot and, on real paper. When done shooting, press STAT button on Printer and it will print Hi, Low and Average-velocities, Extreme Spread and Standard Deviation. !! This information becomes available only if and when the F-1 Chrony is used together with the Remote Control or the Chrony Ballistic Printer. !! + Upgrades to Alpha, Beta or Gamma Shooting Chrony or Master Chrony
CHRONY M-1
Speed measurement
Feet per second
Max. number of shots / Measuring
32
Material
20 gauche steel
Dimensions (closd) (l x w x h)
19,05 cm x 11,45 cm x 7,00 cm
1.150 gr
Alkaline Battery
9 Volt
FOR MANUAL PRESS HERE
The freight is including in the price for delivery in Greece. The tripod is not including to the price
The above item is already in stock in our shop. Address: 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
Katana 9110 of period EDO (16th century).
9110
Code
Total length
92 cm.
Length of blade
64 cm
Length of handle
23 cm
Description
Wooden with bronze tsoumba and traditional knitting on the handle
1340 gram.
Zinc alloy
There is not freight for delivery inτο Greece.
AVALON TYRO Case Recurve
ECONOMIC CASES IN INJECTED POLYPROPYLENE
Dimensions
outside
inside
Length
86 cm.
85 cm.
Width
34 cm.
30 cm.
Depth
13 cm.
12 cm.
2,800 kg
The freight, for all the deliveries to the Greek area is 15,00 euros
BEITER BUTTON
The Beiter Plunger is produced out of precision machined parts (the Beiter company supplies the watch-, precision-mechanic- and medical industry and is used to work only with the finest materials). The notching scale cylinder allows an exact and reproducible spring tension time after time.
The thread cylinder is made out of high-grade refined steel, the springs out of stainless harmonic steel, the notching scale cylinder and the slotted nut out of anodised aluminum. The material used for the Plunger Pin offers excellent glide- and wear-behaviour by using aluminum-, aluminum-carbon- or carbon-arrows.
Codes 101159-1012, 1060, 1072 & 1120 are usually turnkey else come to order. Please contact us for availability or ordering
Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
STABILIZER CARTEL DYNAMIC CARBON SHORT 8
Redesigned with vibration damping rubber is suitable for old and young archers.
ΣΤΑΘΕΡΟΠΟΙΗΤΗΣ DYNAMIC CARBON
Carbon
Dimensions ΄΄
8
10
12
Weight grams
133
134
144
Color
Black
Outsid diam.
17 mm.
BEITER WRENCH SET FOLDING
· The Beiter Bow Wrench has been developed especially for archers by Werner Beiter together with the leading German Tool Company WIHA.
· The base for the Beiter Bow Wrench is the unique WIHA Pocketstar, with its not common featuers.
· The Beiter Bow Wrench includes 11 Hex Wrenches (8 inches, 3 metric) and one little screw driver. Due to the patented push out knob you can easily open the tool and take out the wrenches ONE AT A TIME!!!
· The metric keys can be for example used for the Beiter Plunger or the Beiter Centralizer, but also for Shibuya Sights and many other products not produced in the US.
·
dimensions
11,5 x 3.5 x 3 cm
155 gram.
black
Dimensions of allen
1,5-2,5-3 mm, sl 2.8, 3/32-1/8-9/64-5/32-3/16-7/64-5/64-1/16