Beiter Compensation Spacer

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight is 6,00€, for all the deliveries into the Greek area. 

Hephaestus Stabilizer Weights 4oz

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight is 6,00€, for all the deliveries into the Greek area. 

 Beiter V-Box

The Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the interchangeable membranes which have different properties. The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors.
Beiter Centralizers can be ordered with 5/16"-24 inner or outer weight adapters at no extra charge. But the V-box is compatible with almost all available stabilizer systems. On systems using a 5/16 thread, the Beiter V-BOX can be mounted on the standard thread that comes with the stabilizers, while for stabilizers using 1/14 threads, inner and outer thread adaptors to a 5/16"size are available.

. How does the Beiter V-BOX system work?
The various stabilizers on the market have different rigidities. Archers may find rods too stiff, and sometimes also too weak. With a multifunctional and customizable dampening system, such as the Beiter V-BOX, each stabilizer can be adapted to the respective shooters needs. This customization is achieved with the membranes and their different degrees of stiffness, and also through the use of the available weights and spacers. This combination can affect not only the weight distribution, but by their inertia, in combination with the Beiter V-BOX, the entire damping behaviour.

Where should, or can, the weight be attached?
Weights can be attached in front of and behind the Beiter V-BOX. An optimal set up will involve placing weights both sides of the V-BOX. #5 and #7 membranes can support max. 10 oz in front of the V-Box. Attention: the #1 membrane supports max. 5 oz. The weight of the BeiterV-BOX unit is 1.75 oz - 49grams). As an example at a total weight of 16 ounces, the weight could be distributed like this: 2 x 3 oz weights and 1 x 1 oz weight in front of the V-Box and 3x 3 oz weights behind. If you want to shoot a less stabilizer weight, the distribution of the weights can be adjusted by using the spacers. Due to the lever effect, shifting the weights forward on the screw changes weight distribution and dampening, achieving the desired balance with less weight than usual! Thanks to the combination of weights, washers and membranes in 4 different stiffnesses, innumerable different settings and options are possible.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

STABILIZER BEITER

As all Beiter products, the stabilizer was tested by top archers world-wide and used successfully in competitions, winning many titles and medals since its introduction 1996. Four carbon rods, positioned to form a square are held together by plastic blocks (called tuners) made of high quality thermosplasts and elastomers: the result is a new concept of stabilization. Tests have shown that the system is able to absorb more vibration, giving the archer less problems while aiming and performing the shot. The factory setting of the tuners avoids resonance in the system; the tuners themselves can be moved to offer the opportunity of an individual adaptation.
 
Beiter Centralizer Long Rods are available with Endcap in following lengths: 26”, 28”, 30”, 33”, 35”, 37”, 41”, 45”; according to their length these can be ordered with 2, 3, 4 or 5 tuners.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

Target holder for airgun

code	801.0114
description	Target
material	Metallic
Papper target dimensions	14 * 14
qty	1 piece
Availability	YES

The freight is 6,00 € for delivery into the Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

Bohning Hot Melt Cool Flex

• Designed for points & inserts  • Works with aluminum, carbon & wood shafts  • Low temp hot melt adhesive  • Fully cured in cold water & hot water reversible  • Excellent for use when tuning broadheads1 12 gram stick will do approximately 144 inserts.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

 B-STINGER STABILIZER PREMIER PLUS (2016)

DESCRIPTION

The tournament-proven success of the Premier Plus Series is a testament to quality construction. Built with a proprietary high modulus carbon, Premier Plus stabilizers provide extreme rigidity for maximum stabilization. Experience greater down-range accuracy and more consistent overall shooting with the Premier Plus. The choice of World Champions, Premier Plus target stabilizers deliver "match made" performance.

SPECIAL ORDER

Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros