1322

The Model 1322 is a pneumatic pump-action air pistol utilizing .22 (5.5 mm) caliber lead pellets. The pistol's integral pump lever mechanism is located underneath the barrel, integral to the forearm. This pump lever is cycled a variable number of times (up to a maximum of ten strokes) to store increasingly pressurized air in a chamber. When the trigger is activated, an air valve dumps the pressurized air into a transfer port integral to the breech, discharging the pellet from the barrel. According to the manufacturer, a maximum velocity of up to 440 ft/s (130 m/s) was achievable with ten pump strokes, using standard 14.3-grain .22 pellets. The Model 1322 features fully adjustable square notch rear and front fixed blade sights.

H&N Finale match 4.51 mm Pistol pellets  

The top product for competition use. The one Olympic winners and world champions rely on. Maximum possible accuracy with maximum dimensional and weight accuracy. Tightest shot groups, clean-cut bullet holes. Minimum lead fouling and consistent shot spreads thanks to special Match alloy and lubrication. Hand sorted. Head sizes available: 4.48–4.51. Smooth.

A series that matches the firearm can certainly obtain a hole diameter of just 5mm at 10 meters after 10 shot – with a fixed barrel. In order to be able to maintain the “10” reliably with rifles in particular, you should have a test carried out with a fixed barrel at our H&N shooting ranges. Each firearm has a slightly different barrel and pressure build-up. Having the firearm checked by our specialists is definitely worth it!

Model	FINALE MATCH PISTOL 4,51
Τype	match
Cal.	4,5 χιλ. (.177)
Head size	4,51 χιλ.
Weight	0,49
Weight grains	7,56
Qty/box	500
Ideal field of use :	competition use
Recommended type of weapon :	5,5 ft.lbs / 7,5 j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 6 BOXES OF H&N PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE

Gun seeath G7

Very convenient gun  sheath, to make you more visible when shooting. Rubber tip. Belt.

1 wide pocket on side.

Ονομασία μοντέλου	G7
Συσκευασία	1 piece
Είδος κατασκευής	100 %polyester
κωδικός	LVAC 056
Overall length	120 cm

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

BRUNOX Gun Care ® can 300 ml
for hunting-, sporting-, professional and collecting-guns

- cleans, lubricates and attends all metal parts
- displaces humidity and protects reliable against corrosion
- loosens powder-, lead-, tombac-, copper-, nickel- and black powder-
residues
- neutralizes hand sweat

•Excellent penetration properties; it will be formed a very thin, viscous protection film, which does not harden and become resin (contains no silicone, no PTFE, no graphite).

•ehaves neutral against varnish, leather, wood, rubber, plastic and fabric.

•Prevents from leak currents as contact spray.

The additive TUBOLINE increases the gliding quality of all movable parts;
ensures the function of repeat and automatic guns even at temperatures up to -55 °C. BRUNOX® Gun Care loosens grease, organic and mineral dirt. BRUNOX® Gun Care is available as aerosol, which contains only 3% propellant (CO2) or as bulk product. It has a flash point of 78°C.

Physical Properties
BRUNOX® Turbo-Liquide with TURBOLINE –
Appearance	transparent-bluish	Film Thickness	1 – 2 my
Specific Gravity	0,81 ± 0,03 g/cm3	Expect Coverage	approx. 100 – 110 m2/l
Viscosity (20oC)	3,6 mPa s	Lubrication	Bruggertest DIN 51347 22 N/mm2
Flashpoint	78 °C	Consistence of the film	Film non-hardening
Heat Resistance	up to 160 °C short time up to 125 °C permanent	Dielectric Strength	UD: 45 KV eff-ED: 182 KV eff/cm
Freezing Point	-54 °C	Drying Time	evaporation of the solvents within 2-4 h. H depending on weather conditions
pH-Value	neutral	Corrosion Protection	up to 12 months indoor
Film Property	penetrating	Specification	contains no silicon, PTFE, graphite

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

Ram Machine Arrow Spine Tester Carbon

Sort your arrows for perfect consistency of spine (dynamic stiffness).

Precisely index arrow nocks to the stiffest portion of the arrow shaft for the tightest groups.

Check the concentricity of your point to an amazing +/-.0005" for a super accuracy.

Measure the straightness of arrows from the tip to tip.

Monitor the degradation of arrow spine over the course of the season to catch problems before they show up on your score card.

Provide your customers with a valuable service, the ultimate in arrow accuracy.

BEITER NOCKS PIN ASYMMETRIC #2

Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.

The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.

Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.

The freight, for all the deliveries to the Greek area is 6,00 euros 

BEITER STRING SERVER

The freight, for all the deliveries to the Greek area is 6,00 euros 

H&N Spitzkugeln  airgun pellets  

Medium-weight, very accurate pellet for hunting and precision shooting at medium ranges.

Aerodynamic design for flat trajectories and high impact. Ribbed

Model	SPITZKUGELN
Τype	pointed ribbed
Cal.	5,5 mm. (.22)
Head size	.2173" / 5,52 mm.
Footsize [inches]	0.2183" 5.54 mm.
Weight	1,02
Weight grains	15,74
10-Schot Grouping (inches) 10 yds	1,338” / 34 mm.
Ballistic Soap Penetration (inches)	5,315”/ 135 mm.
Ballistic Soap Expansion (inches)	0,315”/ 8 mm
B/C	-
Qty/box	200
Ideal field of use :	field target, paste control
Recommended type of weapon :	≥12 ft.lbs/ 16 j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 6 BOXES OF  PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE