Quest 1000

Take small game, plink or shoot targets with the Quest 1000. This rifle sends .177 pellets screaming out the barrel at 1,000 fps! With only 31.5 lbs. cocking effort, this lightweight, powerful rifle is ideal for hours of serious shooting.
The hardwood stock on this spring-piston breakbarrel rifle has a Monte Carlo buttstock. Details on this rifle make it obvious that Crosman put a lot of thought into the design of this handsome all-round airgun. The fiber optic front and rear (fully adjustable) sights (green front, two-dot red rear) ensure ease in acquiring your targets, even at dusk and dawn. To get the most accuracy from this rifle, mount the included scope on the 11mm dovetails. Don't worry about your mounts sliding off the dovetails; Crosman included a scope stop to support them whenever this powerhouse fires!
The two-stage trigger is adjustable only for take-up (length of the first stage).

CROSMAN QUEST 1000 C1K77
Caliber:	0.177" (4.5mm)	Scopeable:	11mm dovetail
Velocity:	1000 fps	Buttplate:	Rubber
Loudness:	3-Medium	Suggested for:	Small game hunting/target practice
Barrel Length:	18.42	Trigger Pull:	4,00 lbs
Overall Length:	44.5	Action:	Break barrel
Capacity:	1	Safety:	Manual
Cocking Effort:	31,5 lbs.	Power Plant:	Spring-piston
Barrel:	Rifled	Weight:	6.02 lbs
Front Sights:	Fiber Optic	Rear Sights:	Adjustable for windage and elevation

The freight is including in the price for delivery in Greece.
You must be 18 years old to buy an air gun

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

WARNING :Not a toy. This airgun is recommended for adult use only. Misuse or careless use may cause serious injury or death. Read all instructions before using. Buyer and user have the duty to obey all laws about the use and ownership of this airgun. You and others with you should always wear shooting glasses to protect your eyes. BE CAREFUL - SHOOT SAFELY.

ARROWS SHAFT   EASTON A/C/E

·         Lightweight carbon fiber bonded to a precision 7075 alloy core

·         Guaranteed straightness: ± .0015”

·         9-micron polished carbon finish

·         Weight tolerance: ± 0.5 grains

·         Components—sold separately 

Brunox ® IX 100

High - Tec - long – term corrosion inhibitor Sealing

Application and effect
long-term corrosion inhibitor Sealing for
- storage in the open air and (during the winter/summer)
- sea transport
for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.

BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.

BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.

Technische Daten
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
Appearance		olive-brown	Before use	shake well
Specific Gravity		0,886 ± 0,044 g/cm3	Dilutable	Can be diluted with White Spirit or Napar With Dilution the corrosion protection interval will be also reduced.
Viscosity (20oC)	158 mPa s – 1580 mPa s thixotrop
Flashpoint	spray:<0 °C bulk: 41 °C
Heat Resistance		max. 79 °C	Can be used	for all metals
Freezing Point		below -13 °C spray below -41 °C	Drying Time	Not apply on humid surfaces. Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®. HDepending on weather conditions: -dust-dry after approx. 1-2 h, -hardened after approx. 12 h
pH-Value		Neutral
Film Property		Sealing
Film Thickness		25 – 50 my
Expected Coverage		ca. 20 m2/l with 25 my
Lubrication		no	Corrosion Protection	depending on application up to 5 years
Consistence of the film		wax protection film	Specifications	No – silicon, PTFE

TARGET STRIPS IN FOAM

Lightweight

- For making your own targets

For purchases outside Athens before payment by wire transfer to a bank account or by credit card and is shipped via freight forwarding company with a similar charge.