|
BEITER PIN NOCK # 1
|
BEITER NOCKS PIN ASYMMETRIC #1
Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.
Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.
The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.
The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.
Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.
BEITER PIN NOCK
|
Weight
|
4.32 gr
|
Colors
|
Green, Orange, White, black, blue, purple
|
Package
|
1 piece
|
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
|
|
|
|
|
|
BEITER PIN NOCK #2
|
BEITER NOCKS PIN ASYMMETRIC #2
Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.
Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.
The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.
The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.
Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.
BEITER PIN NOCK #2
|
Weight
|
5,247 gr
|
Colors
|
Green, Orange, White, black, blue, purple, clear, orange
|
Package
|
1 piece
|
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros |
|
1,23EUR
|
|
|
|
SERVING MATERIAL FLEX EVO20
|
FLEX EVO20 serving material
Ultra High Modulus Weight Polyethilene Ethylene Serving (UHMWPE) EVO20 ( 3MAX) it´s our latest adition to our serving products line. Made with UHWMPE material is twisted and bonded with a special resin and make the thread round as much as possible for better grip and more slip surface for the release.
- 3 ply UHWMPE material, twisted and bonded.
- .18 diameter.
- For recurve end and center servings.
- For compound bowstrings and cables ends.
- 10 colors at your choice.
- Compatible spools with all hand operate serving-jigs.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
|
|
1,23EUR
|
|
|
|
MARTO SWORD 505 EL CID
|
SWORD Marto 505 El Cid.
The (Rodrigo Díaz de Vivar, 1048 - Valencia, 10 July 1099), known as El Cid Kampeador was Castilian nobleman, soldier and politician. He served as Generalissimo (alférez) the Castilian army under Sancho II of Castile, while exiled by his brother and successor of the latter Alfonso VI. The exile was made triggered the fictionalized life and work demonstrated since then, culminating in the conquest of the rich city of Valencia. Continued military triumphs against Christians and Muslims, and his habit of not reigns under the feudal mores of the time, made him dear to the Spanish people and a model for the knights of his homeland. After the death of his exploits, real and imaginary, as few sung by minstrels, creating a legend around his name. Considered a national hero of Spain.
The title El Cid , which is universally known , is derived from the Spanish article El , and the Arabic word سيد « Cindy " or " Sa'id " (master lord ) . The title Kampeador (Campeador) belongs to the Latin and vernacular can be attributed as "master of martial arts ."
The original sword is now in the Museum of Burgos and metallurgical analysis of the blade that had been made in 1999 , found that he had made in Córdoba and contained quantity and Damascus steel. The copy , which is manufactured by Marto is from forged steel with double-edged , without edge and 24K gold-plated handle . The blade has written over the text in gold letters .
Model
|
EL CID
|
Code
|
505
|
Total length
|
38 ΄΄
|
Blade length
|
31 ΄΄
|
Handle length
|
7 ΄΄
|
Weight
|
2 ,7 lb oz
|
Material
|
Forged Steel 440
|
The freight is including in the price for delivery in Greece.
The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The technical characteristics and dimensions may have some slight variations from sword to sword.
|
|
269,00EUR
|
|
|
|
NOCK POINT MATERIAL FLEX
|
Nock point thread
Specially twisted and bonded for a perfect nocking points and peep. Twisted and bonded material.
- .17 diameter.
- Made nice nock point and secure your peep or string accesories.
- Four bright colors at your choice.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
|
|
269,00EUR
|
|
|
|
BCY Serving Thread Halo
|
BCY Serving Thread Halo
100% tightly braided Spectra suitable for end or center serving. Highest durability. 014" white turns clear when wound tightly.
model
|
BCY Serving Thread Halo
|
Recommended diam.
|
0.14΄΄
|
0.17΄΄
|
0.19΄΄
|
0.21΄΄
|
Approx ft/lb waxed
|
11.500
|
7.000
|
5.750
|
4.900
|
Spool sizes
|
1/4
|
1/4
|
1/4
|
1/4
|
Lemgth / yd
|
120
|
100
|
75
|
75
|
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
|
|
269,00EUR
|
|
|
|
FIBER OPTIC GATHERING SIGHT FOR 3/8 " RIB
|
These metallic ramps can be used to replace many of the plastic ramps on the market. Attaches with one 6-48 screw. High visibility daytime light. Faster sight/target picture. Great in low light situations. CNC machined aluminium. Fit on 3/8” dovetail rib.
For shipments to retail customers within the Greek territory the transport charge is 6,00 €
|
|
25,20EUR
|
|
|
|