Serving Shifter

The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or  the End Serving on the string (e.g. if you want to move the Nocking Point).

 Not only – and much more important! – it allows to „compact“ the serving.

 In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.

Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction… you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!

 The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver… ready to be used!

You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

 The yellow fibre, which helps very low lighting conditions. Adjusted to the position of stochastroy with one of the 3 screws that are included or other, including the key.

For shipments to retail customers within the Greek territory the transport charge is 6,00 €

BRUNOX Gun Care ® can 300 ml
for hunting-, sporting-, professional and collecting-guns

- cleans, lubricates and attends all metal parts
- displaces humidity and protects reliable against corrosion
- loosens powder-, lead-, tombac-, copper-, nickel- and black powder-
residues
- neutralizes hand sweat

•Excellent penetration properties; it will be formed a very thin, viscous protection film, which does not harden and become resin (contains no silicone, no PTFE, no graphite).

•ehaves neutral against varnish, leather, wood, rubber, plastic and fabric.

•Prevents from leak currents as contact spray.

The additive TUBOLINE increases the gliding quality of all movable parts;
ensures the function of repeat and automatic guns even at temperatures up to -55 °C. BRUNOX® Gun Care loosens grease, organic and mineral dirt. BRUNOX® Gun Care is available as aerosol, which contains only 3% propellant (CO2) or as bulk product. It has a flash point of 78°C.

Physical Properties
BRUNOX® Turbo-Liquide with TURBOLINE –
Appearance	transparent-bluish	Film Thickness	1 – 2 my
Specific Gravity	0,81 ± 0,03 g/cm3	Expect Coverage	approx. 100 – 110 m2/l
Viscosity (20oC)	3,6 mPa s	Lubrication	Bruggertest DIN 51347 22 N/mm2
Flashpoint	78 °C	Consistence of the film	Film non-hardening
Heat Resistance	up to 160 °C short time up to 125 °C permanent	Dielectric Strength	UD: 45 KV eff-ED: 182 KV eff/cm
Freezing Point	-54 °C	Drying Time	evaporation of the solvents within 2-4 h. H depending on weather conditions
pH-Value	neutral	Corrosion Protection	up to 12 months indoor
Film Property	penetrating	Specification	contains no silicon, PTFE, graphite

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

AVALON CLASSIC CARBON ARROWS

 Full carbon arrow with straightness tolerance of ± .005"
- Pin with small groove pin nock and EP-23 vanes
- Break-off points
- Both available in full length or cut with glued-in points
Ideal arrow for the starting competition archer

DENIX 1007/L  Colt army mod. 1860

The Colt army mod. 1860 .44 caliber, was constructed in 1860 by the Colt's Manufacturing Company, about 200.00 in parts and was in production until 1873. Designed by Samuel Colt and was used in the Civil War and the war with the Indians. It was a side weapon used by the cavalry, infantry and naval forces. They used the same frame as the Colt Navy 1851, were .36 caliber but open their chamber at .44. Was 6-bullets, single action and used rotating cylinder 0.454'' (11chil.). Entered the cylinder 30 grains of black powder and the copper percussion cap contained mercury to cause the explosion. The rear sight was a notch in the hammer, clearly visible only when the revolver was cocked  The accurate was 70-90 meters and muzzle velosity was  900 feet per second.

Model	COLT Army model 1860
Code	1007/L
Weight	1.120 gr.
Dimension	37 cm
Color	Black and old brass
Handle	Wood
Date of manufactoring	1860
AVAILABILITY	YES

The freight is including to the price  for delivery inτο  Greece.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

 UNIVERSAL VENT RIB “SLUGGER” SHOTGUN FIRE SIGHT SET

One size fits all. Front and rear metallic sights attach to virtually all vent ribs. Adjustable for windage and elevation. No gunsmithing required

For shipments to retail customers within the Greek territory no charge transport

 These metallic ramps can be used to replace many of the plastic ramps on the market. Attaches with one 6-48 screw. High visibility daytime light. Faster sight/target picture. Great in low light situations. CNC machined aluminium. Fit on 3/8” dovetail rib.

For shipments to retail customers within the Greek territory the transport charge is 6,00 €