HUNTER 301 ARM GUARD

Brunox ® IX 100

High - Tec - long – term corrosion inhibitor Sealing

Application and effect
long-term corrosion inhibitor Sealing for
- storage in the open air and (during the winter/summer)
- sea transport
for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.

BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.

BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.

Technische Daten
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
Appearance		olive-brown	Before use	shake well
Specific Gravity		0,886 ± 0,044 g/cm3	Dilutable	Can be diluted with White Spirit or Napar With Dilution the corrosion protection interval will be also reduced.
Viscosity (20oC)	158 mPa s – 1580 mPa s thixotrop
Flashpoint	spray:<0 °C bulk: 41 °C
Heat Resistance		max. 79 °C	Can be used	for all metals
Freezing Point		below -13 °C spray below -41 °C	Drying Time	Not apply on humid surfaces. Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®. HDepending on weather conditions: -dust-dry after approx. 1-2 h, -hardened after approx. 12 h
pH-Value		Neutral
Film Property		Sealing
Film Thickness		25 – 50 my
Expected Coverage		ca. 20 m2/l with 25 my
Lubrication		no	Corrosion Protection	depending on application up to 5 years
Consistence of the film		wax protection film	Specifications	No – silicon, PTFE

 C 40

It is as heavy as the real 1911 military hand gun. It is 99% metal except for the trigger and the hammer. The hammer is fully functional like in a real gun. It feels like you are holding a real gun! It is very powerful. It gets about 480 FPS with round BB's and 430fps with Pellets. It's an overall nice gun/replica. It's not the most accurate gun out there but the realistic look of it really makes up for that. It's very hard to tell it is an air gun, even the barrel is the size of a real bullet and the smaller barrel is hidden within it. It can shoot 8 shots off as fast as you can pull the trigger. Makes a nice sound, it is powered with c02. It is alot of fun and definitely the most realistic pistol I have found!

CROSMAN C 40 N
Caliber:	0.177" (4.5mm)	Scopeable:	-
Velocity:	430-475  fps	Grip:	Synthetic
Loudness:	Low	Suggested for:	Target practice
Barrel Length:	4.24”	Trigger Pull:	-
Overall Length:	8.6”	Action:	Double action
Capacity:	8	Safety:	Manual
Cocking Effort:	-.	Power Plant:	CO 2
Barrel:	Rifled 6/400	Weight:	2,5 lbs
Front Sights:	Fixed blade	Rear Sights:	Adjustable for windage and elevation
Energy ft.lbs	2.44	Joules	3.3
Guaranty	1 year	Service-spare parts	Yes

FOR MANUALHERE     FOR SPARE PARTS DRAW HERE

The freight is inclunding in the price for delivery in Greece.
You must be 18 years old to buy an airgun

The above item is already in stock in our shop.
Address :  61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

WARNING :Not a toy. This airgun is recommended for adult use only. Misuse or careless use may cause serious injury or death. Read all instructions before using. Buyer and user have the duty to obey all laws about the use and ownership of this airgun. You and others with you should always wear shooting glasses to protect your eyes. BE CAREFUL - SHOOT SAFELY.