|
|
BRUNOX TURBO SPRAY 400ml
|
|
Brunox® turbo-spray® 400ml
5 function - spray with Turboline
Application
for
• maintenance •cleaning • repair works
• production • storage • transportation
of machines, precision tools, semi-finished and finished products, vehicles, plants and electrical instruments of all kinds
BRUNOX® Turbo-Spray®, the only multi-function-spray with the additive TUROBLINE which guarantees a high capillary effect and the best coverage (100 – 120 m2/l).
BRUNOX® Turbo-Spray® is sprayed on to metal surfaces, displaces water and provides protection against humidity and aggressive environmental influences such as acid atmospheres, chimney gas-steams etc.. By applying BRUNOX® Turbo-Spray® an invisible, compact 1 – 2 my thick non-hardening anti-corrosive film is formed, providing reliable protection.
BRUNOX® Turbo-Spray® can be removed without difficulty with cleaning materials (tensides).
Application and effect
Lubricant
BRUNOX® Turbo-Spray® is a long-term lubricant based on a balanced mixture of hydrocarbons with the additive TURBOLINE.
Creep oil / Rust loosener
BRUNOX® Turbo-Spray® is a multi-component lubricant which has an excellent penetration effect. Therefore it is capable of penetrating into finest hair-chaps and spaces and, for example, loosens tightened screws in a very short time. It loosens rust and frees sticky mechanisms.
Anti-corrosion
BRUNOX® Turbo-Spray® guarantees complete corrosion protection and also conservation of hollow spaces. The hydrocarbon mixture which is responsible for this guarantees both a compact protection film and also the necessary film thickness which displaces any humidity. It forms a clear, invisible, non-hardening film which does not need to be removed in most cases. (Exception: painting). This film provides temporary protection against corrosion (approx. 6 months) and has a dirt repelling effect.
Cleaning agent
BRUNOX® Turbo-Spray® penetrates and removes mineral and organic dirt so that spots of (almost) all kinds (e.g. tar, brake dust, adhesive residues etc.) can be easily wiped off. It neutralizes hand sweat and also protects aluminum, copper, brass, chromium plated and galvanized sheet metal and stainless steel.
Contact spray
BRUNOX® Turbo-Spray® has a very low surface tension and a corresponding adhesion to metals so that leak currents will be prevented and humidity which has penetrated will immediately be displaced. It is suitable for the corrosion protection of electrical contacts in low-voltage engineering. Before spraying on electrical or electronic equipment, switch off the devices. The very high dielectric strength (UD=45KV/cm) also allows the application in connection with very sensitive (high-impedance) circuits. This property is particularly useful with electrical contacts and short circuits can be eliminated and prevented.
properties
BRUNOX® Turbo-Spray® contains • no silicone, • no PTFE • no graphite
BRUNOX® Turbo-Spray® behaves neutral against • varnish, leather, wood, rubber, plastic and fabric
BRUNOX® Turbo-Spray® contains • just 3% propellant (CO2), i.e. 97% active substance
BRUNOX® Turbo-Spray® has • a flash point of 78oC
|
Physical Properties
|
|
BRUNOX® Turbo-Spray – 5- function-spray with TURBOLINE –
|
|
Appearance
|
transparent-bluish
|
Film Thickness
|
1 – 2 my
|
|
Specific Gravity
|
0,82 ± 0,02 g/cm3
|
Expect Coverage
|
approx. 100 – 120 m2/l
|
|
Viscosity (20oC)
|
3 mPa s
|
Lubrication
|
Bruggertest DIN 51347
23 N/mm2
|
|
Flashpoint
|
78 °C
|
Consistence of the film
|
Film non-hardening
|
|
Heat Resistance
|
up to 160 °C short time
up to 125 °C permanent
|
Dielectric Strength
|
UD: 45 KV eff-ED: 182 KV eff/cm
|
|
Freezing Point
|
-51 °C
|
Drying Time
|
evaporation of the solvents within 2-4 h. H depending on weather conditions
|
|
pH-Value
|
neutral
|
Corrosion Protection
|
up to 12 months indoor
|
|
Film Property
|
penetrating
|
Specification
|
contains no silicon, PTFE, graphite
|
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
|
8,07EUR
|
|
|
|
|
ARROWS FLETCHER BITZENBURGER
|
|
BITZENBURGER FLETCHER
Bitzenburger jigs have set the industry standard for fletching tools for over 50 years. It is today’s only true precision fletching instrument used by every major manufacturer of quality arrows around the world. Unparalleled quality along with simplicity, design and precision sets this fletching tool in a class by itself. Designed by experienced archers for the perfectionist who wants the finest fletcher in the world for perfect arrow making.
|
CARTEL FLETCHER
|
|
Material
|
Metal
|
|
Dimensions
|
cm.
|
|
Weight
|
gr.
|
|
Color
|
Silver
|
|
Type
|
Straight
|
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros |
|
|
8,07EUR
|
|
|
|
|
INDOOR LIGHTS FOR SHOOTING CHRONY CHRONOGRAPHS
|
|
INDOOR SHOOTING LIGHT FIXTURE
If you own a Chrony, you need these lights are the days where you might not be out to chronografisete your arms. The lights are placed on the sunshade so that it can measure velocities indoors. You must use them in a room that has not fluorescent lighting. The light from the lamps is sufficient for the operation of skyscreens by themselves, and no other lights required.
|
Model
|
INDOOR SHOOTING LIGHT FIXTURE
|
|
Length of cable
|
183 cm
|
|
Weight
|
400 gr
|
|
Voltage
|
220
|
The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
|
61,50EUR
|
|
|
|
|
SHOOTING CHRONY BALLISTIC PRINTER
|
|
SHOOTING CHRONY PRINTER
Prints on plain paper, comes with 16 ft. interface cable and runs on 120V_AC Adapter, Output_6VDC (included) or 4-AA Batteries (not included). Can be placed anywhere on the Shooting Bench because it connects to the Chrony with a Cable (without needing light port alignments).
The SHOOTING CHRONY BALLISTIC PRINTER works with all Shooting Chrony Models and all Master Chrony Models, manufactured and sold since January 1, 2000, and, starting with Serial # 157288.
The following Chrony Models manufactured and sold prior to that date and Serial number also work with the CHRONY PRINTER: The Alpha, Beta and Gamma Shooting Chronys and the respective Master Chrony Models. Prints velocities as you shoot, and/or afterwards, when retrieving from memory. When done, push button, and Printer gives statistics, such as: LO, HI and Average velocity, Extreme Spread and Standard Deviation. Attach to target or file. It is a document. Printer also functions as a Remote Control . Weight: 1 lbs.; 4" x 7.5" x 1.75" high.
|
Model
|
CHRONY PRINTER
|
|
Dimensions (closd) (l x w x h)
|
4” x 7,5’’ x 1,75’’
|
|
Weight
|
1 lbs
|
|
Alkaline Battery
|
6 Volt (4 AAA) or transformer
|
FOR MANUAL PRESS HERE
The freight is including in the price for delivery in Greece.
The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
|
115,03EUR
|
|
|
|
|
KALIBRGUN AIRGUN CRICKET WST .22
|
|
Air rifle KALIBRGUN CRICKET WST .22
The small but miraculous rifle Kalibrgun, Cricket WST 5,5, total length 68 cm, operating at 300 bar and has regulator. Delivers 40 Joules / 30 ft lbs, has a rubber pad, rail weaver, manometer and 2 cylinders with 14 shots.
|
KALIBRGUN CRICKET ST WST .22
|
|
|
Caliber:
|
0.22" (5.5mm)
|
Scopeable:
|
Weaver
|
|
Velocity:
|
793 fps/ 21,14 grains
|
Buttplate:
|
Rubber
|
|
Loudness:
|
-
|
Suggested for:
|
Target practice/Paste control
|
|
Barrel Length:
|
17,72 “ LW
|
Trigger Pull:
|
-
|
|
Overall Length:
|
26,77 ”
|
Action:
|
Side lever
|
|
Capacity:
|
14
|
Safety:
|
Manual
|
|
Max.Shots Per Fill
|
60
|
Power Plant:
|
PCP 300 bar
|
|
Barrel:
|
Rifled 12groovs
|
Weight:
|
5.95 lbs
|
|
Front Sights:
|
-
|
Rear Sights:
|
-
|
|
Energy ft.lbs
|
30
|
Joules
|
40
|
|
Guaranty
|
1 year
|
Service-spare parts
|
Yes
|
The freight is including in the price for delivery in Greece.
You must be 18 years old to buy an air gun
The above item will be in stock in our shop.after the 21th/01/2013
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
WARNING :Not a toy. This airgun is recommended for adult use only. Misuse or careless use may cause serious injury or death. Read all instructions before using. Buyer and user have the duty to obey all laws about the use and ownership of this airgun. You and others with you should always wear shooting glasses to protect your eyes. BE CAREFUL - SHOOT SAFELY.
|
|
|
1.612,00EUR
|
|
|
|
|
BRUNOX TURBO SPRAY
|
|
Brunox® turbo-spray® 100ml
5 function - spray with Turboline
Application
for
• maintenance •cleaning • repair works
• production • storage • transportation
of machines, precision tools, semi-finished and finished products, vehicles, plants and electrical instruments of all kinds
BRUNOX® Turbo-Spray®, the only multi-function-spray with the additive TUROBLINE which guarantees a high capillary effect and the best coverage (100 – 120 m2/l).
BRUNOX® Turbo-Spray® is sprayed on to metal surfaces, displaces water and provides protection against humidity and aggressive environmental influences such as acid atmospheres, chimney gas-steams etc.. By applying BRUNOX® Turbo-Spray® an invisible, compact 1 – 2 my thick non-hardening anti-corrosive film is formed, providing reliable protection.
BRUNOX® Turbo-Spray® can be removed without difficulty with cleaning materials (tensides).
Application and effect
Lubricant
BRUNOX® Turbo-Spray® is a long-term lubricant based on a balanced mixture of hydrocarbons with the additive TURBOLINE.
Creep oil / Rust loosener
BRUNOX® Turbo-Spray® is a multi-component lubricant which has an excellent penetration effect. Therefore it is capable of penetrating into finest hair-chaps and spaces and, for example, loosens tightened screws in a very short time. It loosens rust and frees sticky mechanisms.
Anti-corrosion
BRUNOX® Turbo-Spray® guarantees complete corrosion protection and also conservation of hollow spaces. The hydrocarbon mixture which is responsible for this guarantees both a compact protection film and also the necessary film thickness which displaces any humidity. It forms a clear, invisible, non-hardening film which does not need to be removed in most cases. (Exception: painting). This film provides temporary protection against corrosion (approx. 6 months) and has a dirt repelling effect.
Cleaning agent
BRUNOX® Turbo-Spray® penetrates and removes mineral and organic dirt so that spots of (almost) all kinds (e.g. tar, brake dust, adhesive residues etc.) can be easily wiped off. It neutralizes hand sweat and also protects aluminum, copper, brass, chromium plated and galvanized sheet metal and stainless steel.
Contact spray
BRUNOX® Turbo-Spray® has a very low surface tension and a corresponding adhesion to metals so that leak currents will be prevented and humidity which has penetrated will immediately be displaced. It is suitable for the corrosion protection of electrical contacts in low-voltage engineering. Before spraying on electrical or electronic equipment, switch off the devices. The very high dielectric strength (UD=45KV/cm) also allows the application in connection with very sensitive (high-impedance) circuits. This property is particularly useful with electrical contacts and short circuits can be eliminated and prevented.
properties
BRUNOX® Turbo-Spray® contains • no silicone, • no PTFE • no graphite
BRUNOX® Turbo-Spray® behaves neutral against • varnish, leather, wood, rubber, plastic and fabric
BRUNOX® Turbo-Spray® contains • just 3% propellant (CO2), i.e. 97% active substance
BRUNOX® Turbo-Spray® has • a flash point of 78oC
|
Physical Properties
|
|
BRUNOX® Turbo-Spray – 5- function-spray with TURBOLINE –
|
|
Appearance
|
transparent-bluish
|
Film Thickness
|
1 – 2 my
|
|
Specific Gravity
|
0,82 ± 0,02 g/cm3
|
Expect Coverage
|
approx. 100 – 120 m2/l
|
|
Viscosity (20oC)
|
3 mPa s
|
Lubrication
|
Bruggertest DIN 51347
23 N/mm2
|
|
Flashpoint
|
78 °C
|
Consistence of the film
|
Film non-hardening
|
|
Heat Resistance
|
up to 160 °C short time
up to 125 °C permanent
|
Dielectric Strength
|
UD: 45 KV eff-ED: 182 KV eff/cm
|
|
Freezing Point
|
-51 °C
|
Drying Time
|
evaporation of the solvents within 2-4 h. H depending on weather conditions
|
|
pH-Value
|
neutral
|
Corrosion Protection
|
up to 12 months indoor
|
|
Film Property
|
penetrating
|
Specification
|
contains no silicon, PTFE, graphite
|
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
|
3,53EUR
|
|
|
