H&N Baracuda  Match airgun pellets 

Heavy, extremely accurate pellet for long ranges. First-class aerodynamic design for high impact and penetration. Tightest shot groups. Lowest rate of lead fouling and consistent shot spreads thanks to special alloy. Specially chosen. Head sizes available: 4.50–4.52.& 5,51-5,53. Smooth.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 50,00 € OF  PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6,00 € FOR DELIVERY INTO GREECE 

Brunox ® IX 50

High – Tec – long-term corrosion inhibitor
Application and effect
• high-quality lubricant
• long-term corrosion inhibitor for - storage and transportation  for drive gear, chains, cables, slides, machines, precision tools, semi-finished and finished products, vehicles, plants and all kinds of equipment.

BRUNOX® IX 50 is a non-hardening High-Tec-two-function-product, which can be used wherever long-lasting lubrication and reliable corrosion protection is required.
It forms a very compact, non-hardening anti-corrosive film, which also provides complete cover into corners and edges.

BRUNOX® IX 50 also lubricates under enormous surface pressure.

BRUNOX® IX 50 can be removed with cleaning materials (tensides) when protection is no longer required.

Physical Properties
BRUNOX® IX 50 – High – Tech – long – term corrosion inhibitor -
Appearance		olive-yellow	Expect Coverage	approx. 40 m2/l with 5 my
Specific Gravity		0,838 ± 0,02 g/cm3
Viscosity (20oC)		25 mPa s – 120 mPa s thixotrop	Lubrication	Bruggertest/DIN 51347 48 N/mm2
Flashpoint		Aerosol:<0 °C Bulk: 51 °C	Consistence of the film	film non-hardening
Heat Resistance		up to 150 °C short time up to 100 °C permanent	Before use	shake well
			Can be used	for all metals
Freezing Point		below -41°C	Drying Time	evaporation of the solvents within 2-4 h Hdepending on weather conditions
pH-Value		neutral	Corrosion Protection	Indoor: up to 3 years Outdoor: up to ½ year Covered outdoor : up to 1 year If you like a longer protection, control the film and renew it, if necessary
Film Property	penetrating
Film Thickness	5 – 20 my		Specifications	No -silicon -resins, -PTFE - acids

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

Brunox ® IX 100

High - Tec - long – term corrosion inhibitor Sealing

Application and effect
long-term corrosion inhibitor Sealing for
- storage in the open air and (during the winter/summer)
- sea transport
for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.

BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.

BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.

Technische Daten
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
Appearance		olive-brown	Before use	shake well
Specific Gravity		0,886 ± 0,044 g/cm3	Dilutable	Can be diluted with White Spirit or Napar With Dilution the corrosion protection interval will be also reduced.
Viscosity (20oC)	158 mPa s – 1580 mPa s thixotrop
Flashpoint	spray:<0 °C bulk: 41 °C
Heat Resistance		max. 79 °C	Can be used	for all metals
Freezing Point		below -13 °C spray below -41 °C	Drying Time	Not apply on humid surfaces. Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®. HDepending on weather conditions: -dust-dry after approx. 1-2 h, -hardened after approx. 12 h
pH-Value		Neutral
Film Property		Sealing
Film Thickness		25 – 50 my
Expected Coverage		ca. 20 m2/l with 25 my
Lubrication		no	Corrosion Protection	depending on application up to 5 years
Consistence of the film		wax protection film	Specifications	No – silicon, PTFE

H&N Field Target Trophy airgun pellets. 

Medium-weight, extremely accurate competition pellet with flat trajectory for medium ranges. Exceptional aerodynamic design for high impact and penetration. Tightest shot groups. Lowest rate of lead fouling and consistent shot spreads thanks to special alloy. Head sizes available:4.50-4.51-4.52-5.00-5.53–5.54-5.55 and 6.35 mm Smooth..

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 50,00 € OF  PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6,00 € FOR DELIVERY INTO GREECE

MP - 41

The MP-41 (M.P. 41) submachine gun (9x19 Luger/Parabellum) was developed by Hugo Schmeisser, son of the Louis Schmeisser who developed the first practical machine gun, the MP-18.At the time of development of MP-41, that is, in 1941, the company C.G.Haenel,at which Schmeisser was chiefdesigner, manufactured MP-40 submachine guns for German army. It is possible that Schmeisser decided to develop a submachine gun which was better suited for infantry use than the MP-40.For this reason, he combined the receiver, action and magazine of MP-40 with the wooden stock and selective-fire mechanism of MP-28.Haenel company produced more than few MP-41 submachine guns, which were mostly purchased by SS troops, which had their own supply chains. However, late in 1941 Erma company filed a patent infringement lawsuit against Haenel, and as a result, Haenel company was forced to close the production of MP-41. Only 26 700 guns of MP-41 pattern were made during the war, and most were issued to SS, SDand police troops.

Code	1024
Weight	3.150 gr.
Dimension	86 cm
Color	Black metal  with wooden stock
Date of manufactoring	1941

The freight is including in the price for delivery in Greece.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros