|
BRUNOX LUBRI FOOD 100 ml
|
BRUNOX LUBRI FOOD ® 100 ML
brunox® lubri-Food®
High – Tec – Allrounder for the food industry
Product description
Lubricant, protection, creep oil and cleaning agent appropriate for occasional technically unavoidable contact to food, is NSF H1 registered (N° 136783 and N°137856).
Mode of working
A high-tech-product that does not become resinous and is produced from NSF H1 registered ingredients. It forms a homogeneous and very efficient lubricating film which displaces humidity and protects against corrosion. BRUNOX® Lubri-Food® has an excellent penetration that guarantees an excellent loosening effect, it can also be used for the removal of boiler scale and makes tightened parts movable.
Application area
All aspects of the food industry, from maintenance of production line equipment and food packaging machinery as well for agriculture, restaurant and hotel business. Can also be used by manufactures of food industry tools and equipment and machinery.
Object
To reduce friction and wear and therefore increases the life span of expensive food production equipment.
Application
Warning please ensure, that the electricity supply is disconnected before applying BRUNOX® Lubri-Food®.
Apply a light, even film and allow BRUNOX® Lubri-Food® to react.
Only apply as much BRUNOX® Lubri-Food® as it is absolutely necessary to obtain the desired technical result.
Wipe off excess with cloth.
BRUNOX® Lubri-Food® should contact food as little as possible despite its official NSF H1 registration.
Physical Properties
|
BRUNOX® Lubri-Food® – High-Tec-Allrounder for the food industry –
|
Appearance
|
Transparent
|
Film Thickness
|
3 – 4 my
|
Specific Gravity
|
0,83 ± 0,02 g/cm3
|
Expect Coverage
|
approx. 100 – 120 m2/l
|
Viscosity (20oC)
|
85 mPa s
|
Lubrication
|
Bruggertest/DIN 51347
25 N/mm2
|
Flashpoint
|
73 °C
|
Consistence of the film
|
film does non-hardening
|
Heat Resistance
|
up to 155 °C short time
up to 125 °C permanent
|
Protection
|
-displaces humidity
-stops limestone
|
Freezing Point
|
below -20 °C
|
Can be used
|
for all metals
|
pH-Value
|
neutral
|
Specifications
|
- NSF H1 registered
N° 136783 and N° 137856
- drinking water certificate
- froth certificate
- Kosher certificate
- contains no: silicon, PTFE,
resins, acids
|
Film Property
|
penetrating
|
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
7,56EUR
|
|
|
|
ARMGUARD CARTEL CR-6
|
CARTEL ARM GUARD CR-6
· Comfortable design.
· Offers excellent protection from string burn and impact.
· Ventilated design.
· Adjustable elastic attachment.
.The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
|
|
2,00EUR
|
|
|
|
ΒRUΝΟΧ® GUN CARE SPREY 100 ML
|
BRUNOX Gun Care ® can 100 ml
for hunting-, sporting-, professional and collecting-guns
- cleans, lubricates and attends all metal parts
- displaces humidity and protects reliable against corrosion
- loosens powder-, lead-, tombac-, copper-, nickel- and black powder-
residues
- neutralizes hand sweat
•Excellent penetration properties; it will be formed a very thin, viscous protection film, which does not harden and become resin (contains no silicone, no PTFE, no graphite).
•ehaves neutral against varnish, leather, wood, rubber, plastic and fabric.
•Prevents from leak currents as contact spray.
The additive TUBOLINE increases the gliding quality of all movable parts;
ensures the function of repeat and automatic guns even at temperatures up to -55 °C. BRUNOX® Gun Care loosens grease, organic and mineral dirt. BRUNOX® Gun Care is available as aerosol, which contains only 3% propellant (CO2) or as bulk product. It has a flash point of 78°C.
Physical Properties
|
BRUNOX® Turbo-Liquide with TURBOLINE –
|
Appearance
|
transparent-bluish
|
Film Thickness
|
1 – 2 my
|
Specific Gravity
|
0,81 ± 0,03 g/cm3
|
Expect Coverage
|
approx. 100 – 110 m2/l
|
Viscosity (20oC)
|
3,6 mPa s
|
Lubrication
|
Bruggertest DIN 51347
22 N/mm2
|
Flashpoint
|
78 °C
|
Consistence of the film
|
Film non-hardening
|
Heat Resistance
|
up to 160 °C short time
up to 125 °C permanent
|
Dielectric Strength
|
UD: 45 KV eff-ED: 182 KV eff/cm
|
Freezing Point
|
-54 °C
|
Drying Time
|
evaporation of the solvents within 2-4 h. H depending on weather conditions
|
pH-Value
|
neutral
|
Corrosion Protection
|
up to 12 months indoor
|
Film Property
|
penetrating
|
Specification
|
contains no silicon, PTFE, graphite
|
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
4,44EUR
|
|
|
|
BRUNOX TURBO SPRAY 400ml
|
Brunox® turbo-spray® 400ml
5 function - spray with Turboline
Application
for
• maintenance •cleaning • repair works
• production • storage • transportation
of machines, precision tools, semi-finished and finished products, vehicles, plants and electrical instruments of all kinds
BRUNOX® Turbo-Spray®, the only multi-function-spray with the additive TUROBLINE which guarantees a high capillary effect and the best coverage (100 – 120 m2/l).
BRUNOX® Turbo-Spray® is sprayed on to metal surfaces, displaces water and provides protection against humidity and aggressive environmental influences such as acid atmospheres, chimney gas-steams etc.. By applying BRUNOX® Turbo-Spray® an invisible, compact 1 – 2 my thick non-hardening anti-corrosive film is formed, providing reliable protection.
BRUNOX® Turbo-Spray® can be removed without difficulty with cleaning materials (tensides).
Application and effect
Lubricant
BRUNOX® Turbo-Spray® is a long-term lubricant based on a balanced mixture of hydrocarbons with the additive TURBOLINE.
Creep oil / Rust loosener
BRUNOX® Turbo-Spray® is a multi-component lubricant which has an excellent penetration effect. Therefore it is capable of penetrating into finest hair-chaps and spaces and, for example, loosens tightened screws in a very short time. It loosens rust and frees sticky mechanisms.
Anti-corrosion
BRUNOX® Turbo-Spray® guarantees complete corrosion protection and also conservation of hollow spaces. The hydrocarbon mixture which is responsible for this guarantees both a compact protection film and also the necessary film thickness which displaces any humidity. It forms a clear, invisible, non-hardening film which does not need to be removed in most cases. (Exception: painting). This film provides temporary protection against corrosion (approx. 6 months) and has a dirt repelling effect.
Cleaning agent
BRUNOX® Turbo-Spray® penetrates and removes mineral and organic dirt so that spots of (almost) all kinds (e.g. tar, brake dust, adhesive residues etc.) can be easily wiped off. It neutralizes hand sweat and also protects aluminum, copper, brass, chromium plated and galvanized sheet metal and stainless steel.
Contact spray
BRUNOX® Turbo-Spray® has a very low surface tension and a corresponding adhesion to metals so that leak currents will be prevented and humidity which has penetrated will immediately be displaced. It is suitable for the corrosion protection of electrical contacts in low-voltage engineering. Before spraying on electrical or electronic equipment, switch off the devices. The very high dielectric strength (UD=45KV/cm) also allows the application in connection with very sensitive (high-impedance) circuits. This property is particularly useful with electrical contacts and short circuits can be eliminated and prevented.
properties
BRUNOX® Turbo-Spray® contains • no silicone, • no PTFE • no graphite
BRUNOX® Turbo-Spray® behaves neutral against • varnish, leather, wood, rubber, plastic and fabric
BRUNOX® Turbo-Spray® contains • just 3% propellant (CO2), i.e. 97% active substance
BRUNOX® Turbo-Spray® has • a flash point of 78oC
Physical Properties
|
BRUNOX® Turbo-Spray – 5- function-spray with TURBOLINE –
|
Appearance
|
transparent-bluish
|
Film Thickness
|
1 – 2 my
|
Specific Gravity
|
0,82 ± 0,02 g/cm3
|
Expect Coverage
|
approx. 100 – 120 m2/l
|
Viscosity (20oC)
|
3 mPa s
|
Lubrication
|
Bruggertest DIN 51347
23 N/mm2
|
Flashpoint
|
78 °C
|
Consistence of the film
|
Film non-hardening
|
Heat Resistance
|
up to 160 °C short time
up to 125 °C permanent
|
Dielectric Strength
|
UD: 45 KV eff-ED: 182 KV eff/cm
|
Freezing Point
|
-51 °C
|
Drying Time
|
evaporation of the solvents within 2-4 h. H depending on weather conditions
|
pH-Value
|
neutral
|
Corrosion Protection
|
up to 12 months indoor
|
Film Property
|
penetrating
|
Specification
|
contains no silicon, PTFE, graphite
|
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
8,07EUR
|
|
|
|
SHOOT OFF GLASSES CLASSIC
|
Shoot-off Classic
The Shoot-off Classic is only sold by 4 lenses kit + additionnal lenses.
Available Shoot-off Classic lenses : N° 1-3-4-5-6-7-13-14-15-17.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight is 6,00€, for all the deliveries into the Greek area. |
|
8,07EUR
|
|
|
|
RISER HOYT FORMULA Xi 2020
|
HOYT HANDLE FORMULA Xi 2020
Formula fitting recurve riser from Hoyt.
The most dynamic and responsive feeling riser from Hoyt to date.
Key features:
- Riser design keeps flexing minimumal for increased accuracy and stability.
- Micro-adjustable dovetail adjustment block and tiller bolts to find your tuning sweet spot.
- Dynamic balance with more of the weight towards the pocket side of the riser for improved accuracy and consistency.
- Unique feel and performance.
- Featuring the classic Earl Hoyt geometry - a favourite for over 30 years..
- Formula fitting limbs for a super stable and smooth shooting platform.
- Modular stainless steel weight system (available separately) allows for extra weight to be added to the riser, giving the feel and stability you want. Fits cleanly into riser cut-outs for a seamless look. See related items below.
- VertaTune clicker plate allowing for tuneable pressure button height and a secure pressure button position.
- Available in a full range of Hoyt's anodized target colours.
String Tension Technology settings: There are three distinct settings you can choose from. With the limb rockers in position number one, referred to as the Ultimate Performance Setting, you will achieve the highest level of string tension, which is optimal for those looking for a more aggressive pull through the clicker in high pressure, high adrenaline situations. On the opposite adjustment spectrum, position number three, referred to as the Ultimate Smoothness Setting, the string tension is the lowest. This helps the limbs feel smoother through the clicker, especially during the last 1 to 2 millimeters of the draw cycle. Position number 2 is considered a hybrid setting, for those looking for a combination of performance and smoothness.
HOYT HANDLE FORMULA Xi 2020
|
Material
|
Aluminium
|
Size
|
25”
|
Weight
|
1.252 gram.
|
Handle
|
RH or LH
|
Finish
|
Anodized
|
Colors
|
|
|
|
8,07EUR
|
|
|
|
SHOOTING CHRONY LED LAMP 220V/12V
|
LED SHOOTING LIGHT FIXTURE
With this new Chrony LED Lamp (C.L.L.) all Shooting Chrony Chronograph Models will work under any light condition and give consistent velocities: Indoors, Outdoors, even on overcast days, or in the shade. The Chrony LED Lamp is assembled to 14”
Diffusers, ready-to-use and comes with a set of 16” Wire-Rods. 120V/220VAC adapter included (12VDC output @500mA).
Model
|
LED SHOOTING LIGHT FIXTURE
|
Length of cable
|
183 cm
|
Weight
|
400 gr
|
Voltage
|
220/12 vdc
|
The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
117,04EUR
|
|
|
|
POUCH AVALON TEC X
|
POUCH AVALON TEC - X
-Release or Finger Tab Pouch
-Color: Blue
-Durable Diamond Fabric
-Ultra Soft Fleece lining
- Quick draw closure
-Inner divider separator
-Webbed loop to easily attach to a belt
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros |
|
117,04EUR
|
|
|