Rose City Cedars shafts – 5/16”  , 32"

Highest quality shafts from Rose City. Hand selected for best grain structure. These spine matched shafts come in a full 32" length in 2 different diameters, in a large range of sizes. Port Orford Cedar has been the prefered wood type for decades by traditional archers of all levels. It is unmatched by any other wood shaft because of its strength, straight grain, elasticity and perfect physical weight to spine ratio.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

Τhe freight is 6.00 euro for deliveries into the Greek area. 

Sight 5D series

Available for most of the more popular rifles and shotguns – the inexpensive, quality-made 5D sight. These sights are patterned after the Foolproof. They have the same strength, lightweight, and neat appearance, but without the micrometer adjustments. Designed for rugged hunting use, the 5D sights are dependable and accurate. Positive locks. Clear unobstructed vision. No knobs or side plates to blot out shooter’s field of vision. The material used in the manufacture of the Williams 5D sight is one of the highest grade alloys obtainable. There has been no sacrifice of quality as we are using one of the most expensive, highest tensile strength alloys that money can buy. Laboratory tests show that the material used has a tensile strength approximately 25% greater than mild steels. This high-grade alloy is finished with an anodize in a deep blue-black that adds even further to the strength of the sight by creating an extra hard surface. (Low line of sight)

 Sight 5D series

Available for most of the more popular rifles and shotguns – the inexpensive, quality-made 5D sight. These sights are patterned after the Foolproof. They have the same strength, lightweight, and neat appearance, but without the micrometer adjustments. Designed for rugged hunting use, the 5D sights are dependable and accurate. Positive locks. Clear unobstructed vision. No knobs or side plates to blot out shooter’s field of vision. The material used in the manufacture of the Williams 5D sight is one of the highest grade alloys obtainable. There has been no sacrifice of quality as we are using one of the most expensive, highest tensile strength alloys that money can buy. Laboratory tests show that the material used has a tensile strength approximately 25% greater than mild steels. This high-grade alloy is finished with an anodize in a deep blue-black that adds even further to the strength of the sight by creating an extra hard surface. (Low line of sight)

 Micrometer adjustable sights FP series

Internal micrometer adjustments have positive internal locks.  The FP is strong, rugged, dependable.  The alloy used to manufacture this sight has a tensile strength of 85,000 pounds.  Yet, the FP is light and compact, weighing only 1-1/2 ounces.  For grooved receivers on Airguns and .22 rifles (High line of sight)

H&N Finale match 4.48 mm pellets  

The top product for competition use. The one Olympic winners and world champions rely on. Maximum possible accuracy with maximum dimensional and weight accuracy. Tightest shot groups, clean-cut bullet holes. Minimum lead fouling and consistent shot spreads thanks to special Match alloy and lubrication. Hand sorted. Head sizes available: 4.48–4.51. Smooth.

A series that matches the firearm can certainly obtain a hole diameter of just 5mm at 10 meters after 10 shot – with a fixed barrel. In order to be able to maintain the “10” reliably with rifles in particular, you should have a test carried out with a fixed barrel at our H&N shooting ranges. Each firearm has a slightly different barrel and pressure build-up. Having the firearm checked by our specialists is definitely worth it!

Model	FINALE MATCH RIFLE 4,48
Τype	match
Cal.	4,5 χιλ. (.177)
Head size	4,49 χιλ.
Weight	0,53
Weight grains	8,18
Qty/box	500
Ideal field of use :	competition use
Recommended type of weapon :	5,5 ft.lbs / 7,5 j

Specifications* Test Rifle: Walther LG300 (7,5 J); distance 10m

Cal. .177 (4,5mm)	Muzzle	10m	30m
Velocity (m/s)	175	-	-
Kinetic Energy (J)	7,5	-	-
Ballistic Soap Penetration (mm)	-	-	-
Ballistic Soap Expansion (mm)	-	-	-
10-Shot Grouping (mm)	-	5,0	-
Pellet Weight (g)	0,53	-	-
Headsize (mm)	4,48	-	-
Footsize (mm) 4,75	4,75	-	-
B/C	0,010	-	-

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 6 BOXES OF H&N PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE

 Dovetail Style Sight Set

Fully adjustable rear metallic Fire Sight fits all standard 3/8” dovetails on most Marlin and Winchester models. Front Fire Sight steel bead replaces existing factory bead. Light-gathering fiber optics for most lever action rifles with RAMPED front sights. No gunsmithing required.