Distance Holder

The Beiter Distance Holder is a tool to separate string and cable of a Compound Bow, to allow or simplify specific works to be done, such as re-serving a string or cable or to fix a nocking point or peep sight...

 The biggest advantages toward similar products are, that on one hand it is smaller and on the other hand the cable guard is not an obstacle, but is eventually part of the use.

The Beiter Distance Holder can be used in different ways:

 inserted in the cable-guard, if you have to serve in the area of the cable-guard itself.

 with 2 or 3 installed DH-Plugs, Plugs for Distance Holder, you can use the Beiter Distance Holder directly between string and cables: the plugs will than be a sort of rolls to better slide on the cables!!

with 4 installed DH-Plugs, 2 per each side, for shoot-through cable systems.

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

Bohning Hot Melt Cool Flex

• Designed for points & inserts  • Works with aluminum, carbon & wood shafts  • Low temp hot melt adhesive  • Fully cured in cold water & hot water reversible  • Excellent for use when tuning broadheads1 12 gram stick will do approximately 144 inserts.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

 test icop