|
ACCUBOW BAND
|
ACCUBOW BAND
Replacement band for AccuBow training aid.
Key features:
· Easy to replace and install.
· Durable and flexible.
· Allows for poundage adjustment from 10-70lbs.
· Replacement recommended every 4-6 months with regular use.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros |
|
14,00EUR
|
|
|
|
H & N BARACUDA PELLETS 4.5 MM
|
H&N Baracuda airgun pellets
Heavy, very accurate pellet for long ranges. First-class, aerodynamic design for high impact and penetration. Tight shot groups. Lowest rate of lead fouling and consistent shot spreads thanks to special alloy and lubrication Smooth.
Model
|
BARACUDA
|
Τype
|
domed
|
Cal.
|
4,5 χιλ. (.177)
|
Head size
|
4,50 mm.
|
Weight
|
0,69
|
Weight grains
|
10,65
|
Qty/box
|
500
|
Ideal field of use :
|
field target, paste control
|
Recommended type of weapon :
|
12-37 ft.lbs/ 16 - 50 j
|
BC
|
0.024
|
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425 |
|
9,48EUR
|
|
|
|
ARROW SHAFT EASTON A/C/E
|
ARROWS SHAFT EASTON A/C/E
· Lightweight carbon fiber bonded to a precision 7075 alloy core
· Guaranteed straightness: ± .0015”
· 9-micron polished carbon finish
· Weight tolerance: ± 0.5 grains
· Components—sold separately |
|
9,48EUR
|
|
|
|
ARROWS AVALON TEC X 8.0 CARBON
|
ARROWS AVALON TEC X 8.0 CARBON
- Spine: 300,350,400 & 500
- ID: 4,2mm
- OD: 9.0 mm
- Weight: 6.6gpi, 7.4gpi, 7.9gpi & 8.5gpi
- Straightness Toler.: .001"
- Length: 33"
- Point: 140/160/180gr Break Off Point or Fatboy Points(uninstalled point)
- Nock: Internal large groove or pin nock
- Vanes: EP-40
|
|
|
|
SIZE
|
SHAFT WEIGHT
Grains/inch
|
OUTSIDE
DIAM.
|
SPINE
|
TOTAL
LENGTH
|
WEIGHT OF
POINTS
grains
|
NOCK
|
500
|
6,6
|
9,00
|
|
33
|
|
160-180
|
INTERNAL LARGE GROVE OR PIN NOCK
|
400
|
7,4
|
350
|
7,9
|
300
|
8,5
|
|
|
|
|
|
|
|
|
|
|
|
|
6,00EUR
|
|
|
|
|
String-Tool, Pair #1 (9,5mm) (12,7mm-1/2")
|
Serving Shifter
The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or the End Serving on the string (e.g. if you want to move the Nocking Point).
Not only – and much more important! – it allows to „compact“ the serving.
In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.
Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction
you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!
The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver
ready to be used!
You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
|
|
8,24EUR
|
|
|
|
|
H&N SAMPLER FIELD TARGETS TROPHY AIRGUN PELLETS 4,50-4.51-4.52
|
H&N FIELD TARGET SAMPLER airgun pellets
A kit consists of 40 missiles in each head size, Baracuda Match and Field Target Trophy in head size s 4,50 - 4.51 to 4.52 mm is suitable to find most of the problems best suited to your gun. About the projectiles can be found on the site, the individual presentations..
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425 |
|
9,48EUR
|
|
|