ACCUBOW BAND

Replacement band for AccuBow training aid.

Key features:

·         Easy to replace and install.

·         Durable and flexible.

·         Allows for poundage adjustment from 10-70lbs.

·         Replacement recommended every 4-6 months with regular use.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

H&N Baracuda  airgun pellets  

Heavy, very accurate pellet for long ranges. First-class, aerodynamic design for high impact and penetration. Tight shot groups. Lowest rate of lead fouling and consistent shot spreads thanks to special alloy and lubrication Smooth.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32

Tel. 0030 210 5225 007 - 0030 210 5234 425 

ARROWS SHAFT   EASTON A/C/E

·         Lightweight carbon fiber bonded to a precision 7075 alloy core

·         Guaranteed straightness: ± .0015”

·         9-micron polished carbon finish

·         Weight tolerance: ± 0.5 grains

·         Components—sold separately 

ARROWS AVALON TEC X 8.0 CARBON

- Spine: 300,350,400 & 500

- ID: 4,2mm

- OD: 9.0 mm

- Weight: 6.6gpi, 7.4gpi, 7.9gpi & 8.5gpi

- Straightness Toler.: .001"

- Length: 33"

- Point: 140/160/180gr Break Off Point or Fatboy Points(uninstalled point)

- Nock: Internal large groove or pin nock

- Vanes: EP-40

Serving Shifter

The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or  the End Serving on the string (e.g. if you want to move the Nocking Point).

 Not only – and much more important! – it allows to „compact“ the serving.

 In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.

Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction… you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!

 The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver… ready to be used!

You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

H&N FIELD TARGET SAMPLER  airgun pellets  

A kit consists of 40 missiles in each head size, Baracuda Match and Field Target Trophy in head size s 4,50 - 4.51 to 4.52 mm is suitable to find most of the problems best suited to your gun. About the projectiles can be found on the site, the individual presentations..

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425