Cleaning kit ..45 cal PISTOL

Rifle cleaning kit with plastic coated steel cleaning rod

CLEANING KIT .45 cal PISTOL
Overall length	27 cm
Handle	Anatomical from wood
Brushes	Wool, bristle & steel spiral

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

JVD NETTING WHITE STANDARD

• The height of the netting is 3.20m.
• The netting is available in fixed dimensions as shown below (no increments possible).
• The netting is supplied with steel cable and rings.
• The Standard netting weighs +/- 300 gr./m2 (compared to +/- 500 gr./m2 of the Extra Strong netting and +/- 1,000 gr./m2 of the Ultra Strong one).

Upon request, with 20% prepayment

Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

For purchases outside Athens before payment by wire transfer to a bank account or by credit card and is shipped via freight forwarding company with a similar charge. 

Avalon Tec One Target Quiver with Belt

Weight: 694 gr.

- Length: 46cm

- Direction: RH or LH

- Molded rubber arrow separator to prevent 'arrow wearing'

- 4 pockets

- Slot for pen & T-gauge

- 2 D-loop rings to hook your accessories

- Deluxe belt included

- Clip for accessories

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

SHOOTING  CHRONY PRINTER

Prints on plain paper, comes with 16 ft. interface cable and runs on 120V_AC Adapter, Output_6VDC (included) or 4-AA Batteries (not included). Can be placed anywhere on the Shooting Bench because it connects to the Chrony with a Cable (without needing light port alignments).

The SHOOTING CHRONY BALLISTIC PRINTER works with all Shooting Chrony Models and all Master Chrony Models, manufactured and sold since January 1, 2000, and, starting with Serial # 157288.

The following Chrony Models manufactured and sold prior to that date and Serial number also work with the CHRONY PRINTER: The Alpha, Beta and Gamma Shooting Chronys and the respective Master Chrony Models. Prints velocities as you shoot, and/or afterwards, when retrieving from memory. When done, push button, and Printer gives statistics, such as: LO, HI and Average velocity, Extreme Spread and Standard Deviation. Attach to target or file. It is a document. Printer also functions as a Remote Control . Weight: 1 lbs.; 4" x 7.5" x 1.75" high. 

Model	CHRONY PRINTER
Dimensions (closd) (l x w x h)	4” x 7,5’’ x 1,75’’
Weight	1 lbs
Alkaline Battery	6 Volt  (4 AAA) or transformer

FOR MANUAL PRESS HERE

The freight is including in the price for delivery in Greece.

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

1322

The Model 1322 is a pneumatic pump-action air pistol utilizing .22 (5.5 mm) caliber lead pellets. The pistol's integral pump lever mechanism is located underneath the barrel, integral to the forearm. This pump lever is cycled a variable number of times (up to a maximum of ten strokes) to store increasingly pressurized air in a chamber. When the trigger is activated, an air valve dumps the pressurized air into a transfer port integral to the breech, discharging the pellet from the barrel. According to the manufacturer, a maximum velocity of up to 440 ft/s (130 m/s) was achievable with ten pump strokes, using standard 14.3-grain .22 pellets. The Model 1322 features fully adjustable square notch rear and front fixed blade sights.