BEITER PIN OUT NOCK X-10 145/1

Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.

Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.

The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.

The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.

The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.

Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.

The freight, for all the deliveries to the Greek area is 6,00 euros 

Neue Spitkugeln

Medium-weight, very accurate pellet for medium ranges. Unique design. Flat trajectory and good penetration. Excellent for knock-down targets.

Model	NEUE SPITZKUGELN
Τype	pointed smooth
Cal.	5,5 mm. (.22)
Head size	5,50 mm.
Footsize [inches]	-
Weight	1,03
Weight grains	15,90
10-Schot Grouping (inches) 10 yds	-
Ballistic Soap Penetration (inches)	-
B/C
Qty/box	200
Ideal field of use :	field target, paste control
Recommended type of weapon :	5,5-12 ft.lbs/ 7,5-16 j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 6 BOXES OF  PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE

H&N Baracuda 5.50

Heavy, extremely accurate pellet for long ranges. First-class aerodynamic design for high impact and penetration. Tightest shot groups. Lowest rate of lead fouling and consistent shot spreads thanks to special alloy and lubrication. Specially chosen

Model	BARACUDA 5,50
Τype	domed
Cal.	5,50 χιλ. (0,22)΄΄
Head size	0.2169" / 5,51 χιλ.
Footsize [inches]	0.2276" / 5,78 χιλ.
Weight	1,37
Weight grains	21,14
10-Schot Grouping (inches) 25/50 yds 33 ft.lbs airgun	0.59" / 14,99 χιλ. – 1,496’’/38 χιλ
Ballistic Soap Penetration (inches) 33 ft.lbs airgun	9.252 " / 235 χιλ
Ballistic Soap Expantion (inches) 33 ft.lbs airgun	0,393’’ / 998 χιλ.
B/C	0,033
Qty/box	200
Ideal field of use :	field target, paste control
Recommended type of weapon :	≥18,5  ft.lbs/ 25 j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

C11 / P10 / T11 Spare Clips

More clips means more shooting! Load up on BBs with these extra clips for your C11, P10 and T11 Air Pistols. Two per pack.

code	0481
description	Set of 2 magazines for C11 – C21 – C31 – P10 – T11
capacity	18 shot
material	metallic
qty	1 set
Availability	YES

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

Brunox ® IX 50

High – Tec – long-term corrosion inhibitor
Application and effect
• high-quality lubricant
• long-term corrosion inhibitor for - storage and transportation  for drive gear, chains, cables, slides, machines, precision tools, semi-finished and finished products, vehicles, plants and all kinds of equipment.

BRUNOX® IX 50 is a non-hardening High-Tec-two-function-product, which can be used wherever long-lasting lubrication and reliable corrosion protection is required.
It forms a very compact, non-hardening anti-corrosive film, which also provides complete cover into corners and edges.

BRUNOX® IX 50 also lubricates under enormous surface pressure.

BRUNOX® IX 50 can be removed with cleaning materials (tensides) when protection is no longer required.

Physical Properties
BRUNOX® IX 50 – High – Tech – long – term corrosion inhibitor -
Appearance		olive-yellow	Expect Coverage	approx. 40 m2/l with 5 my
Specific Gravity		0,838 ± 0,02 g/cm3
Viscosity (20oC)		25 mPa s – 120 mPa s thixotrop	Lubrication	Bruggertest/DIN 51347 48 N/mm2
Flashpoint		Aerosol:<0 °C Bulk: 51 °C	Consistence of the film	film non-hardening
Heat Resistance		up to 150 °C short time up to 100 °C permanent	Before use	shake well
			Can be used	for all metals
Freezing Point		below -41°C	Drying Time	evaporation of the solvents within 2-4 h Hdepending on weather conditions
pH-Value		neutral	Corrosion Protection	Indoor: up to 3 years Outdoor: up to ½ year Covered outdoor : up to 1 year If you like a longer protection, control the film and renew it, if necessary
Film Property	penetrating
Film Thickness	5 – 20 my		Specifications	No -silicon -resins, -PTFE - acids

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

 Gompy Bowstringer Tip-Tip Standard BSP-2