|
POINTS EASTON A/C/E BREAK OFF
|
POINTS FOR EASTON CARBON ONE
Internal points for EASTON arrows CARBON ONE, with possibility of adjusting the length of the shaft and the weight
Internal arrowhead for CARBON ONE
|
TYPE
|
60-70-80 gr
|
80-90-100 gr
|
100-110-120 gr
|
length in mm
|
-
|
53,60
|
60,53
|
length of nose in mm
|
-
|
16
|
22,17
|
weight
|
60-80 gr
|
80-100 gr
|
100-120 gr
|
thickness axis
|
4,20 mm
|
Weight per axle
|
10 grains
|
colors
|
SS
|
package
|
12 pieces
|
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros |
|
30,00EUR
|
|
|
|
Ram Machine Arrow Spine Tester Carbon
|
Ram Machine Arrow Spine Tester Carbon
Sort your arrows for perfect consistency of spine (dynamic stiffness).
Precisely index arrow nocks to the stiffest portion of the arrow shaft for the tightest groups.
Check the concentricity of your point to an amazing +/-.0005" for a super accuracy.
Measure the straightness of arrows from the tip to tip.
Monitor the degradation of arrow spine over the course of the season to catch problems before they show up on your score card.
Provide your customers with a valuable service, the ultimate in arrow accuracy.
|
|
345,00EUR
|
|
|
|
CROSMAN AIRGUN MTR 77 NP
|
MTR 77 NP -177 Rifle (.177)
Folding rifle, copy of the US Army's gun, rifled steel barrel, adjustable sights, with a synthetic stock and carrying handle. Works with nitrogen piston
CROSMAN MTR 77 NP Rifle (.177)
|
Caliber:
|
0.177" (4.5mm)
|
Scopeable:
|
picatinny
|
Velocity:
|
1000-1200 fps
|
Buttplate:
|
Plastic
|
Loudness:
|
94,5 db
|
Suggested for:
|
Target practice
|
Barrel Length:
|
15΄΄
|
Trigger Pull:
|
45 lbs
|
Overall Length:
|
40 ΄΄
|
Action:
|
Break barrel
|
Capacity:
|
1
|
Safety:
|
Manual
|
Cocking Effort:
|
45 lbs
|
Power Plant:
|
Nitro piston
|
Barrel:
|
Rifled
|
Weight:
|
6,1 lbs
|
Front Sights:
|
Adjustable for windage and elevation
|
Rear Sights:
|
Adjustable for windage and elevation
|
Guaranty
|
1 year
|
Service-spare parts
|
Yes
|
The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
WARNING :Not a toy. This airgun is recommended for adult use only. Misuse or careless use may cause serious injury or death. Read all instructions before using. Buyer and user have the duty to obey all laws about the use and ownership of this airgun. You and others with you should always wear shooting glasses to protect your eyes. BE CAREFUL - SHOOT SAFELY.
|
|
292,36EUR
|
|
|
|
SHRASAYA MARTO 201
|
MARTO SHRASAYA 201
The sirasagia were swords battle but when a blade should be stored for long, then the ADAPT a wooden handle and sheath made of natural wood nurizaya to be able to preserve moisture and time.
Handmade katana by Marto, in Toledo Spain steel type AISI 420. It made the process of forging and heat. The blade does not rust and does not need further care. The casing is made of wood with Japanese symbols on the handle and the tray ...
Model
|
SHRASAYA 201
|
Code
|
201
|
Total length
|
27,36 ΄΄
|
Blade length
|
17.96 ΄΄
|
Handle length
|
6,30΄΄
|
Weight
|
1,57 lb
|
Material
|
Forged Steel AISI 420
|
The freight is including in the price for delivery in Greece.
The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The technical characteristics and dimensions may have some slight variations from sword to sword.
|
|
144,16EUR
|
|
|
|
ΒRUΝΟΧ® ΙΧ 50 SPREY 400 ML
|
Brunox ® IX 50
High – Tec – long-term corrosion inhibitor
Application and effect
• high-quality lubricant
• long-term corrosion inhibitor for - storage and transportation for drive gear, chains, cables, slides, machines, precision tools, semi-finished and finished products, vehicles, plants and all kinds of equipment.
BRUNOX® IX 50 is a non-hardening High-Tec-two-function-product, which can be used wherever long-lasting lubrication and reliable corrosion protection is required.
It forms a very compact, non-hardening anti-corrosive film, which also provides complete cover into corners and edges.
BRUNOX® IX 50 also lubricates under enormous surface pressure.
BRUNOX® IX 50 can be removed with cleaning materials (tensides) when protection is no longer required.
Physical Properties
|
BRUNOX® IX 50 – High – Tech – long – term corrosion inhibitor -
|
Appearance
|
olive-yellow
|
Expect
Coverage
|
approx. 40 m2/l
with 5 my
|
Specific Gravity
|
0,838 ± 0,02 g/cm3
|
Viscosity (20oC)
|
25 mPa s – 120 mPa s
thixotrop
|
Lubrication
|
Bruggertest/DIN 51347
48 N/mm2
|
Flashpoint
|
Aerosol:<0 °C
Bulk: 51 °C
|
Consistence of the film
|
film non-hardening
|
Heat Resistance
|
up to 150 °C short time
up to 100 °C permanent
|
Before use
|
shake well
|
Can be used
|
for all metals
|
Freezing Point
|
below -41°C
|
Drying Time
|
evaporation of the solvents within 2-4 h
Hdepending on weather conditions
|
pH-Value
|
neutral
|
Corrosion
Protection
|
Indoor: up to 3 years
Outdoor: up to ½ year
Covered outdoor : up to 1 year
If you like a longer protection, control the film and renew it, if necessary
|
Film Property
|
penetrating
|
Film Thickness
|
5 – 20 my
|
Specifications
|
No
-silicon
-resins,
-PTFE
- acids
|
|
|
|
|
|
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
7,56EUR
|
|
|
|
String-Tool, Pair #1 (9,5mm) (12,7mm-1/2")
|
Serving Shifter
The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or the End Serving on the string (e.g. if you want to move the Nocking Point).
Not only – and much more important! – it allows to „compact“ the serving.
In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.
Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction
you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!
The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver
ready to be used!
You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
|
|
8,24EUR
|
|
|
|
CASE FOR T/D BOWS AVALON TYRO
|
AVALON TYRO Case Recurve
ECONOMIC CASES IN INJECTED POLYPROPYLENE
AVALON TYRO Case Recurve
|
Dimensions
|
outside
|
inside
|
Length
|
86 cm.
|
85 cm.
|
Width
|
34 cm.
|
30 cm.
|
Depth
|
13 cm.
|
12 cm.
|
Weight
|
2,800 kg
|
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 15,00 euros |
|
35,00EUR
|
|
|
|
P 022 CROSMAN PELLETS
|
Model |
P 022 |
Retail price |
5,20 4,50 euro
|
Τype |
pointed |
Cal. |
5,5 χιλ. (.22) |
Head size |
5,50 χιλ. |
Weight |
0,93 |
Weight grains |
14,30 |
Qty/box |
175 / tin |
Ideal field of use : |
plinking, paste control |
Recommended type of weapon : |
12-37 ft.lbs/ 16-50 j |
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425 For orders > 75 euro we include the freight in the prices, for all the deliverys to the Greek area. |
|
4,94EUR
|
|
|