Flip target .150

The goal FLIP TARGET moved after every shot around the shaft, increasing the distance from the shooter and creates more difficulty pointing. Suitable for all fields. It is a great shooting experience and enable the company to entertain for many hours. It is made from an innovative material, high strength POLEX ®

Model	FLIP TARGET .150
Material	POLEX®
Construction	Synthetic and metal
Availability	YES

The freight is 6,00 € for delivery into the Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

 JVD NETTING GREEN ULTRA STRONG

The JVD Netting Ultra Strong is the strongest netting on the market. This netting is not intended to be shot at directly, but serves as extra protection behind archery targets. Although that it is ultra strong netting, it might not stop all arrows. This depends on the bow and arrow used and the distance to the target / netting.*

Specifications:

·         The height of the Ultra Strong netting is 1.80m (in comparison: the Standard and Extra Strong netting have a height between 2.85 - 3.20m).

·         The lengths vary from 3m, 4m, to 5m & 25m special order

·         The Ultra Strong netting stops more arrows than the Extra Strong netting, because of the denser structure (higher density).

·         The Ultra Strong netting weighs +/- 1,000 gr./m2 (compared to +/- 500 gr./m2 of the Extra Strong netting and +/- 300 gr./m2 of the Standard one).

·         The netting is supplied with steel cable and rings.

Upon request, with 20% prepayment

Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

For purchases outside Athens before payment by wire transfer to a bank account or by credit card and is shipped via freight forwarding company with a similar charge.

 Beiter V-Box

The Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the interchangeable membranes which have different properties. The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors.
Beiter Centralizers can be ordered with 5/16"-24 inner or outer weight adapters at no extra charge. But the V-box is compatible with almost all available stabilizer systems. On systems using a 5/16 thread, the Beiter V-BOX can be mounted on the standard thread that comes with the stabilizers, while for stabilizers using 1/14 threads, inner and outer thread adaptors to a 5/16"size are available.

. How does the Beiter V-BOX system work?
The various stabilizers on the market have different rigidities. Archers may find rods too stiff, and sometimes also too weak. With a multifunctional and customizable dampening system, such as the Beiter V-BOX, each stabilizer can be adapted to the respective shooters needs. This customization is achieved with the membranes and their different degrees of stiffness, and also through the use of the available weights and spacers. This combination can affect not only the weight distribution, but by their inertia, in combination with the Beiter V-BOX, the entire damping behaviour.

Where should, or can, the weight be attached?
Weights can be attached in front of and behind the Beiter V-BOX. An optimal set up will involve placing weights both sides of the V-BOX. #5 and #7 membranes can support max. 10 oz in front of the V-Box. Attention: the #1 membrane supports max. 5 oz. The weight of the BeiterV-BOX unit is 1.75 oz - 49grams). As an example at a total weight of 16 ounces, the weight could be distributed like this: 2 x 3 oz weights and 1 x 1 oz weight in front of the V-Box and 3x 3 oz weights behind. If you want to shoot a less stabilizer weight, the distribution of the weights can be adjusted by using the spacers. Due to the lever effect, shifting the weights forward on the screw changes weight distribution and dampening, achieving the desired balance with less weight than usual! Thanks to the combination of weights, washers and membranes in 4 different stiffnesses, innumerable different settings and options are possible.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

SECURA HUNTING 7 χιλ. 50/60

Arrows of carbon suitable for hunters

model	TARGET 3D 7mm. 50/60
spine	50/60
weight	17,6 gram.
length	77 cm
wings	Arizona  4,2”
nock	external
nose	Screw in adaptor
diameter	7 mm.

If you buy more than 10 items, the freight is free for deliveries into the Greek area.

Target holder for airgun

code	801.017
description	Target
material	Metallic
Papper target dimensions	17 * 17
qty	1 piece
Availability	YES

The freight is 6,00 € for delivery into the Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

H&N TIN CLIP

Keeps all H&N tins of Finale Match, Match and Sport diabolos closed safely after

the adhesive tape has been removed. Ideal for secure transport and storage

of open tins.

CARTEL ARM GUARD CR-6

·         Comfortable design.

·         Offers excellent protection from string burn and impact.

·         Ventilated design.

·         Adjustable elastic attachment.

 .The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros