HOYT LIMBS ILF/GP CARBON VELOS 2019
Grand Prix fitting recurve limbs from Hoyt.
Key features:
HOYT LIMBS ilf CARBON VELOS 2019
Material
Bamboo / Carbon
Size
66 – 68 – 70 ”
Power
22 – 50 lbs/ 2 lbs
Colors
Carbon
Beiter V-Box
The Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the interchangeable membranes which have different properties. The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors. Beiter Centralizers can be ordered with 5/16"-24 inner or outer weight adapters at no extra charge. But the V-box is compatible with almost all available stabilizer systems. On systems using a 5/16 thread, the Beiter V-BOX can be mounted on the standard thread that comes with the stabilizers, while for stabilizers using 1/14 threads, inner and outer thread adaptors to a 5/16"size are available.
. How does the Beiter V-BOX system work? The various stabilizers on the market have different rigidities. Archers may find rods too stiff, and sometimes also too weak. With a multifunctional and customizable dampening system, such as the Beiter V-BOX, each stabilizer can be adapted to the respective shooters needs. This customization is achieved with the membranes and their different degrees of stiffness, and also through the use of the available weights and spacers. This combination can affect not only the weight distribution, but by their inertia, in combination with the Beiter V-BOX, the entire damping behaviour.
Where should, or can, the weight be attached? Weights can be attached in front of and behind the Beiter V-BOX. An optimal set up will involve placing weights both sides of the V-BOX. #5 and #7 membranes can support max. 10 oz in front of the V-Box. Attention: the #1 membrane supports max. 5 oz. The weight of the BeiterV-BOX unit is 1.75 oz - 49grams). As an example at a total weight of 16 ounces, the weight could be distributed like this: 2 x 3 oz weights and 1 x 1 oz weight in front of the V-Box and 3x 3 oz weights behind. If you want to shoot a less stabilizer weight, the distribution of the weights can be adjusted by using the spacers. Due to the lever effect, shifting the weights forward on the screw changes weight distribution and dampening, achieving the desired balance with less weight than usual! Thanks to the combination of weights, washers and membranes in 4 different stiffnesses, innumerable different settings and options are possible.
Damper Beiter V BOX
elastic
Dimensions
1,38 ΄΄ (5/16-24)
Weight
49 gr.
Color
Βlack
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
HOYT HANDLE FORMULA Xi 2020
Formula fitting recurve riser from Hoyt.
The most dynamic and responsive feeling riser from Hoyt to date.
String Tension Technology settings: There are three distinct settings you can choose from. With the limb rockers in position number one, referred to as the Ultimate Performance Setting, you will achieve the highest level of string tension, which is optimal for those looking for a more aggressive pull through the clicker in high pressure, high adrenaline situations. On the opposite adjustment spectrum, position number three, referred to as the Ultimate Smoothness Setting, the string tension is the lowest. This helps the limbs feel smoother through the clicker, especially during the last 1 to 2 millimeters of the draw cycle. Position number 2 is considered a hybrid setting, for those looking for a combination of performance and smoothness.
Aluminium
25”
1.252 gram.
Handle
RH or LH
Finish
Anodized
Brunox® turbo-spray® 400ml
5 function - spray with Turboline
Application for • maintenance •cleaning • repair works • production • storage • transportation of machines, precision tools, semi-finished and finished products, vehicles, plants and electrical instruments of all kinds
BRUNOX® Turbo-Spray®, the only multi-function-spray with the additive TUROBLINE which guarantees a high capillary effect and the best coverage (100 – 120 m2/l). BRUNOX® Turbo-Spray® is sprayed on to metal surfaces, displaces water and provides protection against humidity and aggressive environmental influences such as acid atmospheres, chimney gas-steams etc.. By applying BRUNOX® Turbo-Spray® an invisible, compact 1 – 2 my thick non-hardening anti-corrosive film is formed, providing reliable protection. BRUNOX® Turbo-Spray® can be removed without difficulty with cleaning materials (tensides).
Application and effect
Lubricant
BRUNOX® Turbo-Spray® is a long-term lubricant based on a balanced mixture of hydrocarbons with the additive TURBOLINE.
Creep oil / Rust loosener
BRUNOX® Turbo-Spray® is a multi-component lubricant which has an excellent penetration effect. Therefore it is capable of penetrating into finest hair-chaps and spaces and, for example, loosens tightened screws in a very short time. It loosens rust and frees sticky mechanisms.
Anti-corrosion
BRUNOX® Turbo-Spray® guarantees complete corrosion protection and also conservation of hollow spaces. The hydrocarbon mixture which is responsible for this guarantees both a compact protection film and also the necessary film thickness which displaces any humidity. It forms a clear, invisible, non-hardening film which does not need to be removed in most cases. (Exception: painting). This film provides temporary protection against corrosion (approx. 6 months) and has a dirt repelling effect.
Cleaning agent
BRUNOX® Turbo-Spray® penetrates and removes mineral and organic dirt so that spots of (almost) all kinds (e.g. tar, brake dust, adhesive residues etc.) can be easily wiped off. It neutralizes hand sweat and also protects aluminum, copper, brass, chromium plated and galvanized sheet metal and stainless steel.
Contact spray
BRUNOX® Turbo-Spray® has a very low surface tension and a corresponding adhesion to metals so that leak currents will be prevented and humidity which has penetrated will immediately be displaced. It is suitable for the corrosion protection of electrical contacts in low-voltage engineering. Before spraying on electrical or electronic equipment, switch off the devices. The very high dielectric strength (UD=45KV/cm) also allows the application in connection with very sensitive (high-impedance) circuits. This property is particularly useful with electrical contacts and short circuits can be eliminated and prevented.
properties
BRUNOX® Turbo-Spray® contains • no silicone, • no PTFE • no graphite BRUNOX® Turbo-Spray® behaves neutral against • varnish, leather, wood, rubber, plastic and fabric BRUNOX® Turbo-Spray® contains • just 3% propellant (CO2), i.e. 97% active substance BRUNOX® Turbo-Spray® has • a flash point of 78oC
Physical Properties
BRUNOX® Turbo-Spray – 5- function-spray with TURBOLINE –
Appearance
transparent-bluish
Film Thickness
1 – 2 my
Specific Gravity
0,82 ± 0,02 g/cm3
Expect Coverage
approx. 100 – 120 m2/l
Viscosity (20oC)
3 mPa s
Lubrication
Bruggertest DIN 51347 23 N/mm2
Flashpoint
78 °C
Consistence of the film
Film non-hardening
Heat Resistance
up to 160 °C short time up to 125 °C permanent
Dielectric Strength
UD: 45 KV eff-ED: 182 KV eff/cm
Freezing Point
-51 °C
Drying Time
evaporation of the solvents within 2-4 h. H depending on weather conditions
pH-Value
neutral
Corrosion Protection
up to 12 months indoor
Film Property
penetrating
Specification
contains no silicon, PTFE, graphite
The freight is 6,00 € for delivery into the Greece area.
Eickhorn KM2000 Double sided Tanto blade made of Boehler N695 steel (HRC 57) with black Kalgard coating and half serrated cutting edge. Fiberglas enforced synthetic cross guard. Black synthetic sheath with lanyard, fits all U.S. – M.O.L.L.E. and German IDZ carrying systems. Comes with diamond sharpener. Overall length 30.2 cm. Blade length 17,2 cm. Blade thickness 5 mm. Total weight 330 g
LINDER EICKHORN KM 2000 825101 Code 825101 Length of blade 4.8 “. Blade Boehler N695 Blade thickness 5 mm Hardness 57 HRC Total length 11.90 “ Length of handle 5.10 “. Weight 330 gram. Handle Fiberglas Sheath Synthetic (including)
LINDER EICKHORN KM 2000 825101
Code
825101
Length of blade
4.8 “.
Blade
Boehler N695
Blade thickness
5 mm
Hardness
57 HRC
Total length
11.90 “
Length of handle
5.10 “.
330 gram.
Fiberglas
Sheath
Synthetic (including)
The freight is including in the price for delivery in Greece.
PUMA TEC 7311244
PUMA TEC 7311442
7311442
21 1/2 “.
AISI 420
4,00 mm
21 125 “
5 “.
863 gram.
Synthetic
Naylon (including)
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425