Quest 1000
Take small game, plink or shoot targets with the Quest 1000. This rifle sends .177 pellets screaming out the barrel at 1,000 fps! With only 31.5 lbs. cocking effort, this lightweight, powerful rifle is ideal for hours of serious shooting. The hardwood stock on this spring-piston breakbarrel rifle has a Monte Carlo buttstock. Details on this rifle make it obvious that Crosman put a lot of thought into the design of this handsome all-round airgun. The fiber optic front and rear (fully adjustable) sights (green front, two-dot red rear) ensure ease in acquiring your targets, even at dusk and dawn. To get the most accuracy from this rifle, mount the included scope on the 11mm dovetails. Don't worry about your mounts sliding off the dovetails; Crosman included a scope stop to support them whenever this powerhouse fires! The two-stage trigger is adjustable only for take-up (length of the first stage).
CROSMAN QUEST 1000 C1K77
Caliber:
0.177" (4.5mm)
Scopeable:
11mm dovetail
Velocity:
1000 fps
Buttplate:
Rubber
Loudness:
3-Medium
Suggested for:
Small game hunting/target practice
Barrel Length:
18.42
Trigger Pull:
4,00 lbs
Overall Length:
44.5
Action:
Break barrel
Capacity:
1
Safety:
Manual
Cocking Effort:
31,5 lbs.
Power Plant:
Spring-piston
Barrel:
Rifled
Weight:
6.02 lbs
Front Sights:
Fiber Optic
Rear Sights:
Adjustable for windage and elevation
The freight is including in the price for delivery in Greece. You must be 18 years old to buy an air gun
The above item is already in stock in our shop. Address: 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
WARNING :Not a toy. This airgun is recommended for adult use only. Misuse or careless use may cause serious injury or death. Read all instructions before using. Buyer and user have the duty to obey all laws about the use and ownership of this airgun. You and others with you should always wear shooting glasses to protect your eyes. BE CAREFUL - SHOOT SAFELY.
ARROWS SHAFT EASTON A/C/E
· Lightweight carbon fiber bonded to a precision 7075 alloy core
· Guaranteed straightness: ± .0015”
· 9-micron polished carbon finish
· Weight tolerance: ± 0.5 grains
· Components—sold separately
Brunox ® IX 100
High - Tec - long – term corrosion inhibitor Sealing
Application and effect long-term corrosion inhibitor Sealing for - storage in the open air and (during the winter/summer) - sea transport for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.
BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.
BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.
Technische Daten
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
Appearance
olive-brown
Before use
shake well
Specific Gravity
0,886 ± 0,044 g/cm3
Dilutable
Can be diluted with White Spirit or Napar With Dilution the corrosion protection interval will be also reduced.
Viscosity (20oC)
158 mPa s – 1580 mPa s thixotrop
Flashpoint
spray:<0 °C bulk: 41 °C
Heat Resistance
max. 79 °C
Can be used
for all metals
Freezing Point
below -13 °C spray below -41 °C
Drying Time
Not apply on humid surfaces. Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®. HDepending on weather conditions: -dust-dry after approx. 1-2 h, -hardened after approx. 12 h
pH-Value
Neutral
Film Property
Sealing
Film Thickness
25 – 50 my
Expected Coverage
ca. 20 m2/l with 25 my
Lubrication
no
Corrosion Protection
depending on application up to 5 years
Consistence of the film
wax protection film
Specifications
No – silicon, PTFE