BRUNOX Gun Care ® can 300 ml for hunting-, sporting-, professional and collecting-guns
- cleans, lubricates and attends all metal parts - displaces humidity and protects reliable against corrosion - loosens powder-, lead-, tombac-, copper-, nickel- and black powder- residues - neutralizes hand sweat
•Excellent penetration properties; it will be formed a very thin, viscous protection film, which does not harden and become resin (contains no silicone, no PTFE, no graphite). •ehaves neutral against varnish, leather, wood, rubber, plastic and fabric. •Prevents from leak currents as contact spray. The additive TUBOLINE increases the gliding quality of all movable parts; ensures the function of repeat and automatic guns even at temperatures up to -55 °C. BRUNOX® Gun Care loosens grease, organic and mineral dirt. BRUNOX® Gun Care is available as aerosol, which contains only 3% propellant (CO2) or as bulk product. It has a flash point of 78°C.
Physical Properties
BRUNOX® Turbo-Liquide with TURBOLINE –
Appearance
transparent-bluish
Film Thickness
1 – 2 my
Specific Gravity
0,81 ± 0,03 g/cm3
Expect Coverage
approx. 100 – 110 m2/l
Viscosity (20oC)
3,6 mPa s
Lubrication
Bruggertest DIN 51347 22 N/mm2
Flashpoint
78 °C
Consistence of the film
Film non-hardening
Heat Resistance
up to 160 °C short time up to 125 °C permanent
Dielectric Strength
UD: 45 KV eff-ED: 182 KV eff/cm
Freezing Point
-54 °C
Drying Time
evaporation of the solvents within 2-4 h. H depending on weather conditions
pH-Value
neutral
Corrosion Protection
up to 12 months indoor
Film Property
penetrating
Specification
contains no silicon, PTFE, graphite
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
BEITER INSERT NOCK
The Beiter Insert-Nock has been designed to be inserted directly into Aluminum Shafts (instead of the cone or a Bushing!), but became very popular specially on Aluminum-Carbon Arrows..
The Beiter Insert-Nock is available in both the Beiter patented ASYMMETRIC shape, as well as in the SYMMETRIC Hunter-Nock. Remember to shoot with the Beiter logo on top!
Some features of Beiter Nocks, that distinguish them from other makes:
Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single Nock of one size comes out of the same mould.
The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
The Beiter Insert-Nock is asymmetric, to adapt perfectly to the asymmetric drawn string. To ensure the Nock is placed correctly, see that the notch for the nocking point, looks to the front.
The Beiter Insert-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for it. If used together, they avoid the arrow nocking out of the string at full draw and have ideal gliding surfaces.
BEITER INSERT NOCK 12/1 ή 2
12/1
12/1 Heavy
12/2
12/2/Heavy
Weight gram.
0.36
0.43
0.42
0.48
Weight grains
5.538
6.615
7.385
Diam.
4,25 mm
Colors 12/1
blue, dark green, orange ,red, white
Colors 12/2
black, green, orange, purple, red
Colors12/1&2 Heavy
green, orange, pink
Package
1 piece
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
C 40
It is as heavy as the real 1911 military hand gun. It is 99% metal except for the trigger and the hammer. The hammer is fully functional like in a real gun. It feels like you are holding a real gun! It is very powerful. It gets about 480 FPS with round BB's and 430fps with Pellets. It's an overall nice gun/replica. It's not the most accurate gun out there but the realistic look of it really makes up for that. It's very hard to tell it is an air gun, even the barrel is the size of a real bullet and the smaller barrel is hidden within it. It can shoot 8 shots off as fast as you can pull the trigger. Makes a nice sound, it is powered with c02. It is alot of fun and definitely the most realistic pistol I have found!
CROSMAN C 40 N Caliber: 0.177" (4.5mm) Scopeable: - Velocity: 430-475 fps Grip: Synthetic Loudness: Low Suggested for: Target practice Barrel Length: 4.24” Trigger Pull: - Overall Length: 8.6” Action: Double action Capacity: 8 Safety: Manual Cocking Effort: -. Power Plant: CO 2 Barrel: Rifled 6/400 Weight: 2,5 lbs Front Sights: Fixed blade Rear Sights: Adjustable for windage and elevation Energy ft.lbs 2.44 Joules 3.3 Guaranty 1 year Service-spare parts Yes
CROSMAN C 40 N
Caliber:
0.177" (4.5mm)
Scopeable:
-
Velocity:
430-475 fps
Grip:
Synthetic
Loudness:
Low
Suggested for:
Target practice
Barrel Length:
4.24”
Trigger Pull:
Overall Length:
8.6”
Action:
Double action
Capacity:
8
Safety:
Manual
Cocking Effort:
-.
Power Plant:
CO 2
Barrel:
Rifled 6/400
Weight:
2,5 lbs
Front Sights:
Fixed blade
Rear Sights:
Adjustable for windage and elevation
Energy ft.lbs
2.44
Joules
3.3
Guaranty
1 year
Service-spare parts
Yes
FOR MANUALHERE FOR SPARE PARTS DRAW HERE
The freight is inclunding in the price for delivery in Greece. You must be 18 years old to buy an airgun
WARNING :Not a toy. This airgun is recommended for adult use only. Misuse or careless use may cause serious injury or death. Read all instructions before using. Buyer and user have the duty to obey all laws about the use and ownership of this airgun. You and others with you should always wear shooting glasses to protect your eyes. BE CAREFUL - SHOOT SAFELY.
MARTO katana 221
Handmade katana by Marto, in Toledo Spain steel type AISI 440. Marto Katanas have forged and fully tempered stainless steel blades that have been polished and detailed. The blade does not rust and does not need further care. The casing is made of aluminum, lacquered.
Model
KATANA 221
Code
221
Total length
40,0 ΄΄
Blade length
27,3 ΄΄
Handle length
13,7΄΄
Weight
3,16 lb
Material
Forged Steel AISI 440
The freight is including in the price for delivery in Greece.
The above item is already in stock in our shop. Address: 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
The technical characteristics and dimensions may have some slight variations from sword to sword.
Brunox ® IX 100
High - Tec - long – term corrosion inhibitor Sealing
Application and effect long-term corrosion inhibitor Sealing for - storage in the open air and (during the winter/summer) - sea transport for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.
BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.
BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.
Technische Daten
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
olive-brown
Before use
shake well
0,886 ± 0,044 g/cm3
Dilutable
Can be diluted with White Spirit or Napar With Dilution the corrosion protection interval will be also reduced.
158 mPa s – 1580 mPa s thixotrop
spray:<0 °C bulk: 41 °C
max. 79 °C
Can be used
for all metals
below -13 °C spray below -41 °C
Not apply on humid surfaces. Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®. HDepending on weather conditions: -dust-dry after approx. 1-2 h, -hardened after approx. 12 h
Neutral
Sealing
25 – 50 my
Expected Coverage
ca. 20 m2/l with 25 my
no
depending on application up to 5 years
wax protection film
Specifications
No – silicon, PTFE