Crosman LF  22167

Powershot ammunition from Crosman is a great alternative to traditional lead pellets. The outstanding ballistic properties enhance long-range shooting for hunters, target and recreational shooters. These belted, pointed pellets hold their shape on impact for better penetration. At 5.4 grains, the Fast Flight Penetrators deliver screaming velocities and maximum penetration.

Model	LF 22167
Τype	Pointed
Cal.	5,5 mm . (22)
Head size	5,50 mm.
Weight	1,082
Weight grains	16,70
Qty/box	100
Ideal field of use :	plinking, paste control
Recommended type of weapon :	5,5-12 ft.lbs/ 7,5-16 j
Color	red

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 6 BOXES OF PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE

1322

The Model 1322 is a pneumatic pump-action air pistol utilizing .22 (5.5 mm) caliber lead pellets. The pistol's integral pump lever mechanism is located underneath the barrel, integral to the forearm. This pump lever is cycled a variable number of times (up to a maximum of ten strokes) to store increasingly pressurized air in a chamber. When the trigger is activated, an air valve dumps the pressurized air into a transfer port integral to the breech, discharging the pellet from the barrel. According to the manufacturer, a maximum velocity of up to 440 ft/s (130 m/s) was achievable with ten pump strokes, using standard 14.3-grain .22 pellets. The Model 1322 features fully adjustable square notch rear and front fixed blade sights.

H&N Spitzkugeln  airgun pellets  

Medium-weight, very accurate pellet for hunting and precision shooting at medium ranges.

Aerodynamic design for flat trajectories and high impact. Ribbed

Model	SPITZKUGELN
Τype	pointed ribbed
Cal.	5,5 mm. (.22)
Head size	.2173" / 5,52 mm.
Footsize [inches]	0.2183" 5.54 mm.
Weight	1,02
Weight grains	15,74
10-Schot Grouping (inches) 10 yds	1,338” / 34 mm.
Ballistic Soap Penetration (inches)	5,315”/ 135 mm.
Ballistic Soap Expansion (inches)	0,315”/ 8 mm
B/C	-
Qty/box	200
Ideal field of use :	field target, paste control
Recommended type of weapon :	≥12 ft.lbs/ 16 j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 6 BOXES OF  PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE

Brunox ® IX 100

High - Tec - long – term corrosion inhibitor Sealing

Application and effect
long-term corrosion inhibitor Sealing for
- storage in the open air and (during the winter/summer)
- sea transport
for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.

BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.

BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.

Technische Daten
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
Appearance		olive-brown	Before use	shake well
Specific Gravity		0,886 ± 0,044 g/cm3	Dilutable	Can be diluted with White Spirit or Napar With Dilution the corrosion protection interval will be also reduced.
Viscosity (20oC)	158 mPa s – 1580 mPa s thixotrop
Flashpoint	spray:<0 °C bulk: 41 °C
Heat Resistance		max. 79 °C	Can be used	for all metals
Freezing Point		below -13 °C spray below -41 °C	Drying Time	Not apply on humid surfaces. Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®. HDepending on weather conditions: -dust-dry after approx. 1-2 h, -hardened after approx. 12 h
pH-Value		Neutral
Film Property		Sealing
Film Thickness		25 – 50 my
Expected Coverage		ca. 20 m2/l with 25 my
Lubrication		no	Corrosion Protection	depending on application up to 5 years
Consistence of the film		wax protection film	Specifications	No – silicon, PTFE