Brunox ® IX 100

High - Tec - long – term corrosion inhibitor Sealing

Application and effect
long-term corrosion inhibitor Sealing for
- storage in the open air and (during the winter/summer)
- sea transport
for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.

BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.

BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.

Technische Daten
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
Appearance		olive-brown	Before use	shake well
Specific Gravity		0,886 ± 0,044 g/cm3	Dilutable	Can be diluted with White Spirit or Napar With Dilution the corrosion protection interval will be also reduced.
Viscosity (20oC)	158 mPa s – 1580 mPa s thixotrop
Flashpoint	spray:<0 °C bulk: 41 °C
Heat Resistance		max. 79 °C	Can be used	for all metals
Freezing Point		below -13 °C spray below -41 °C	Drying Time	Not apply on humid surfaces. Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®. HDepending on weather conditions: -dust-dry after approx. 1-2 h, -hardened after approx. 12 h
pH-Value		Neutral
Film Property		Sealing
Film Thickness		25 – 50 my
Expected Coverage		ca. 20 m2/l with 25 my
Lubrication		no	Corrosion Protection	depending on application up to 5 years
Consistence of the film		wax protection film	Specifications	No – silicon, PTFE

FLEX  EVO20 serving material

Ultra High Modulus Weight Polyethilene Ethylene  Serving (UHMWPE) EVO20 ( 3MAX) it´s our latest adition to our serving products line.  Made with UHWMPE material is twisted and bonded with a special resin and make the thread round as much as possible for better grip and more slip surface for the release.

• 3 ply UHWMPE material, twisted and bonded.
• .18 diameter.
• For recurve end and center servings.
• For compound bowstrings and cables ends.
• 10 colors at your choice.
• Compatible spools with all hand operate serving-jigs.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

VERNEY CARRON    “SAGITTAIRE SPECIAL PALOMPE”

An ideal weapon for those who want a light gun and without much recoil. Base from ergal, barrel length 66 or 71 cm, weight about 2,500 kg, stripe 7mm, proven in 1370 pressures and steel shot magnum. Triggers 2, the first to operate as single-trigger Stock oil semi-pistol or agkle from walnut.. Supplied with 3 internal choke.  Extractors.. Barrels from steel super diamond, forged steel cold.

Model	SAGITTAIRE XS 20
Code order	242 XS 20 CX 66/71
Weight	2.500 kg
System	Changable pins in front and conikal rear
Cal.	20 cal. /76 magnum
Overall length	110 / 115 c m
Capacity	2
choke	Standard choke ¾ - extra full
Rib	7 mm
wood	Sanded and oiled walnut
Sling swivels	Provided
ejections	extractors
triggers	2
receiver	ergal
stock	pistole (for english add 75,00 €) and for LEFT add 149,00 €
Proof tested	1370 + Steel shot proof tested.

VERNEY CARRON   “ JET – 16 ”

An ideal weapon for those who want a gun for all hunts. Base from steel with 71 cm barrels, weight 3,000 kilos, stripe 7mm, pressure tested to 1370. Triggers 2 oil gun stock walnut. Extractors

Model	JET 16
Code order	JET 16
Weight	3.000 kg
System
Cal.	16 cal. /70
Overall length	115 c m
Capacity	2
choke	5 chokes
Rib	7 mm
wood	Sanded and oiled walnut
Sling swivels	Provided
ejections	extractors
triggers	2
receiver	steel
stock	pistole
Proof tested	1370

RISER HOYT ARCOS

• Earl Hoyt Geometry
• Dynamic Flex Control Engineering
• Adjustable Pivot Block for obtaining perfect alignment
• Hoyts Pro Series Grip
• Weighs 2.95lbs (1338 grams)

Address : 61, Stournari str. Athens 104 32

Tel. 0030 210 5225 007 - 0030 210 5234 425RISER HOYT ARCOS

VERNEY CARRON    “SAGITTAIRE SPECIAL PALOMPE”

An ideal weapon for those who want a light gun and without much recoil. Base from ergal, barrel length 66 or 71 cm, weight about 2,500 kg, stripe 7mm, proven in 1370 pressures and steel shot magnum. Triggers 2, the first to operate as single-trigger Stock oil semi-pistol or agkle from walnut.. Supplied with 3 internal choke.  Ejectors Barrels from steel super diamond, forged steel cold.

Model	SAGITTAIRE XS 20
Code order	252 XS 20 CX 66/71
Weight	2.500 kg
System	Changable pins in front and conikal rear
Cal.	20 cal. /76 magnum
Overall length	110 / 115 c m
Capacity	2
choke	Standard choke ¾ - extra full
Rib	7 mm
wood	Sanded and oiled walnut
Sling swivels	Provided
ejections	ejectors
triggers	2
receiver	ergal
stock	pistole (for english add 75,00 €) and for LEFT add 149,00 €
Proof tested	1370 + Steel shot proof tested.

ARROWS CARBON AVALON HYBRID

 Hybrid is a carbon shaft produced to the tightest tolerances with a wide range of spines for the beginning archer of any age .

If you buy more than 20 pieces, the freight is free for deliveries into the Greek area.

2 ΜΑΧ  serving & bowstring  material

Made with aramrid fiber ( kevlar ) 2 MAX serving thread is twisted and bonded  and roll in  hand operating serving  jigs.

• .17 diameter.
• For recurves bowstrings,  end servings.
• For compound bowstrings, end servings.
• Color dark green.
• Compatible spools with all hand operate serving-jigs.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros