Brunox ® IX 50

High – Tec – long-term corrosion inhibitor
Application and effect
• high-quality lubricant
• long-term corrosion inhibitor for - storage and transportation  for drive gear, chains, cables, slides, machines, precision tools, semi-finished and finished products, vehicles, plants and all kinds of equipment.

BRUNOX® IX 50 is a non-hardening High-Tec-two-function-product, which can be used wherever long-lasting lubrication and reliable corrosion protection is required.
It forms a very compact, non-hardening anti-corrosive film, which also provides complete cover into corners and edges.

BRUNOX® IX 50 also lubricates under enormous surface pressure.

BRUNOX® IX 50 can be removed with cleaning materials (tensides) when protection is no longer required.

Physical Properties
BRUNOX® IX 50 – High – Tech – long – term corrosion inhibitor -
Appearance		olive-yellow	Expect Coverage	approx. 40 m2/l with 5 my
Specific Gravity		0,838 ± 0,02 g/cm3
Viscosity (20oC)		25 mPa s – 120 mPa s thixotrop	Lubrication	Bruggertest/DIN 51347 48 N/mm2
Flashpoint		Aerosol:<0 °C Bulk: 51 °C	Consistence of the film	film non-hardening
Heat Resistance		up to 150 °C short time up to 100 °C permanent	Before use	shake well
			Can be used	for all metals
Freezing Point		below -41°C	Drying Time	evaporation of the solvents within 2-4 h Hdepending on weather conditions
pH-Value		neutral	Corrosion Protection	Indoor: up to 3 years Outdoor: up to ½ year Covered outdoor : up to 1 year If you like a longer protection, control the film and renew it, if necessary
Film Property	penetrating
Film Thickness	5 – 20 my		Specifications	No -silicon -resins, -PTFE - acids

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

H&N TIN CLIP

Keeps all H&N tins of Finale Match, Match and Sport diabolos closed safely after

the adhesive tape has been removed. Ideal for secure transport and storage

of open tins.

 Sight 5D series

Available for most of the more popular rifles and shotguns – the inexpensive, quality-made 5D sight. These sights are patterned after the Foolproof. They have the same strength, lightweight, and neat appearance, but without the micrometer adjustments. Designed for rugged hunting use, the 5D sights are dependable and accurate. Positive locks. Clear unobstructed vision. No knobs or side plates to blot out shooter’s field of vision. The material used in the manufacture of the Williams 5D sight is one of the highest grade alloys obtainable. There has been no sacrifice of quality as we are using one of the most expensive, highest tensile strength alloys that money can buy. Laboratory tests show that the material used has a tensile strength approximately 25% greater than mild steels. This high-grade alloy is finished with an anodize in a deep blue-black that adds even further to the strength of the sight by creating an extra hard surface. (Low line of sight)

BRUNOX Gun Care ® can 100 ml
for hunting-, sporting-, professional and collecting-guns

- cleans, lubricates and attends all metal parts
- displaces humidity and protects reliable against corrosion
- loosens powder-, lead-, tombac-, copper-, nickel- and black powder-
residues
- neutralizes hand sweat

•Excellent penetration properties; it will be formed a very thin, viscous protection film, which does not harden and become resin (contains no silicone, no PTFE, no graphite).

•ehaves neutral against varnish, leather, wood, rubber, plastic and fabric.

•Prevents from leak currents as contact spray.

The additive TUBOLINE increases the gliding quality of all movable parts;
ensures the function of repeat and automatic guns even at temperatures up to -55 °C. BRUNOX® Gun Care loosens grease, organic and mineral dirt. BRUNOX® Gun Care is available as aerosol, which contains only 3% propellant (CO2) or as bulk product. It has a flash point of 78°C.

Physical Properties
BRUNOX® Turbo-Liquide with TURBOLINE –
Appearance	transparent-bluish	Film Thickness	1 – 2 my
Specific Gravity	0,81 ± 0,03 g/cm3	Expect Coverage	approx. 100 – 110 m2/l
Viscosity (20oC)	3,6 mPa s	Lubrication	Bruggertest DIN 51347 22 N/mm2
Flashpoint	78 °C	Consistence of the film	Film non-hardening
Heat Resistance	up to 160 °C short time up to 125 °C permanent	Dielectric Strength	UD: 45 KV eff-ED: 182 KV eff/cm
Freezing Point	-54 °C	Drying Time	evaporation of the solvents within 2-4 h. H depending on weather conditions
pH-Value	neutral	Corrosion Protection	up to 12 months indoor
Film Property	penetrating	Specification	contains no silicon, PTFE, graphite

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425