BITZENBURGER  FLETCHER

Bitzenburger jigs have set the industry standard for fletching tools for over 50 years. It is today’s only true precision fletching instrument used by every major manufacturer of quality arrows around the world. Unparalleled quality along with simplicity, design and precision sets this fletching tool in a class by itself. Designed by experienced archers for the perfectionist who wants the finest fletcher in the world for perfect arrow making.

The freight, for all the deliveries to the Greek area is 6,00 euros 

 Sight 5D series

Available for most of the more popular rifles and shotguns – the inexpensive, quality-made 5D sight. These sights are patterned after the Foolproof. They have the same strength, lightweight, and neat appearance, but without the micrometer adjustments. Designed for rugged hunting use, the 5D sights are dependable and accurate. Positive locks. Clear unobstructed vision. No knobs or side plates to blot out shooter’s field of vision. The material used in the manufacture of the Williams 5D sight is one of the highest grade alloys obtainable. There has been no sacrifice of quality as we are using one of the most expensive, highest tensile strength alloys that money can buy. Laboratory tests show that the material used has a tensile strength approximately 25% greater than mild steels. This high-grade alloy is finished with an anodize in a deep blue-black that adds even further to the strength of the sight by creating an extra hard surface. (Low line of sight)

Serving Shifter

The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or  the End Serving on the string (e.g. if you want to move the Nocking Point).

 Not only – and much more important! – it allows to „compact“ the serving.

 In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.

Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction… you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!

 The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver… ready to be used!

You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

Brunox ® IX 100

High - Tec - long – term corrosion inhibitor Sealing

Application and effect
long-term corrosion inhibitor Sealing for
- storage in the open air and (during the winter/summer)
- sea transport
for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.

BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.

BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.

Technische Daten
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
Appearance		olive-brown	Before use	shake well
Specific Gravity		0,886 ± 0,044 g/cm3	Dilutable	Can be diluted with White Spirit or Napar With Dilution the corrosion protection interval will be also reduced.
Viscosity (20oC)	158 mPa s – 1580 mPa s thixotrop
Flashpoint	spray:<0 °C bulk: 41 °C
Heat Resistance		max. 79 °C	Can be used	for all metals
Freezing Point		below -13 °C spray below -41 °C	Drying Time	Not apply on humid surfaces. Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®. HDepending on weather conditions: -dust-dry after approx. 1-2 h, -hardened after approx. 12 h
pH-Value		Neutral
Film Property		Sealing
Film Thickness		25 – 50 my
Expected Coverage		ca. 20 m2/l with 25 my
Lubrication		no	Corrosion Protection	depending on application up to 5 years
Consistence of the film		wax protection film	Specifications	No – silicon, PTFE