Brunox ® LUB & COR
High-Tec Maintenanceproduct
Application and effect
We are glad to present you our newest product BRUNOX® LUB & COR.
BRUNOX® LUB & COR sets new standards. At least we have realised the highly desired High-Tec-long-term corrosion inhibitor and lubricant in an attractive package.
Thanks to your suggestions we have chosen an attractive and very eco-friendly package. We are convinced that BRUNOX® LUB & COR would be a great hit for the private collector, huntsman and sport shooter.
When firearms are used, stored or transported in high humidity or in aggressive climatic conditions, they need a corrosion inhibitor which is reliable. BRUNOX® LUB & COR made it possible to protect the firearm over years.
Especially for professionals, as the police, military and hunters, it’s very important that, when the weapon is not used but is exposed to all weathers, they don’t need to preserve it every day. BRUNOX® LUB & COR protects against corrosion for about a year when the weapon is placed outdoor but under a roof. Under open air it’s protected for about half a year and indoor up to 3 years.
BRUNOX® LUB & COR forms a very thin, viscous protection film of 5-10my, which does not harden. Before using the firearm the film has to be removed with a soft absorbent cloth. The barrel should be completely clean before firing.
BRUNOX® LUB & COR is even more. It prevents not only against CORROSION but is also a LUBRICANT, a High-Tec-Lubricant for semiautomatic firearms.
RUAG, Anschütz, and Merkel have tested the usage on semiautomatic firearms and have been very enthusiastic. This product is unique and, like BRUNOX® Gun Care Spray, a product with a good price and quality relation. It contains no silicone, no PTFE and no graphite and will be available in the convienient 125ml High-Tec-Sprayer. The spray-can works without propellant. It will be delivered in multilingual (DE/FR/NL/IT/GB) alum cans. Each box contains 12 cans.
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
RUAG, Anschütz, and Merkel have tested the usage on semiautomatic firearms and have been very enthusiastic. This product is unique and, like BRUNOX® Gun Care Spray, a product with a good price and quality relation. It contains no silicone, no PTFE and no graphite and will be available in the convienient 100ml .
Brunox ® IX 50
High – Tec – long-term corrosion inhibitor Application and effect • high-quality lubricant • long-term corrosion inhibitor for - storage and transportation for drive gear, chains, cables, slides, machines, precision tools, semi-finished and finished products, vehicles, plants and all kinds of equipment.
BRUNOX® IX 50 is a non-hardening High-Tec-two-function-product, which can be used wherever long-lasting lubrication and reliable corrosion protection is required. It forms a very compact, non-hardening anti-corrosive film, which also provides complete cover into corners and edges.
BRUNOX® IX 50 also lubricates under enormous surface pressure.
BRUNOX® IX 50 can be removed with cleaning materials (tensides) when protection is no longer required.
Physical Properties
BRUNOX® IX 50 – High – Tech – long – term corrosion inhibitor -
Appearance
olive-yellow
Expect Coverage
approx. 40 m2/l with 5 my
Specific Gravity
0,838 ± 0,02 g/cm3
Viscosity (20oC)
25 mPa s – 120 mPa s thixotrop
Lubrication
Bruggertest/DIN 51347 48 N/mm2
Flashpoint
Aerosol:<0 °C Bulk: 51 °C
Consistence of the film
film non-hardening
Heat Resistance
up to 150 °C short time up to 100 °C permanent
Before use
shake well
Can be used
for all metals
Freezing Point
below -41°C
Drying Time
evaporation of the solvents within 2-4 h Hdepending on weather conditions
pH-Value
neutral
Corrosion Protection
Indoor: up to 3 years Outdoor: up to ½ year Covered outdoor : up to 1 year If you like a longer protection, control the film and renew it, if necessary
Film Property
penetrating
Film Thickness
5 – 20 my
Specifications
No -silicon -resins, -PTFE - acids