|
ΒRUΝΟΧ® ΙΧ 100 SPREY 300 ML
|
Brunox ® IX 100
High - Tec - long – term corrosion inhibitor Sealing
Application and effect
long-term corrosion inhibitor Sealing for
- storage in the open air and (during the winter/summer)
- sea transport
for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.
BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.
BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.
Technische Daten
|
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
|
Appearance
|
olive-brown
|
Before use
|
shake well
|
Specific Gravity
|
0,886 ± 0,044 g/cm3
|
Dilutable
|
Can be diluted with White Spirit or Napar
With Dilution the corrosion protection interval will be also reduced.
|
Viscosity (20oC)
|
158 mPa s – 1580 mPa s thixotrop
|
Flashpoint
|
spray:<0 °C
bulk: 41 °C
|
Heat Resistance
|
max. 79 °C
|
Can be used
|
for all metals
|
Freezing Point
|
below -13 °C
spray below -41 °C
|
Drying Time
|
Not apply on humid surfaces.
Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®.
HDepending on weather conditions:
-dust-dry after approx.
1-2 h,
-hardened after approx. 12 h
|
pH-Value
|
Neutral
|
Film Property
|
Sealing
|
Film Thickness
|
25 – 50 my
|
Expected Coverage
|
ca. 20 m2/l with 25 my
|
Lubrication
|
no
|
Corrosion
Protection
|
depending on application up to 5 years
|
Consistence of the film
|
wax protection film
|
Specifications
|
No – silicon, PTFE
|
|
|
8,07EUR
|
|
|
|
ΒRUΝΟΧ® ΙΧ 50 SPREY 400 ML
|
Brunox ® IX 50
High – Tec – long-term corrosion inhibitor
Application and effect
• high-quality lubricant
• long-term corrosion inhibitor for - storage and transportation for drive gear, chains, cables, slides, machines, precision tools, semi-finished and finished products, vehicles, plants and all kinds of equipment.
BRUNOX® IX 50 is a non-hardening High-Tec-two-function-product, which can be used wherever long-lasting lubrication and reliable corrosion protection is required.
It forms a very compact, non-hardening anti-corrosive film, which also provides complete cover into corners and edges.
BRUNOX® IX 50 also lubricates under enormous surface pressure.
BRUNOX® IX 50 can be removed with cleaning materials (tensides) when protection is no longer required.
Physical Properties
|
BRUNOX® IX 50 – High – Tech – long – term corrosion inhibitor -
|
Appearance
|
olive-yellow
|
Expect
Coverage
|
approx. 40 m2/l
with 5 my
|
Specific Gravity
|
0,838 ± 0,02 g/cm3
|
Viscosity (20oC)
|
25 mPa s – 120 mPa s
thixotrop
|
Lubrication
|
Bruggertest/DIN 51347
48 N/mm2
|
Flashpoint
|
Aerosol:<0 °C
Bulk: 51 °C
|
Consistence of the film
|
film non-hardening
|
Heat Resistance
|
up to 150 °C short time
up to 100 °C permanent
|
Before use
|
shake well
|
Can be used
|
for all metals
|
Freezing Point
|
below -41°C
|
Drying Time
|
evaporation of the solvents within 2-4 h
Hdepending on weather conditions
|
pH-Value
|
neutral
|
Corrosion
Protection
|
Indoor: up to 3 years
Outdoor: up to ½ year
Covered outdoor : up to 1 year
If you like a longer protection, control the film and renew it, if necessary
|
Film Property
|
penetrating
|
Film Thickness
|
5 – 20 my
|
Specifications
|
No
-silicon
-resins,
-PTFE
- acids
|
|
|
|
|
|
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
7,56EUR
|
|
|