|
ΒΡΘΝΟΧ® GUN CARE LIQUIDE 100 ML
|
BRUNOX Gun Care ®
for hunting-, sporting-, professional and collecting-guns
- cleans, lubricates and attends all metal parts
- displaces humidity and protects reliable against corrosion
- loosens powder-, lead-, tombac-, copper-, nickel- and black powder-
residues
- neutralizes hand sweat
•Excellent penetration properties; it will be formed a very thin, viscous protection film, which does not harden and become resin (contains no silicone, no PTFE, no graphite).
•ehaves neutral against varnish, leather, wood, rubber, plastic and fabric.
•Prevents from leak currents as contact spray.
The additive TUBOLINE increases the gliding quality of all movable parts;
ensures the function of repeat and automatic guns even at temperatures up to -55 °C. BRUNOX® Gun Care loosens grease, organic and mineral dirt. BRUNOX® Gun Care is available as aerosol, which contains only 3% propellant (CO2) or as bulk product. It has a flash point of 78°C.
Physical Properties
|
BRUNOX® Turbo-Liquide with TURBOLINE –
|
Appearance
|
transparent-bluish
|
Film Thickness
|
1 – 2 my
|
Specific Gravity
|
0,81 ± 0,03 g/cm3
|
Expect Coverage
|
approx. 100 – 110 m2/l
|
Viscosity (20oC)
|
3,6 mPa s
|
Lubrication
|
Bruggertest DIN 51347
22 N/mm2
|
Flashpoint
|
78 °C
|
Consistence of the film
|
Film non-hardening
|
Heat Resistance
|
up to 160 °C short time
up to 125 °C permanent
|
Dielectric Strength
|
UD: 45 KV eff-ED: 182 KV eff/cm
|
Freezing Point
|
-54 °C
|
Drying Time
|
evaporation of the solvents within 2-4 h. H depending on weather conditions
|
pH-Value
|
neutral
|
Corrosion Protection
|
up to 12 months indoor
|
Film Property
|
penetrating
|
Specification
|
contains no silicon, PTFE, graphite
|
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
5,24EUR
|
|
|
|
OUTDOOR PELLET CASE
|
OUTDOOR PELLETS CASE
Refillable, weather-proof outdoor box for safe transport and easy removal of
pellets under tough conditions (hunting, field, target, etc.). For clipping on to
belts or lanyards. Capacity max. 500 air rifle pellets.
|
|
6,55EUR
|
|
|
|
STABILIZER ARCTEC
|
ARCTEC CROSSTUBE STABILIZER LONG
Features Arctec Crosstube stabilizers:
· Three carbon layers using cross development technology compressed to a reduced diameter adding a high degree if rigidness
· Applying Insert Technology by means of additional reinforcement of the carbon tubes with internal stabilizer frames.
· Weights can be mounted in front or behind the damper (direct approach to targets and no decoupling of the weight that is directly placed on the stabilizer)
· Through its three pillars, the Crosstube damper eliminates vibrations more than twice as fast as conventional dampers. The damper is adjustable in hardness (by addition or removal of the damper elements)
· Very low susceptibility to wind by only 16mm diameter – independent of wind direction
· Easy fine-tuning made possible through stainless steel or aluminium weights
· The stabilizer is delivered with damper and weights (an advantage over Win & Win or Easton stabilizers)
· Packaging doubles as a protective cover (transparent tube)
· Handmade in Germany (Solingen)
Specifications:
· Small-diameter three carbon layer using cross development technology rod with only 16mm diameter.
· Weight: 140 grams at 32" (without weights and damper) - the stiffest rod with this small diameter on the market - 1/4" Arctec modular damping system - stainless steel weight (35 gram) and end weight (45 gram) included.
· Optional aluminium weights with 15 grams available.
Available lengths:
· Extender in 3", 4" and 5"
· Side-rod in: 8", 10", 12" and 14"
· Long-rod in: 28", 30", 32", 34" and 36"
ARCTEC CROSSTUBE STABILIZER LONG
|
Material
|
Carbon
|
Dimensions
|
28 ",30", 32 ", 34" and 36 "
|
Weight total
|
140 gr/32 ΄΄
|
Color
|
Βlack
|
Outsid diam.
|
16 mm
|
SPECIAL ORDER
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros |
|
6,55EUR
|
|
|
|
BEITER NOCKS PIN-OUT X10 - 145/2
|
BEITER PIN OUT NOCK X-10 145/2
Werner Beiter has invented the Asymmetric Nock! Not only: he was the first, that was able to produce specific nocks in different shapes for most arrows on the market! He developed Insert-Nocks, Outnocks, InOut-Nocks and PinOut-Nocks, to be used directly in or on shafts or on Bushings or Pins. Now Werner Beiter introduces the first Asymmetric Pin Nock, to complete the product line.
Each Nock size has only one single mould. This offers highest precision and lowest tolerances. Every single PinOut-Nock comes out of the same cavity.
The Nock does not pinch on the nocking point, it rests there with a spring effect. The working life is much higher and, very important, the Beiter Nock guarantees constant release from the bowstring, shot after shot.
The Beiter Pin-Nock is available as asymmetric or symmetric (Hunter). To ensure that a Beiter Asymmetric Nock is placed correctly, control that the notch for the nocking point looks to the front of the arrow.
The Beiter Pin-Nock can be shot without problem with all known nocking points; but the Beiter nocking point is the ideal partner for any asymmetric Beiter Nock.
Beiter Pin-Nocks should fit an all Pins on the market, so that all arrow available shafts can be used with the unique Beiter nock system.
BEITER PIN OUT NOCKX-10 145/2
|
Length
|
5.231 gr
|
Colors
|
Green, Orange, White, Blue,N. Yellow, Red,
|
Package
|
1 piece
|
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros |
|
6,55EUR
|
|
|
|
CLEANING KIT FOR PISTOLS .22 CAL
|
Cleaning kit .22MM PISTOL
Rifle cleaning kit with plastic coated steel cleaning rod
CLEANING KIT .22ΜΜ PISTOL
|
Overall length
|
27 cm
|
Handle
|
Anatomical from wood
|
Brushes
|
Wool, bristle & steel spiral
|
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
6,55EUR
|
|
|
|
|
ΒRUΝΟΧ® ΙΧ 50 SPREY 400 ML
|
Brunox ® IX 50
High – Tec – long-term corrosion inhibitor
Application and effect
• high-quality lubricant
• long-term corrosion inhibitor for - storage and transportation for drive gear, chains, cables, slides, machines, precision tools, semi-finished and finished products, vehicles, plants and all kinds of equipment.
BRUNOX® IX 50 is a non-hardening High-Tec-two-function-product, which can be used wherever long-lasting lubrication and reliable corrosion protection is required.
It forms a very compact, non-hardening anti-corrosive film, which also provides complete cover into corners and edges.
BRUNOX® IX 50 also lubricates under enormous surface pressure.
BRUNOX® IX 50 can be removed with cleaning materials (tensides) when protection is no longer required.
Physical Properties
|
BRUNOX® IX 50 – High – Tech – long – term corrosion inhibitor -
|
Appearance
|
olive-yellow
|
Expect
Coverage
|
approx. 40 m2/l
with 5 my
|
Specific Gravity
|
0,838 ± 0,02 g/cm3
|
Viscosity (20oC)
|
25 mPa s – 120 mPa s
thixotrop
|
Lubrication
|
Bruggertest/DIN 51347
48 N/mm2
|
Flashpoint
|
Aerosol:<0 °C
Bulk: 51 °C
|
Consistence of the film
|
film non-hardening
|
Heat Resistance
|
up to 150 °C short time
up to 100 °C permanent
|
Before use
|
shake well
|
Can be used
|
for all metals
|
Freezing Point
|
below -41°C
|
Drying Time
|
evaporation of the solvents within 2-4 h
Hdepending on weather conditions
|
pH-Value
|
neutral
|
Corrosion
Protection
|
Indoor: up to 3 years
Outdoor: up to ½ year
Covered outdoor : up to 1 year
If you like a longer protection, control the film and renew it, if necessary
|
Film Property
|
penetrating
|
Film Thickness
|
5 – 20 my
|
Specifications
|
No
-silicon
-resins,
-PTFE
- acids
|
|
|
|
|
|
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
|
|
7,56EUR
|
|
|
|