BRUNOX LUBRI FOOD ® 400 ML
brunox® lubri-Food® High – Tec – Allrounder for the food industry
Product description Lubricant, protection, creep oil and cleaning agent appropriate for occasional technically unavoidable contact to food, is NSF H1 registered (N° 136783 and N°137856).
Mode of working A high-tech-product that does not become resinous and is produced from NSF H1 registered ingredients. It forms a homogeneous and very efficient lubricating film which displaces humidity and protects against corrosion. BRUNOX® Lubri-Food® has an excellent penetration that guarantees an excellent loosening effect, it can also be used for the removal of boiler scale and makes tightened parts movable.
Application area All aspects of the food industry, from maintenance of production line equipment and food packaging machinery as well for agriculture, restaurant and hotel business. Can also be used by manufactures of food industry tools and equipment and machinery.
Object To reduce friction and wear and therefore increases the life span of expensive food production equipment.
Application Warning please ensure, that the electricity supply is disconnected before applying BRUNOX® Lubri-Food®.
Apply a light, even film and allow BRUNOX® Lubri-Food® to react. Only apply as much BRUNOX® Lubri-Food® as it is absolutely necessary to obtain the desired technical result. Wipe off excess with cloth. BRUNOX® Lubri-Food® should contact food as little as possible despite its official NSF H1 registration.
Physical Properties
BRUNOX® Lubri-Food® – High-Tec-Allrounder for the food industry –
Appearance
Transparent
Film Thickness
3 – 4 my
Specific Gravity
0,83 ± 0,02 g/cm3
Expect Coverage
approx. 100 – 120 m2/l
Viscosity (20oC)
85 mPa s
Lubrication
Bruggertest/DIN 51347 25 N/mm2
Flashpoint
73 °C
Consistence of the film
film does non-hardening
Heat Resistance
up to 155 °C short time up to 125 °C permanent
Protection
-displaces humidity -stops limestone
Freezing Point
below -20 °C
Can be used
for all metals
pH-Value
neutral
Specifications
- NSF H1 registered N° 136783 and N° 137856 - drinking water certificate - froth certificate - Kosher certificate - contains no: silicon, PTFE, resins, acids
Film Property
penetrating
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
Brunox ® IX 100
High - Tec - long – term corrosion inhibitor Sealing
Application and effect long-term corrosion inhibitor Sealing for - storage in the open air and (during the winter/summer) - sea transport for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.
BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.
BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.
Technische Daten
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
olive-brown
Before use
shake well
0,886 ± 0,044 g/cm3
Dilutable
Can be diluted with White Spirit or Napar With Dilution the corrosion protection interval will be also reduced.
158 mPa s – 1580 mPa s thixotrop
spray:<0 °C bulk: 41 °C
max. 79 °C
below -13 °C spray below -41 °C
Drying Time
Not apply on humid surfaces. Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®. HDepending on weather conditions: -dust-dry after approx. 1-2 h, -hardened after approx. 12 h
Neutral
Sealing
25 – 50 my
Expected Coverage
ca. 20 m2/l with 25 my
no
Corrosion Protection
depending on application up to 5 years
wax protection film
No – silicon, PTFE
BRUNOX Gun Care ® can 300 ml for hunting-, sporting-, professional and collecting-guns
- cleans, lubricates and attends all metal parts - displaces humidity and protects reliable against corrosion - loosens powder-, lead-, tombac-, copper-, nickel- and black powder- residues - neutralizes hand sweat
•Excellent penetration properties; it will be formed a very thin, viscous protection film, which does not harden and become resin (contains no silicone, no PTFE, no graphite). •ehaves neutral against varnish, leather, wood, rubber, plastic and fabric. •Prevents from leak currents as contact spray. The additive TUBOLINE increases the gliding quality of all movable parts; ensures the function of repeat and automatic guns even at temperatures up to -55 °C. BRUNOX® Gun Care loosens grease, organic and mineral dirt. BRUNOX® Gun Care is available as aerosol, which contains only 3% propellant (CO2) or as bulk product. It has a flash point of 78°C.
BRUNOX® Turbo-Liquide with TURBOLINE –
transparent-bluish
1 – 2 my
0,81 ± 0,03 g/cm3
approx. 100 – 110 m2/l
3,6 mPa s
Bruggertest DIN 51347 22 N/mm2
78 °C
Film non-hardening
up to 160 °C short time up to 125 °C permanent
Dielectric Strength
UD: 45 KV eff-ED: 182 KV eff/cm
-54 °C
evaporation of the solvents within 2-4 h. H depending on weather conditions
up to 12 months indoor
Specification
contains no silicon, PTFE, graphite