SF ARCHERY EXTENDER
Kevlar/carbon stabilizer. Ultimate is more up-graded stabilizer, which adds kevlar to carbon. This reduces effectively vibration and shocks . Carbon patterns on the surface are noce and looking good
ULTIMATE EXTENDER
Material
Carbon
Dimensions
4 ΄΄ or 5΄΄
Weight
gr.
Color
Βlack
Outsid diam.
mm
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
FCA Laser Alignment Tool
The Laser Aligner is designed to facilitate the setting up of your bow. This tools allos you to easily and accurately align limbs, center shot, stabilization, rest, riser, arrow, sights, wheels for recurve and compound bow. With this laser aligner you get a perfect alignment of all the system components bow, greatly reducing the time taken for tuning.
The freight, for all the deliveries to the Greek area is 10,00 euros
SIGHT SHIBUYA 485-9 CARBON ULTIMA ΙΙ
Proven podium topping technology.
· Updated and improved redesign of the long time favourite the Shibuya Ultima.
· Lightweight design with improved weight distribution.
· Secure and simple to use sight pin locking. Redesigned for improved hold and to prevent thread damage.
· Drive shaft dampening for a quieter shot and reduced vibration.
· High grip adjustment knobs for easy adjustment in all conditions.
· Windage fine adjustment scale for precision adjustment.
· Secure and simple lever locking mechanism.
SIGHT SHIBUYA 485-9 CARBON
9 3/4 ΄΄
204 gr.
Clicks/inch
1/480” /inch
Colors in stock
Βlack- silver
Colors on order
gold-green-red-pink-blue-orange
Compatible Apertures
8-32
Use for
RH or LH
W & W ECTENDER HMC 22 5 ΄΄
HMC 22 is WIN&WIN’s revolutionary new stabilizer constructed from modern high tensile strength carbon, making it stronger and stiffer. With its highly durable 3K carbon fabric surface, the HMC 22 stabilizing system has improved dampening qualities, shock absorbance and torque control.
Unlike other stabilizers the thickness of the HMC 22 tube wall varies, helping it to absorb high levels of shock very quickly. The rod wall measures 0.0275” (0.7mm) at the front and 0.0787” (2mm) at the base. This creates reduces movement at the end of the rod and absorbing vibration throughout the length of the stabilizer rather than pushing it back into the bow.
EXTENDER DYNAMIC CARBON 4 ΄΄
4" or 5"
22 mm
Brunox ® IX 100
High - Tec - long – term corrosion inhibitor Sealing
Application and effect long-term corrosion inhibitor Sealing for - storage in the open air and (during the winter/summer) - sea transport for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.
BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.
BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.
Technische Daten
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
Appearance
olive-brown
Before use
shake well
Specific Gravity
0,886 ± 0,044 g/cm3
Dilutable
Can be diluted with White Spirit or Napar With Dilution the corrosion protection interval will be also reduced.
Viscosity (20oC)
158 mPa s – 1580 mPa s thixotrop
Flashpoint
spray:<0 °C bulk: 41 °C
Heat Resistance
max. 79 °C
Can be used
for all metals
Freezing Point
below -13 °C spray below -41 °C
Drying Time
Not apply on humid surfaces. Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®. HDepending on weather conditions: -dust-dry after approx. 1-2 h, -hardened after approx. 12 h
pH-Value
Neutral
Film Property
Sealing
Film Thickness
25 – 50 my
Expected Coverage
ca. 20 m2/l with 25 my
Lubrication
no
Corrosion Protection
depending on application up to 5 years
Consistence of the film
wax protection film
Specifications
No – silicon, PTFE
BRUNOX Gun Care ® can 300 ml for hunting-, sporting-, professional and collecting-guns
- cleans, lubricates and attends all metal parts - displaces humidity and protects reliable against corrosion - loosens powder-, lead-, tombac-, copper-, nickel- and black powder- residues - neutralizes hand sweat
•Excellent penetration properties; it will be formed a very thin, viscous protection film, which does not harden and become resin (contains no silicone, no PTFE, no graphite). •ehaves neutral against varnish, leather, wood, rubber, plastic and fabric. •Prevents from leak currents as contact spray. The additive TUBOLINE increases the gliding quality of all movable parts; ensures the function of repeat and automatic guns even at temperatures up to -55 °C. BRUNOX® Gun Care loosens grease, organic and mineral dirt. BRUNOX® Gun Care is available as aerosol, which contains only 3% propellant (CO2) or as bulk product. It has a flash point of 78°C.
Physical Properties
BRUNOX® Turbo-Liquide with TURBOLINE –
transparent-bluish
1 – 2 my
0,81 ± 0,03 g/cm3
Expect Coverage
approx. 100 – 110 m2/l
3,6 mPa s
Bruggertest DIN 51347 22 N/mm2
78 °C
Film non-hardening
up to 160 °C short time up to 125 °C permanent
Dielectric Strength
UD: 45 KV eff-ED: 182 KV eff/cm
-54 °C
evaporation of the solvents within 2-4 h. H depending on weather conditions
neutral
up to 12 months indoor
penetrating
Specification
contains no silicon, PTFE, graphite
The freight is 6,00 € for delivery into the Greece area.