H&N Baracuda Hanter .177 Caliber
Heavy and extremely precise hunting pellet for longest distances. Advanced "Baracuda"- Design with superb aerodynamic characterstics, best punch and controlled energy- transfer. Tightest groups. Less lead-fouling and uniform groups due to special alloy and greasing. Smooth with deep hollow point.
.Model
BARACUDA HUNTER 4,50
Τype
hollow point
Cal.
0.177
Head size
.177
Footsize [inches]
.187
Weight
0,67
Weight grains
10,34
10-Schot Grouping (inches) 25/50yds
0.31’’ / 1.2 ¨
Ballistic Soap Penetration (inches)
3,35’’
Ballistic Soap Εxpansion (inches)
0.59’’
B/C
0.020
Qty/box
400
Ideal field of use :
field target, paste control
Recommended type of weapon :
≥18.5 ft.lbs/ 25 j
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
FOR ORDERS MORE THAN 50,00 € OF PELLETS THE FREIGHT IS FREE,
IN ANY OTHER CASE THE FREIGHT IS 6,00 € FOR DELIVERY INTO GREECE
JSB EXACT KING 6.35
JSB Match Diabolo a.s. first model in cal.25! Of course, it is carefully designed, precisely produced and hand-pick quality controlled so very accurate. We are confident that your rifle will love them. As for its weight it is in the middle range so it is suitable for most air guns in this caliber (and you can expect heavier and lighter variants in the future). Muzzle velocity is 175 m/s if the power of airgun is set to 16J. Muzzle velocity is 250 m/s if the power of airgun is set to 50J. Muzzle velocity is 295 m/s if the power of airgun is set to 70J.
Model
EXACT KING 6.35
EXACT KING 6.35 HEAVY
domed
6.35mm/. (.25)
6.35 mm.
1.645
2.20
25.4
33.95
350
Recommended weapon :
7,5 - 50 j
More than 50 j
FOR ORDERS MORE THAN 5 BOXES OF PELLETS THE FREIGHT IS FREE,
IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE
Brunox ® IX 100
High - Tec - long – term corrosion inhibitor Sealing
Application and effect long-term corrosion inhibitor Sealing for - storage in the open air and (during the winter/summer) - sea transport for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.
BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.
BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.
Technische Daten
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
Appearance
olive-brown
Before use
shake well
Specific Gravity
0,886 ± 0,044 g/cm3
Dilutable
Can be diluted with White Spirit or Napar With Dilution the corrosion protection interval will be also reduced.
Viscosity (20oC)
158 mPa s – 1580 mPa s thixotrop
Flashpoint
spray:<0 °C bulk: 41 °C
Heat Resistance
max. 79 °C
Can be used
for all metals
Freezing Point
below -13 °C spray below -41 °C
Drying Time
Not apply on humid surfaces. Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®. HDepending on weather conditions: -dust-dry after approx. 1-2 h, -hardened after approx. 12 h
pH-Value
Neutral
Film Property
Sealing
Film Thickness
25 – 50 my
Expected Coverage
ca. 20 m2/l with 25 my
Lubrication
no
Corrosion Protection
depending on application up to 5 years
Consistence of the film
wax protection film
Specifications
No – silicon, PTFE