Baracuda Hunter Extreme
Heavy, exceptionally accurate hunting pellet for long ranges. Deep, crossshaped hollow tip for tremendous shock effect and rapid energy transfer. Best aerodynamic properties for high accuracy. Smooth.
Model
BARACUDA HUNTER EXTREME
Τype
Hollow point
Cal.
4,5 χιλ. (.177)
Head size
.177
Footsize [inches]
-
Weight
0,60
Weight grains
9,26
10-Schot Grouping (inches) 25/50 yds
Ballistic Soap Penetration (inches)
B/C
Qty/box
400
Ideal field of use :
field target, paste control ≥ 50yds
Recommended type of weapon :
≥12.lbs/ 16 j
The above item will be in stock in our shop after 15/9/2012 Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
FOR ORDERS MORE THAN 6 BOXES OF H&N PELLETS THE FREIGHT IS FREE,
IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE
HOYT COMPOUND BOW INVICTA 40 DCX 2020
Technical specifications:
Material:
Aluminium
Axle-to-axle:
40.5"
Bracing height:
7.63"
Poundage options:
30-40, 40-50, 50-60
Mass weight:
2223
Let-off:
65%
Draw length options:
Cam 1: 25.5-27 Cam 2: 27.5-29 Cam 3: 29.5-31
Speed rating:
316 fps
Cam:
DCX
Limb:
Finish:
Anodized
Brunox ® IX 100
High - Tec - long – term corrosion inhibitor Sealing
Application and effect long-term corrosion inhibitor Sealing for - storage in the open air and (during the winter/summer) - sea transport for shafts, motors, steel coils, valves, machines, precision tools, semi-finished and finished products, agricultural and construction vehicles, plants of all types.
BRUNOX® IX 100 forms a High-Tec –anti-corrosive waxy film for metal products and machines under difficult environmental conditions. It is suitable for the most corrosive environments (salt water) and for the direct effect of adverse weather conditions. The wax-like protective film does not become brittle, remains compact and forms a perfect high-quality sealing. It can be used as cable end sealer and pipe joint protector in utilities.
BRUNOX® IX 100 can be removed by means of white spirit or petroleum solvents or BRUNOX® Turbo-Spray® when protection is no longer required.
Technische Daten
BRUNOX® IX 100 - High-Tec-Korrosionsschutz-Versiegelung -
Appearance
olive-brown
Before use
shake well
Specific Gravity
0,886 ± 0,044 g/cm3
Dilutable
Can be diluted with White Spirit or Napar With Dilution the corrosion protection interval will be also reduced.
Viscosity (20oC)
158 mPa s – 1580 mPa s thixotrop
Flashpoint
spray:<0 °C bulk: 41 °C
Heat Resistance
max. 79 °C
Can be used
for all metals
Freezing Point
below -13 °C spray below -41 °C
Drying Time
Not apply on humid surfaces. Make sure, that there will be no humidity by pretreatment with BRUNOX® Turbo-Spray®. HDepending on weather conditions: -dust-dry after approx. 1-2 h, -hardened after approx. 12 h
pH-Value
Neutral
Film Property
Sealing
Film Thickness
25 – 50 my
Expected Coverage
ca. 20 m2/l with 25 my
Lubrication
no
Corrosion Protection
depending on application up to 5 years
Consistence of the film
wax protection film
Specifications
No – silicon, PTFE