BRUNOX LUBRI FOOD ® 100 ML

brunox® lubri-Food®
High – Tec – Allrounder for the food industry

Product description
Lubricant, protection, creep oil and cleaning agent appropriate for occasional technically unavoidable contact to food, is NSF H1 registered (N° 136783 and N°137856).

Mode of working
A high-tech-product that does not become resinous and is produced from NSF H1 registered ingredients. It forms a homogeneous and very efficient lubricating film which displaces humidity and protects against corrosion. BRUNOX® Lubri-Food® has an excellent penetration that guarantees an excellent loosening effect, it can also be used for the removal of boiler scale and makes tightened parts movable.

Application area
All aspects of the food industry, from maintenance of production line equipment and food packaging machinery as well for agriculture, restaurant and hotel business. Can also be used by manufactures of food industry tools and equipment and machinery.

Object
To reduce friction and wear and therefore increases the life span of expensive food production equipment.

Application
Warning please ensure, that the electricity supply is disconnected before applying BRUNOX® Lubri-Food®.

Apply a light, even film and allow BRUNOX® Lubri-Food® to react.
Only apply as much BRUNOX® Lubri-Food® as it is absolutely necessary to obtain the desired technical result.
Wipe off excess with cloth.
BRUNOX® Lubri-Food® should contact food as little as possible despite its official NSF H1 registration.

Physical Properties
BRUNOX® Lubri-Food® – High-Tec-Allrounder for the food industry –
Appearance	Transparent	Film Thickness	3 – 4 my
Specific Gravity	0,83 ± 0,02 g/cm3	Expect Coverage	approx. 100 – 120 m2/l
Viscosity (20oC)	85 mPa s	Lubrication	Bruggertest/DIN 51347 25 N/mm2
Flashpoint	73 °C	Consistence of the film	film does non-hardening
Heat Resistance	up to 155 °C short time up to 125 °C permanent	Protection	-displaces humidity -stops limestone
Freezing Point	below -20 °C	Can be used	for all metals
pH-Value	neutral	Specifications	- NSF H1 registered N° 136783 and N° 137856 - drinking water certificate - froth certificate - Kosher certificate - contains no: silicon, PTFE, resins, acids
Film Property	penetrating

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

JVD NETTING WHITE EXTRA STRONG

• The height of the netting is 3.20m.
• The netting is available in fixed dimensions as shown below (no increments possible).
• The netting is supplied with steel cable and rings.
• The Standard netting weighs +/- 500 gr./m2 (compared to +/- 300 gr./m2 of the Standard netting and +/- 1,000 gr./m2 of the Ultra Strong one).

Upon request, with 20% prepayment

Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

For purchases outside Athens before payment by wire transfer to a bank account or by credit card and is shipped via freight forwarding company with a similar charge. 

SWORD Marto 584 Templar Knights.

Towards the end of the First Crusade, founded the Order of the Knights Templar (1118 AD), in order to prevent the newly established Kingdom of Jerusalem from the Muslims and the free access of European pilgrims to Holy Land.
A copy of the sword of the Knights Templar built the famous sword maker, MARTO. The sword consists of a silver plated handle, with gold inlays and various Templar symbols. The blade is forged steel 440 AISI with Templar symbols engraved on the blade.

Model	KNIGHT TEMPLARS
Code	584
Total length	47,24  ΄΄
Blade length	37,00΄΄
Handle length	8,66΄΄
Open cross	9,00¨
Weight	7lb  oz
Material	Forged Steel 440

The freight is including in the price for delivery in Greece.

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The technical characteristics and dimensions may have some slight variations from sword to sword.

EASTON GENESSIS

7075 Aerospace alloy finish

Hard-anodized finish

Guaranteed straightness: ± .005

Colors: Bright Blue or Orange

Weight tolerance: ± 2.5%

Strength (PSI): 90,000

UNI Bushing -installed (G UNI Bushing)

Components sold separately

N Nock

One-Piece Point

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

If you buy more than 12pieces, the freight is free for deliveries into the Greek area.

MARTO sward 586  SOLOMON

The Sword of King Solomon built in honor of the great spirit and wisdom of the monarch The sword has a length of 120.00 cm, handle is wrapped in red velvet and gilt decorations. The images depicting the Star of David and the Ark of the Covenant . The blade is stainless steel , engraved with depictions of faith and heritage .
Solomon , King of Israel , second son of David and Vistheba . reigned in Israel between 972 BC and 931pCh and was considered very wise and righteous . During his Israel flourished in all areas ,
Upon delivery once Solomon saw in  a dream Yahweh who asked him what he would prefer to give him , glory or riches wisdom . Solomon asked for wisdom . God , pleased with his choice, and gave him three riches from trade, the glory of the people of his time and a lot of wisdom . Samples of wisdom is the justice in the famous trial of two women who claimed the same child . The decision to dismembered child resulted to reveal his true mother .
With riches gathered Solomon performed numerous projects such as transportation and beautification . Erected magnificent buildings , such as the impressive palaces , where he resided with unprecedented opulence , with wives and mistresses (supplied reached one thousand ) , and the famous temple of Jerusalem on the hill of Moria , where carrying the Ark of the Covenant .

Model	KING SOLOMON
Code	586
Total length	48,0  ΄΄
Blade length	37,3 ΄΄
Handle length	10,7΄΄
Weight	7,05 lb
Material	Forged Steel 440

The freight is including in the price for delivery in Greece.

The above item is already in stock in our shop.
Address: 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The technical characteristics and dimensions may have some slight variations from sword to sword.

V- FLEX

V-FLEX is a significant development in recurve archery technology.

 The revolutionary V-FLEX vibration dampener reduces string oscillation, noise and hand-shock, resulting in improved accuracy. Its deep-groove design also increases the limb’s string groove length for shot-after-shot consistency.

 -        Reduces bow string oscillation/vibration

 -        Reduces noise

 -        Reduces hand-shock

 -        Enhanced string groove for increased consistency

 -        Works on hunting, recreational and target recurves

 -        Can increase arrow speed up to 5 fps

 -        3M® Adhesive backing for quick/easy installation

 -          Weight : 4,3 grams / each.

 Easton Shaft X23 Limited Edition

The Golden Anniversary of an unstoppable force in target archery! It was born from a desire for the ultimate in performance and precision. The strongest available alloy combined with Easton's still-secret processes and Jim Easton's unrelenting drive for perfection yielding the legendary Easton X7 - quite possibly, the most-winning single sporting goods product in history. X7 is still an unstoppable force on the podium, just as it was beginning in 1965.

Easton celebrates 50 years of X7 Olympic Gold Medals, Vegas Championships and countless other victories, with the Golden Anniversary X23 and X27 Limited Edition shafts. Dual-anodized and individually laser-etched with Jim and Greg Easton's signature, these one-of-a-kind shafts will be produced in very limited numbers, only for the 2015-16 indoor season.

Optimized for maximum diameter, indoor, World Archery regulation competition

Precision and proven X7 alloy performance

7178-T9 aerospace alloy

Diamond polished anodized silver finish

Guaranteed straightness: ± .001"

Weight tolerance: ± 3/4%

Strength (psi) 105,000

Archery Style: Compound Target, 3D Archery

Material: Aluminium

Uni Bushing included

All other components sold separately

Brunox® turbo-spray® 400ml

5 function - spray with Turboline

Application
for
• maintenance •cleaning • repair works
• production • storage • transportation

of machines, precision tools, semi-finished and finished products, vehicles, plants and electrical instruments of all kinds

BRUNOX® Turbo-Spray®, the only multi-function-spray with the additive TUROBLINE which guarantees a high capillary effect and the best coverage (100 – 120 m2/l).
BRUNOX® Turbo-Spray® is sprayed on to metal surfaces, displaces water and provides protection against humidity and aggressive environmental influences such as acid atmospheres, chimney gas-steams etc.. By applying BRUNOX® Turbo-Spray® an invisible, compact 1 – 2 my thick non-hardening anti-corrosive film is formed, providing reliable protection.
BRUNOX® Turbo-Spray® can be removed without difficulty with cleaning materials (tensides).

Application and effect

Lubricant

BRUNOX® Turbo-Spray® is a long-term lubricant based on a balanced mixture of hydrocarbons with the additive TURBOLINE.

Creep oil / Rust loosener

BRUNOX® Turbo-Spray® is a multi-component lubricant which has an excellent penetration effect. Therefore it is capable of penetrating into finest hair-chaps and spaces and, for example, loosens tightened screws in a very short time. It loosens rust and frees sticky mechanisms.

Anti-corrosion

BRUNOX® Turbo-Spray® guarantees complete corrosion protection and also conservation of hollow spaces. The hydrocarbon mixture which is responsible for this guarantees both a compact protection film and also the necessary film thickness which displaces any humidity. It forms a clear, invisible, non-hardening film which does not need to be removed in most cases. (Exception: painting). This film provides temporary protection against corrosion (approx. 6 months) and has a dirt repelling effect.

Cleaning agent

BRUNOX® Turbo-Spray® penetrates and removes mineral and organic dirt so that spots of (almost) all kinds (e.g. tar, brake dust, adhesive residues etc.) can be easily wiped off. It neutralizes hand sweat and also protects aluminum, copper, brass, chromium plated and galvanized sheet metal and stainless steel.

Contact spray

BRUNOX® Turbo-Spray® has a very low surface tension and a corresponding adhesion to metals so that leak currents will be prevented and humidity which has penetrated will immediately be displaced. It is suitable for the corrosion protection of electrical contacts in low-voltage engineering. Before spraying on electrical or electronic equipment, switch off the devices. The very high dielectric strength (UD=45KV/cm) also allows the application in connection with very sensitive (high-impedance) circuits. This property is particularly useful with electrical contacts and short circuits can be eliminated and prevented.

properties

BRUNOX® Turbo-Spray® contains • no silicone, • no PTFE • no graphite
BRUNOX® Turbo-Spray® behaves neutral against • varnish, leather, wood, rubber, plastic and fabric
BRUNOX® Turbo-Spray® contains • just 3% propellant (CO2), i.e. 97% active substance
BRUNOX® Turbo-Spray® has • a flash point of 78oC

Physical Properties
BRUNOX® Turbo-Spray – 5- function-spray with TURBOLINE –
Appearance	transparent-bluish	Film Thickness	1 – 2 my
Specific Gravity	0,82 ± 0,02 g/cm3	Expect Coverage	approx. 100 – 120 m2/l
Viscosity (20oC)	3 mPa s	Lubrication	Bruggertest DIN 51347 23 N/mm2
Flashpoint	78 °C	Consistence of the film	Film non-hardening
Heat Resistance	up to 160 °C short time up to 125 °C permanent	Dielectric Strength	UD: 45 KV eff-ED: 182 KV eff/cm
Freezing Point	-51 °C	Drying Time	evaporation of the solvents within 2-4 h. H depending on weather conditions
pH-Value	neutral	Corrosion Protection	up to 12 months indoor
Film Property	penetrating	Specification	contains no silicon, PTFE, graphite

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425