KAP BOW SQUARE

Made from anodised aluminum measuring international and Saxon.

The freight, for all the deliveries to the Greek area is 6,00 euros 

ARC SYSTEME STABILIZER LATERAL GRAVITY SHORT

The above item will be  available after order

Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

STABILIZER BEITER

As all Beiter products, the stabilizer was tested by top archers world-wide and used successfully in competitions, winning many titles and medals since its introduction 1996. Four carbon rods, positioned to form a square are held together by plastic blocks (called tuners) made of high quality thermosplasts and elastomers: the result is a new concept of stabilization. Tests have shown that the system is able to absorb more vibration, giving the archer less problems while aiming and performing the shot. The factory setting of the tuners avoids resonance in the system; the tuners themselves can be moved to offer the opportunity of an individual adaptation.
 
Beiter Centralizer Long Rods are available with Endcap in following lengths: 8¨ - 10¨-12¨

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

 Gompy Bowstringer Tip-Tip Standard BSP-2

H&N Finale match 4.49 mm Pistol pellets  

The top product for competition use. The one Olympic winners and world champions rely on. Maximum possible accuracy with maximum dimensional and weight accuracy. Tightest shot groups, clean-cut bullet holes. Minimum lead fouling and consistent shot spreads thanks to special Match alloy and lubrication. Hand sorted. Head sizes available: 4.48–4.51. Smooth.

A series that matches the firearm can certainly obtain a hole diameter of just 5mm at 10 meters after 10 shot – with a fixed barrel. In order to be able to maintain the “10” reliably with rifles in particular, you should have a test carried out with a fixed barrel at our H&N shooting ranges. Each firearm has a slightly different barrel and pressure build-up. Having the firearm checked by our specialists is definitely worth it!

Model	FINALE MATCH PISTOL 4,49
Τype	match
Cal.	4,5 χιλ. (.177)
Head size	4,49 χιλ.
Weight	0,49
Weight grains	7,56
Qty/box	500
Ideal field of use :	competition use
Recommended type of weapon :	5,5 ft.lbs / 7,5 j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 6 BOXES OF H&N PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE

FIVICS BOWSTRINGER SG-12

The freight, for all the deliveries to the Greek area is 6,00 euros 

Kovohute Lux

Model	LUX
Τype	match
Cal.	4,5 χιλ. (.177)
Head size	4,50 χιλ.
Weight	0,55
Weight grains	8,33
Qty/box	500
Ideal field of use :	shooting target
Recommended type of weapon :	5,5 ft.lbs / 7,5 j

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

FOR ORDERS MORE THAN 5 BOXES OF  PELLETS THE FREIGHT IS FREE,

IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE

Brunox® turbo-spray® 100ml

5 function - spray with Turboline

Application
for
• maintenance •cleaning • repair works
• production • storage • transportation

of machines, precision tools, semi-finished and finished products, vehicles, plants and electrical instruments of all kinds

BRUNOX® Turbo-Spray®, the only multi-function-spray with the additive TUROBLINE which guarantees a high capillary effect and the best coverage (100 – 120 m2/l).
BRUNOX® Turbo-Spray® is sprayed on to metal surfaces, displaces water and provides protection against humidity and aggressive environmental influences such as acid atmospheres, chimney gas-steams etc.. By applying BRUNOX® Turbo-Spray® an invisible, compact 1 – 2 my thick non-hardening anti-corrosive film is formed, providing reliable protection.
BRUNOX® Turbo-Spray® can be removed without difficulty with cleaning materials (tensides).

Application and effect

Lubricant

BRUNOX® Turbo-Spray® is a long-term lubricant based on a balanced mixture of hydrocarbons with the additive TURBOLINE.

Creep oil / Rust loosener

BRUNOX® Turbo-Spray® is a multi-component lubricant which has an excellent penetration effect. Therefore it is capable of penetrating into finest hair-chaps and spaces and, for example, loosens tightened screws in a very short time. It loosens rust and frees sticky mechanisms.

Anti-corrosion

BRUNOX® Turbo-Spray® guarantees complete corrosion protection and also conservation of hollow spaces. The hydrocarbon mixture which is responsible for this guarantees both a compact protection film and also the necessary film thickness which displaces any humidity. It forms a clear, invisible, non-hardening film which does not need to be removed in most cases. (Exception: painting). This film provides temporary protection against corrosion (approx. 6 months) and has a dirt repelling effect.

Cleaning agent

BRUNOX® Turbo-Spray® penetrates and removes mineral and organic dirt so that spots of (almost) all kinds (e.g. tar, brake dust, adhesive residues etc.) can be easily wiped off. It neutralizes hand sweat and also protects aluminum, copper, brass, chromium plated and galvanized sheet metal and stainless steel.

Contact spray

BRUNOX® Turbo-Spray® has a very low surface tension and a corresponding adhesion to metals so that leak currents will be prevented and humidity which has penetrated will immediately be displaced. It is suitable for the corrosion protection of electrical contacts in low-voltage engineering. Before spraying on electrical or electronic equipment, switch off the devices. The very high dielectric strength (UD=45KV/cm) also allows the application in connection with very sensitive (high-impedance) circuits. This property is particularly useful with electrical contacts and short circuits can be eliminated and prevented.

properties

BRUNOX® Turbo-Spray® contains • no silicone, • no PTFE • no graphite
BRUNOX® Turbo-Spray® behaves neutral against • varnish, leather, wood, rubber, plastic and fabric
BRUNOX® Turbo-Spray® contains • just 3% propellant (CO2), i.e. 97% active substance
BRUNOX® Turbo-Spray® has • a flash point of 78oC

Physical Properties
BRUNOX® Turbo-Spray – 5- function-spray with TURBOLINE –
Appearance	transparent-bluish	Film Thickness	1 – 2 my
Specific Gravity	0,82 ± 0,02 g/cm3	Expect Coverage	approx. 100 – 120 m2/l
Viscosity (20oC)	3 mPa s	Lubrication	Bruggertest DIN 51347 23 N/mm2
Flashpoint	78 °C	Consistence of the film	Film non-hardening
Heat Resistance	up to 160 °C short time up to 125 °C permanent	Dielectric Strength	UD: 45 KV eff-ED: 182 KV eff/cm
Freezing Point	-51 °C	Drying Time	evaporation of the solvents within 2-4 h. H depending on weather conditions
pH-Value	neutral	Corrosion Protection	up to 12 months indoor
Film Property	penetrating	Specification	contains no silicon, PTFE, graphite

The freight is 6,00 € for delivery into the  Greece area.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425