Serving Shifter
The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or the End Serving on the string (e.g. if you want to move the Nocking Point).
Not only – and much more important! – it allows to „compact“ the serving.
In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.
Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!
The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver ready to be used!
You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
RISER HOYT ARCOS
Handle
Right or LeftHand
Length
25¨
Weight
2,95 lbs
Colors
Black, blue, red, white and grey
For the selection the correct size of bow you should give us your height and weight
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425RISER HOYT ARCOS
CHESTGUARDERA FOR WOMEN
· Light and comfortable, fits all morphologies, adjustable thanks to Velcro system, Ambidextrous product
CHESTGUARD FEMME ERA
Material
Polyester
Size
XS/ S-M / L-XL / XXL / XXXL
Color
Black
HOYT HANDLE XCEED GP 2020
Formula fitting recurve riser from Hoyt.
The most dynamic and responsive feeling riser from Hoyt to date.
Key features:
String Tension Technology settings: There are three distinct settings you can choose from. With the limb rockers in position number one, referred to as the Ultimate Performance Setting, you will achieve the highest level of string tension, which is optimal for those looking for a more aggressive pull through the clicker in high pressure, high adrenaline situations. On the opposite adjustment spectrum, position number three, referred to as the Ultimate Smoothness Setting, the string tension is the lowest. This helps the limbs feel smoother through the clicker, especially during the last 1 to 2 millimeters of the draw cycle. Position number 2 is considered a hybrid setting, for those looking for a combination of performance and smoothness.
Aluminium
25”
1.270 gram.
RH or LH
Finish
Anodized