Cleaning kit 9MM PISTOL
Rifle cleaning kit with plastic coated steel cleaning rod
CLEANING KIT 9ΜΜ PISTOL
Overall length
27 cm
Handle
Anatomical from wood
Brushes
Wool, bristle & steel spiral
The freight is 6,00 € for delivery into the Greece area.
The above item is already in stock in our shop. Address : 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
Brunox ® IX 50
High – Tec – long-term corrosion inhibitor Application and effect • high-quality lubricant • long-term corrosion inhibitor for - storage and transportation for drive gear, chains, cables, slides, machines, precision tools, semi-finished and finished products, vehicles, plants and all kinds of equipment.
BRUNOX® IX 50 is a non-hardening High-Tec-two-function-product, which can be used wherever long-lasting lubrication and reliable corrosion protection is required. It forms a very compact, non-hardening anti-corrosive film, which also provides complete cover into corners and edges.
BRUNOX® IX 50 also lubricates under enormous surface pressure.
BRUNOX® IX 50 can be removed with cleaning materials (tensides) when protection is no longer required.
Physical Properties
BRUNOX® IX 50 – High – Tech – long – term corrosion inhibitor -
Appearance
olive-yellow
Expect Coverage
approx. 40 m2/l with 5 my
Specific Gravity
0,838 ± 0,02 g/cm3
Viscosity (20oC)
25 mPa s – 120 mPa s thixotrop
Lubrication
Bruggertest/DIN 51347 48 N/mm2
Flashpoint
Aerosol:<0 °C Bulk: 51 °C
Consistence of the film
film non-hardening
Heat Resistance
up to 150 °C short time up to 100 °C permanent
Before use
shake well
Can be used
for all metals
Freezing Point
below -41°C
Drying Time
evaporation of the solvents within 2-4 h Hdepending on weather conditions
pH-Value
neutral
Corrosion Protection
Indoor: up to 3 years Outdoor: up to ½ year Covered outdoor : up to 1 year If you like a longer protection, control the film and renew it, if necessary
Film Property
penetrating
Film Thickness
5 – 20 my
Specifications
No -silicon -resins, -PTFE - acids
OUTDOOR PELLETS CASE
Refillable, weather-proof outdoor box for safe transport and easy removal of
pellets under tough conditions (hunting, field, target, etc.). For clipping on to
belts or lanyards. Capacity max. 500 air rifle pellets.
Crosman CO2 caps.88 gram.
Model
CO2 CAPS 88 gram.
Qty
pieces
Availability
YES
MARTO SWORD 590
WALLAS SWORD
The Wallace Sword is an antique claymore purported to have belonged to William Wallace (1272–1305), a knight and Scottish patriot who led a resistance to the English occupation of Scotland during the Wars of Scottish Independence. It is said to have been used by William Wallace at the Battle of Stirling Bridge in 1297 and the Battle of Falkirk (1298).The shaft of the sword measures 4 feet 4 inches (132 cm) in length and including the tip 5 feet 6 inches (168 cm). The breadth of the blade varies from 2.25 inches (5.7 cm) at the guard to 0.75 inches (1.9 cm) before the point. The sword weighs 6.0 pounds (2.7 kg).
It has been alleged that after William Wallace's execution in 1305, Sir John de Menteith, governor of Dumbarton Castle received the sword in August of that year. But there are no records to that effect. Two hundred years later, in 1505, accounts survive which state that at the command of King James IV of Scotland, the sum of 26 shillings was paid to an armourer for the "binding of Wallace' sword with cords of silk" and providing it with "a new hilt and plomet" and also with a "new scabbard and a new belt". This repair would have been necessary because, according to legend, Wallace's original scabbard, hilt and belt were said to have been made from the dried skin of Hugh Cressingham, one of the English commanders at the Battle of Stirling Bridge.No other written records of the sword are found for a further three centuries. In 1875 a letter from the War Office informed that the sword, in 1825 was sent to the Tower of London to be repaired. At that time it was submitted to a Dr Samuel Meyrick by the Duke of Wellington for examination.Dr Meyrick was an authority on ancient swords, but he estimated the age of the sword by examining the mountings only, which as we know were replaced early in the 16th century. Thus he concluded that the sword could not date from earlier than the 15th century. However, he did not take account of the blade, which must have been of some importance for James IV to have it bound in silk and give it a new scabbard, hilt and belt, and it was also described then as the "Wallas sword". The sword was recovered from Dumbarton by Charles Rogers, author of The Book of Wallace. Rogers, on 15 October 1888, renewed a correspondence with the Secretary of State for War, with the result that the Major General commanding forces in North Britain was authorised to deliver the weapon to his care for preservation in the Wallace Monument.
WILLIAM WALLAS
Code
590
Total length
40,00 ΄΄
Blade length
΄΄
Handle length
Weight
lb oz
Material
Forged Steel 440
The freight is including in the price for delivery in Greece.
The above item is already in stock in our shop. Address: 61, Stournari str. Athens 104 32 Tel. 0030 210 5225 007 - 0030 210 5234 425
The technical characteristics and dimensions may have some slight variations from sword to sword.
Cleaning kit .22MM PISTOL
CLEANING KIT .22ΜΜ PISTOL