STABILIZER BEITER

As all Beiter products, the stabilizer was tested by top archers world-wide and used successfully in competitions, winning many titles and medals since its introduction 1996. Four carbon rods, positioned to form a square are held together by plastic blocks (called tuners) made of high quality thermosplasts and elastomers: the result is a new concept of stabilization. Tests have shown that the system is able to absorb more vibration, giving the archer less problems while aiming and performing the shot. The factory setting of the tuners avoids resonance in the system; the tuners themselves can be moved to offer the opportunity of an individual adaptation.
 
Beiter Centralizer Long Rods are available with Endcap in following lengths: 26”, 28”, 30”, 33”, 35”, 37”, 41”, 45”; according to their length these can be ordered with 2, 3, 4 or 5 tuners.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros 

 MEYER  FLETCHER

With the new Meyer Fletching Jig Three at Once all three vanes can be fletched at the same time.

Significant differences to other products:

All lengths of vanes can be used

Supports all shaft diameters

The angle of the vane can be adjusted individually and repeatably set

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

Serving Shifter

The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or  the End Serving on the string (e.g. if you want to move the Nocking Point).

 Not only – and much more important! – it allows to „compact“ the serving.

 In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.

Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction… you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!

 The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver… ready to be used!

You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!

 The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425

The freight, for all the deliveries to the Greek area is 6,00 euros

OUTDOOR PELLETS CASE

Refillable, weather-proof outdoor box for safe transport and easy removal of

pellets under tough conditions (hunting, field, target, etc.). For clipping on to

belts or lanyards. Capacity max. 500 air rifle pellets.

DENIX 707

This fine reproduction of western holster decorated with horse motifs, and was used to carry a revolver .45 Single Action Army model.

The freight is 6,00 euros for delivery inτο  Greece.

The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32

Tel. 0030 210 5225 007 - 0030 210 5234 425