|
|
|
|
CARBON SHAFT AVALON TEC ONE
|
|
CARBON SHAFT AVALON TEC ONE
The straightness tolerance on the Avalon TEC ONE is the best in its price range in todays market. Its slim design prevents any wind drag on the outdoor field, making it an excellent arrow that will push your boundaries and take your scores to the next level.
-Full carbon shaft with straightness tolerance of ± .001"
- Pin insert included
|
CARBON SHAFT AVALON TEC ONE
|
|
SIZE
|
SHAFT WEIGHT
Grains/inch
|
SPINE
|
LENGTH
inch
|
WEIGHT OF POINTS
grains
|
NOCK
|
|
1300
|
4,2
|
1300
|
32’’
|
60-80
|
PIN NOCK
|
|
1100
|
4,9
|
1100
|
|
1000
|
5,1
|
1000
|
|
900
|
5,8
|
900
|
|
800
|
6,0
|
800
|
80-100
|
|
700
|
6,5
|
700
|
|
600
|
6,9
|
600
|
|
500
|
8,1
|
500
|
|
400
|
9,1
|
400
|
100-120
|
|
|
|
574,63EUR
|
|
|
|
|
ARROW SHAFT EASTON X-10 PROTOUR
|
|
ARROWS SHAFT EASTON X-10 PROTOUR
· Lightweight carbon fiber bonded to a precision 7075 alloy core
· Guaranteed straightness: ± .0015”
· 9-micron polished carbon finish
· Weight tolerance: ± 0.5 grains
· Components—sold separately
|
|
|
574,63EUR
|
|
|
|
|
H & N CROW MAGNUM PELLETS
|
|
H&N Crow Magnum .22 Caliber
Medium weight, hunting pellet with flat trajectory for medium ranges. Maximum shock effect and deformation of pellets. Smooth with large hollow point.
|
Model
|
CROW MAGNUM
|
|
Τype
|
hollow point
|
|
Cal.
|
5,5 χιλ. (.22)
|
|
Head size
|
5,52 χιλ. (.2173)
|
|
Footsize [inches]
|
5,83 χιλ.(.2283)
|
|
Weight
|
1,18
|
|
Weight grains
|
18,21
|
|
10-Schot Grouping (inches) 25yds
|
1,259 "
|
|
Ballistic Soap Penetration (inches)
|
4,33 "
|
|
Ballistic Soap Εxpansion (inches)
|
0,59 ΄΄
|
|
B/C
|
0.012
|
|
Qty/box
|
200
|
|
Ideal field of use :
|
field target, paste control
|
|
Recommended type of weapon :
|
≥ 12 ft.lbs / 16 j
|
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
FOR ORDERS MORE THAN 6 BOXES OF H&N PELLETS THE FREIGHT IS FREE,
IN ANY OTHER CASE THE FREIGHT IS 6 € FOR EACH DELIVERY INTO GREECE
|
|
|
5,24EUR
|
|
|
|
|
String-Tool, Pair #1 (9,5mm) (12,7mm-1/2")
|
|
Serving Shifter
The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or the End Serving on the string (e.g. if you want to move the Nocking Point).
Not only – and much more important! – it allows to „compact“ the serving.
In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.
Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction
you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!
The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver
ready to be used!
You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!
The above item is already in stock in our shop.
Address : 61, Stournari str. Athens 104 32
Tel. 0030 210 5225 007 - 0030 210 5234 425
The freight, for all the deliveries to the Greek area is 6,00 euros
|
|
|
8,24EUR
|
|
|
